The DEWALT DW721KN Radial Arm Saw has a solid cast iron arm and 4 roller bearings in the motor head assembly ensure high accuracy and durability. Strengthened column assembly and base arrangement supports the extra arm length. Supplied pre-assembled and adjusted, delivered in a wooden crate for maximum transportation protection. Quiet maintenance free induction motor delivers high power even at the maximum cutting capacities of the machine. Simple yet positive controls and adjustment scales enable the width, depth and angle of cut to be set with accuracy in seconds. Supplied with: 1 x 32 Tooth 300mm Saw Blade, 1 x Large Dust Shroud with 4in Outlet, 1 x Set of Assembly Tools, 1 x Automatic Safety Return, 1 x Blade Brake and 1 x Legstand. Specification Input Power: 2,000WNo Load Speed: 3,000/min. Cutting Speed: 36m/sec.Blade: 300 x 30mm BoreCapacity: Crosscut: @90°: 507mm, @45°: 342mm, Depth: @90°: 90mm, @45º: 60mmWeight: 115kg
The DEWALT D024K 13mm Percussion Drill has been designed with low weight in mind to ensure the drill is easy to use and to help reduce user fatigue on long drilling applications. The compact design enables comfortable use and allows access to tight spaces. There is a sensitive soft trigger with variable speed switch which allows a user to drill slowly for precision accuracy when starting to drill a hole, while the rubber back handle increases comfort to the user in drilling and hammer drilling applications. The lock-on button gives the user the option to keep the machine continually running when doing repetitive operations. Suitable for drilling in concrete, masonry, steel, wood and fixings. Supplied with: 1 x Chuck Key, 1 x Multi-Position Side Handle, 1 x Depth Stop, 1 x Heavy-Duty Carrying Case and 1 x Instructions. Specification Chuck: 13mm Keyed, 1/2in-20 UNF.Input Power: 701 Watt.No Load Speed: 0-2,800/min.Impact Rate: 0-47,600/bpm.Capacity: Concrete: 16mm, Steel: 13mm, Wood: 25mm.Weight: 1.82kg.The DEWALT D024K 13mm Percussion Drill 240 Volt Version.
The Rapid Airtac PS101 Pneumatic Stapler is one of the handy range of pneumatic staplers, small and lightweight and ideal for DIY. Easy to use, applications include textiles, leather, light joinery, tapestry, labelling and upholstery. It fires Rapid No. 53 fine wire staples which are barely visible and have minimal effect on fibres. It has a long nose for precise work with a no-mar pad to protect surfaces and a flat front for easy access in difficult areas. The 360° adjustable air-system ensures you never get exhaust-air in your face. The quick load magazine system ensures you can reload consumables quickly and easily when needed. It is a lightweight, long lasting die cast aluminium stapler with a grip-friendly handle for best comfort. It comes in a hard plastic case including oil pot, hex wrenches, safety glasses and a box of 300 No. 53 staples with a 10mm leg length. Compatible with Rapid No. 53 Staples 6-16mm. There is no limitation in fire rate and all are covered by a 2 year guarantee. Trigger Type: Contact Actuation Trigger.Operating Pressure: 5-7 Bar.Air Consumption: 0.26 – 0.29 Litre.Fires: Rapid No. 53 Staples 6-16mm.Fastener Capacity: 190 staples.Nose Length: 22mm.Nailing Distance: To Wall: 14mm.
The Hozelock 7606 Jet Pump is compact and robust. For safety purposes it has a motor heat sensor and hydraulic heat sensor. Supplied with: 1x Suction Kit 7m1x Integrated Filter1x Multistage Connector 1x Turbo Quick Connector Specification: Input Power: 600WMax. Delivery Capacity: 4,000L/hPressure: 3.5 bar
A range of replacement bags and filters that are suitable for the Metabo SPA 1101, SPA 1200 & SPA 1700 chip extractors.Replacement Fine Filter (0.2 Micron) for the SPA 1101 chip extractor.
The Makita PF1100 Submersible Drainage Pump is a powerful and versatile water pump that can be used for draining flooded rooms, tanks and irrigation of orchards and gardens. This robust pump is is only suitable for clean water and permits particles up to 5mm. For your convenience the Pump also has an integrated handle for easy transportation and storage as well as a hose connector. The pump has a durable stainless steel body that provides maintenance free operation. Specification Input Power: 1,100 Watt.Max Submersion Depth: 5m.Max Pumping Capacity: 250 l/min.Max Solids Diameter: 5mm.Max Head: 9m.Min Suction Level: 25mm.Weight: 6.74kg.
The Steinel HG2320E LCD Heat Gun offers a digital precision tool for temperature-critical materials. The ceramic heaters temperature can be infinitely varied over a range of 80-650°C at the thumbwheel. Integrated thermal cut-out eliminates the risk of overheating. Airflow can be controlled in 2 stages from 150–500 l/min. Its LCD display shows temperature in 10°C steps, includes heat build-up warning function and residual-heat indicator. Fitted with a brushless motor, rated for over 1,000 hours of operation and an optimised weight balance with ergonomically shaped, soft inlay handle that permits fatigue-free work. The 3m cable provides greater freedom of movement, for high demanding workloads. To ensure a reliable work process, the LOC function can be used to lock all settings on the tool. Service-friendly, the power cord can be changed without opening the enclosure. Specification Input Power 240v: 2,300W.110v: 1,400W.Airflow: 150–500 L/min.Air Temperature: 80-650°C .Weight: 1.03kg.The Steinel HG2320E LCD Heat Gun 1,400 Watt 110 Volt Version.
The HiKOKI H60MC SDS Max Demolition Hammer offers a single speed and a robust, functional design. Its powerful motor produces a high impact rate of 1600/bpm and an impact energy of 22 joules. The variable lock mechanism can be adjusted at a 12-step angle. It has a single-step holder that makes it easy to change between bits, depending on jobs. Supplied with: 1 x Side Handle, 1 x Bull Point, 1 x Carrying Case. Specification: Mode: Chisel OnlyInput Power: 1,300WImpact Rate: 1,600/bpm, 22 JoulesTool Holder: SDS MaxOverall Length: 570mmWeight: 10.0kg
The HiKOKI DV20VB2 Rotary Impact Drill is a high powered, variable speed drill with 2-speed gearbox and reverse function. Fitted with a soft grip handle. Supplied with: 1 x Side Handle, 1 x Depth Stop, 1 x Carrying Case Specification: Chuck: 13mm KeylessInput Power: 790WNo Load Speed: 0-1,000 and 0-3,000/min.Impact Rate: 0-13,000/39,000/bpmCapacity: Concrete: 20mm, Steel: 13mm, Wood: 40mmCable Length: 2mWeight: 2.2kg1 x HiKOKI DV20VB2L 13mm Keyless Rotary Impact Drill 110V version.
The DEWALT DCS777 FlexVolt XR Cordless Mitre Saw is fitted with an XPS shadow line cut indicator that provides fast, accurate alignment of the blade whilst illuminating the work piece for increased productivity, with no adjustment required. The base and fence has been machined to meet the accuracy requirements of the most demanding applications. With a head lock function that allows the head to be fixed, restricting the traverse function for trim applications and ease of transport. Intergrated positive mitre stops at 15°, 22.5°, 30° and 45° with a quick release mitre mechanism up to 50°. Sliding left-hand fence with measuring scale for improved material support and a compact internal rail design for a large cutting capacity whilst remaining transportable. DCS777T2: 2 x 18/54V 6.0/2.0Ah XR Li-ion BatteriesDCS777N: Bare Unit, No Battery or Charger Specification No Load Speed: 6,300/min.Blade: 216 x 30mm BoreCapacity (mm): 90°/90°: 270x62, 90°/45°: 270x48, 45°/90°: 190x62, 45°/45°: 190x48Max. Depth of Cut: 80mmMitre Cut (Right/Left): 50°/50°Bevel Capacity: 48°Weight: 14kgThe DEWALT DCS777N FlexVolt XR Cordless Mitre Saw is supplied as a Bare Unit, NO battery or charger supplied.
The Lumatic Cordless Grease Gun is fitted with a powerful DC motor drive and a planetary gearbox. Suitable for 400g cartridges or 500g bulk fill. Develops up to 400 bar pressure. Supplied with: 1 x 12 Volt 1.5Ah Li-Ion Battery, 1 x 750mm Delivery Hose, 1 x Coupler, 1 x Charger and 1 x Carry Case.
The DEWALT DWS777 216mm XPS Crosscut Mitre Saw has been fully upgraded from the previous model. It includes XPS Shadow Line cut technology for accurate alignment and a DEWALT Airlock compatible dust port. It has a traditional pull and tilt design. The fence and base have been re-engineered to new standards making this saw more accurate and heavy-duty. There's a new head lock feature which enables users to fix the head of the saw and therefore restrict the traverse, perfect for trimming and groove cutting. With 5 pre-set mitre stops at 0°/15°/22.5°/30°/45°, as well as fixed left and right hand fences with measurements on them. Supplied with 24 tooth TCT blade. Specifications: Input Power: 1,800WNo Load Speed: 6,300/min.Blade: 216 x 30mm BoreCapacity: Max. Depth: 62mm, Max. Cross Cut: 270mmMitre Cut (Right/Left): 50°/-50°Bevel Capacity: 48°Weight: 14kgDEWALT DWS777 216mm XPS Crosscut Mitre Saw 110 Volt Version
The DEWALT DCS7485 XR FlexVolt Cordless Table Saw is fitted with a powerful, brushless motor for high performance in all applications. With a cast table top design, rack and pinion fence system, front and rear fence lock and large, clear scales combine to give an extremely accurate and easy to use saw. The fence system provides 610mm of rip capacity in a portable design for cutting large sheet materials to size. The saw is fitted with a steel roll cage that helps to protect against jobsite drops and impacts. Its overload protection system ensures a powerful performance, even in hard, wet or frozen woods. With a quick bevel lock and a large scale for easy, accurate adjustments. DCS7485T2: 2 x 18/54V 6.0/2.0Ah Li-ion Batteries.DCS7485N: Bare Unit, No Battery or Charger. Specification No Load Speed: 5,800/minBlade: 210 x 30mm BoreRipping Capacity: Right: 610mm, Left: 318mmDepth of Cut: @90º: 65mm, @45º: 45mmBevel Capacity: -3° to 48°Table Size: 485 x 485mmWeight: 21.5kgThe DEWALT DCS7485N FlexVolt XR Table Saw is supplied as a Bare Unit, NO battery or charger supplied.
The DEWALT DCD701 XR Sub-Compact Drill Driver has an efficient brushless motor that gives 15% more runtime than previous generation. Lightweight (0.9kg) design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. The state of charge battery pack allows users to keep track of battery charge easily to prevent running out of battery during a job. Compatible with your existing 10.8V batteries and tools. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger, 1 x Belt Hook and 1 x TSTAK compatible Carry Case. Specification: Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Max. Torque: 57.5Nm, 15 SettingsCapacity: Wood 20mmWeight: 0.9kg
The Record Power BS250/AW Stand & Wheel Kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis. Simply depress the foot pedal and the machine is lifted onto castors for easy movement, press the foot pedal again to lower the bandsaw onto its legs again.
The HiKOKI SV1813DA Random Orbit Sander comes with a high performance brushless motor and easy to use variable speed dial, allowing you to set the ideal sanding speed for your application. The universal hook and loop sanding pad allows for easy changing of sanding discs. A dust-sealed switch helps to prolong tool life, while the body features comfortable grip areas for optimum comfort and control. Supplied with a fabric dust bag for easy dust collection. It can also be attached to a dust extractor if required. Bare Unit, NO battery or charger supplied. Specifications: Oscillating Speed: 7,000-11,000/min.Orbit Diameter: 3mm.Paper Fastening: Hook & Loop.Pad/Paper Size: 125mm.
The Metabo ASC30 Li-Ion Charger for slide type batteries, 14.4 to 18 Volt. It features AIR COOLED charging technology. It has a low stand-by input power, and a charging time of approximately 30 minutes at 1.3Ah. Voltage: 14.4 to 36 Volt.Battery Chemistry: Li-Ion.Charging Current: 3 A.
The DEWALT DWST1-81079 TSTAK™ Radio also doubles up as an XR/FlexVolt battery charger. It offers FM, AM and DAB+, with a 45 Watt output. Fully compatible with the TSTAK™ system, incorporating the usual stacking latches.It also incorporates shock absorbing rubber bumpers on all 4 corners for tough on site protection. This heavy-duty site radio has 2 mid range speakers on the front, 2 more mid range speakers on the back as well as 2 powerful sub-woofers on the bottom, this combination provides excellent sound quality.The radio can be controlled remotely via your Android or Apple device using the DEWALT Mobile App, allowing for complete control of the device on site, and with BLE (Bluetooth Low Energy), you stay connected without sacrificing your battery.Supplied as a Bare Unit, no batteries are included.Input Power: AC or 18V XR & FlexVolt DEWALT Batteries.Radio: FM, AM and DAB+.
The DEWALT DCK694P3 Brushless 3 Speed 6 Piece Kit, contains the following: 1 x 18V DCD995 Brushless XRP Hammer Drill with a tough three speed all metal transmission for increased runtime and longer tool life. Part of the intelligent XR Lithium Ion Series designed for efficiency and faster applications. Chuck: 1.5-13mm. No Load Speed: 0-450/0-1,300/0-2,000/min. Impact Rate: 0-7,650/0-22,100/0-34,000/min. Max Torque: 80Nm. Drilling Capacity Wood: 50mm, Steel: 13mm,Masonry: 16mm. 1 x 18V DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hex.No Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpm.Max Torque: 165Nm.Capacity: Bolt M12. 1 x 18V DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18V DCG412 Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18V DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18V DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x DS300 TOUGHSYSTEM™ Toolboxes
The Record Power RSBG8 is an 200mm bench grinder with a smooth running induction motor. Now in the green and silver livery of this premium machine and boasting a five year guarantee (Industrial use 1 year), this compact 200mm bench grinder features a quiet, smooth running, powerful 500 watt induction motor to ensure smooth running and optimal performance. Adjustable tool rests and spark guards complement two kinds of grind stone, a 25mm wide coarse grey wheel and a 40mm wide white stone with a fine grit for more delicate applications. Specification Input Power: 400 Watt.Disc Speed: 2,950/Min (40M/Second). Stone Diameters: 203mm (8in).Fine Stone Width: 40mm.Coarse Stone Width: 20mm.Weight: 12kg.
This Vitrex power mixer is ideal for mixing cement, plaster, grout and adhesives, fillers, paint plus other mortars for construction. The mixer is lightweight for comfortable handling and carrying, and has adjustable and lockable speed control for continuous operation. The metal handle acts as a rest when placing the mixer down, thus protecting the mixer head. Specification Mixing Paddle: 120mm, M14 Thread.Input Power: 850 Watt.No Load Speed: 0–550/min.Weight: 3.9kg.Vitrex Power Mixer 850 Watt 240 Volt Version.
