The Makita HR3541C Rotary Hammer is fitted with Anti-Vibration Technology for increased user protection. Fitted with a soft start and able to maintain constant speed under load, this machine is truly versatile. The torque limiter stops the drill when the bit hits against reinforcements and it has a built-in job light. It has 3-modes of operation: rotary only, hammer only and rotary hammer. Supplied with a side handle, depth gauge, bit grease and a carry case. Specification Input Power: 850WNo Load Speed: 315-630/min.Impact Rate: 1,650-3,300/bpmImpact Energy: 6.1 joulesCapacity: Concrete 35mm, Core Diameter (TCT) 90mmWeight: 5.6kg All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Drilling: 2.5 m/sec²Vibration Chiselling: 12.5 m/sec²Vibration Hammer Drilling: 18 m/sec²Vibration K Factor: 1.5 m/sec²Noise Sound Pressure: 93 dB(A)Noise SoundPower: 104 dB(A) Noise K Factor: 3 dB(A)1 x Makita HR3541FC SDS Max AVT Rotary Hammer 850W 110V Version
Einhell Air Tool 5 Piece Kit containing: 1 x Tyre inflator with pressure gauge. 1 x Blow out gun.1 x Spiral air hose with quick coupling.1 x Oil spray gun with suction cup.1 x Paint spray gun with gravity cup.
The Einhell TC-SD3.6LI Screwdriver has right / left turn, 3 step LED battery capacity indicator, bright LED light for poorly lit areas and a locking sleeve. There is a locking button for the turnable handle to lock securely in the desired position when in use. Complete with a soft-grip handle for added grip and control. Comes with: 4 x Screwdriver Bits, 1 x Holster and 1 x Charger. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 200/Min.Charging Time: 3-5 Hours.Weight: 0.4kg.
The DEWALT DCE531 XR Concrete Vibrator removes air from concrete forms to strengthen concrete and improve consistency of mix. The motor and drive shaft are sealed for improved durability. Lightweight and compact design, suitable for single person operation. A tool-free locking nut allows easy removal of the shaft for transportation. Bare Unit, No Battery or Charger. Specification: Power Output: 360WVibrations per minute: 15,000/vpmShaft Length: 1.2mHead Diameter: 28.6mmHand/Arm Vibration: 2.8m/s² Vibration/Uncertainty: 1.6m/s²Weight: 3.08kg
The STANLEY SXGB150E Bench Grinder is equipped with two grinding wheels (36 and 60 Grit). This essential workshop machine has a powerful, silent induction motor and a range of safety features for maximum user protection.
Transparent spark screens for increased safety.
Embedded magnifying glass in each spark guard.
Solid base with anti-vibration supports to prevent wobbling.
Tiltable metal workpiece rests for convenience.
Cooling tray located on the base for effective operation.
The STANLEY SXGBL150E Bench Grinder is equipped with a grinding wheel and a steel polishing brush. This essential workshop machine has a powerful, silent induction motor and a range of safety features for maximum user protection.Fitted with a transparent spark screen, on the disc side, for increased safety. The spark guard features an embedded magnifying glass. The solid base with anti-vibration supports prevents it from wobbling during operation. It also features tiltable, metal workpiece rests and a cooling tray (located on the base). Suitable for all finishing work: polishing, sanding and roughing.Supplied with one grinding wheel and one steel polishing brush.Specifications:Voltage: 240V.Input Power: 330W.No Load Speed: 2,980/min.Grinding Wheel Size: 150 x 20 x 12.7mm.Sanding Belt Size: 690 x 50mm.Weight: 10.0kg.
The STANLEY SXBW105E Portable Band Saw is ideal for cutting all metals, without lubrication in a safe and precise way. It features a solid cast iron frame, strong cast aluminum cutting arm, and an adjustable bar stop (500mm). The cutting angle can be adjusted between 0° and 45°.Fitted with an ergonomically designed handle for comfortable, safe handling. Light and portable, it weighs only 17kg, making it suitable for intensive use in workshops and on construction sites.Supplied with a bi-metal blade ideal for precise, burr-free cutting.
Voltage: 240V
Input Power: 750W
No Load Speed: 60/80m/min
Blade Dimensions: 1335 x 13 x 0.65mm
Weight: 17kg
The STANLEY SXBS914E Belt-Disc Sander features a powerful and silent asynchronous induction motor. Equipped with a 150mm sanding disc and a wide 100mm sanding belt, it allows for versatile sanding and polishing. The adjustable sanding belt can be set between 0 and 90 degrees, while the sanding disc area includes an adjustable work table with a protractor for precise angles.With a cast iron base for stability and a dust connection port for a cleaner workspace, this sander is ideal for finishing jagged edges and smoothing surfaces. Perfect for both DIY enthusiasts and professionals.
Powerful 370W induction motor for efficient sanding.
Adjustable sanding belt and disc for versatile applications.
150mm sanding disc and 100mm wide sanding belt included.
Dust connection port for cleaner operation.
Sturdy cast iron base ensures stability during use.
The Stanley SXDP16720E 16mm Drill Press is designed for precision drilling in both metal and wood. With a variable speed range of 420 to 2700 m/min, you can easily select the optimal speed for your specific project. The 60mm spindle stroke allows for deeper drilling, ensuring accuracy and efficiency.This drill press features a 16mm chuck with a transparent safety guard, accommodating drill bits from 3 to 16mm. Its ergonomic, non-slip handle provides comfort and control, making it suitable for both hobbyists and professionals. A must-have addition to any workshop.
Variable Speed: 420-2700 m/min for versatile applications
60mm Chuck Stroke for deeper drilling capabilities
16mm Chuck Capacity for various drill bit sizes
Ergonomic Handle for enhanced comfort and control
Ideal for both metal and wood drilling tasks
The STANLEY SXGB150E Bench Grinder is equipped with a grinding wheel and a steel polishing brush. This essential workshop machine has a powerful, silent induction motor and a range of safety features for maximum user protection.Fitted with transparent spark screens for increased safety. Each spark guard features an embedded magnifying glass. The solid base with anti-vibration supports prevents it from wobbling during operation. It also features tiltable, metal workpiece rests and a cooling tray (located on the base). Suitable for all finishing work: polishing, sanding and roughing.Supplied with one grinding wheel and one steel polishing brush.Specifications:Voltage: 240V.Input Power: 330W.No Load Speed: 2,980/min.Grinding Wheel Size: 150 x 20 x 12.7mm.Polishing Brush Size: 150 x 20 x 16mm.Weight: 10.0kg.
The Makita SP6000J Plunge Saw features a depth stopper for splinter-free cutting. It has a kick-resistant design and comes complete with a MAKPAC connector case. Fitted with a soft start feature and electronic speed control for constant speed under load.Specifications:Input Power: 1,300WNo Load Speed: 2,000-5,200/min.Blade: 165 x 20mm boreDepth of Cut: @90° 55mm, @45° 39mmWeight: 4.2kg1 x Makita SP6000J Plunge Saw 165mm 1300W 240V Version.
The Stanley SXDP13597E 13mm Drill Press is designed for precision drilling in both metal and wood. With variable speed settings ranging from 400 to 2700 m/min, you can easily select the optimal speed for your specific project. The 50mm spindle stroke allows for deeper drilling, ensuring accuracy and control.Equipped with a 13mm chuck and a transparent safety guard, this drill press accommodates drill bits from 1.5 to 13mm, making it versatile for various tasks. The ergonomic, non-slip handle enhances comfort and control, making it suitable for both hobbyists and professionals alike.
Variable Speed: 400-2700 m/min for versatile applications
50mm Chuck Stroke for deeper drilling precision
13mm Chuck Capacity for a wide range of drill bits
Ergonomic Handle for increased comfort and control
Ideal for both hobbyists and professionals
The Evolution EVOMAG42 Magnetic Drill is versatile, accurate and fast, with strong magnetic adhesion (1500kg), the EVOMAG42 is an essential tool when performing heavy-duty industrial and steel fabrication work.The cuts are precise and clean due to an optimised rotation speed (450rpm) and all popular broaching capacities are covered (12-42mm). The innovative adjustable head system means twist drills can be used to full capacity.
Supplied with 1 x 1/2in Chuck and Key
Includes a Coolant Tank System for efficient operation
Comes with 6 x 25mm Annular Cutters for various sizes
Features a Safety Strap and Guard for secure use
Compact design with a weight of only 10.9kg
The Einhell TE-AD 18 Li-Solo Power X-Change Angle Drill is ideal for tightening screws and drilling in tight spaces. With its compact, angled design and rotatable battery holder, the angle drill can easily get into corners and hard-to-reach places such as shallow drawers. The large switch surface means the angle driver can be gripped in a wide variety of ways, and so is comfortable to operate from any position. With a maximum torque of 45Nm and an idle speed of up to 1,100 revolutions per minute, the angle drill delivers plenty of power for screwing and drilling jobs. The transmission is made of robust metal to ensure power is transferred efficiently. Equipped with finely adjustable speed control electronics for optimal control of the speed. Inserting the desired tool accessory into the single-sleeve 10mm quick-action chuck with automatic spindle lock takes no time at all. The integrated LED light ensures optimum visibility, and the angle driver rotates in clockwise and anticlockwise directions so you can both tighten and loosen screws. The device sits comfortably in the hand thanks to its slim, ergonomic design with special Softgrip surfaces.Part of the Power X-Change family. Powered by Lithium-ion rechargeable batteries with a battery management system for a long life.Comes as a Bare Unit - No Battery or Charger supplied.Specifications:Chuck Capacity: 10mm.No Load Speed: 1,100/min.Max. Torque: 45Nm.Weight: 1.22kg.
The Einhell TE-CS 18/150 Li-Solo Power X-Change Circular Saw is compact, lightweight and easy to work with. The cutting depth and tilt angle can be adjusted quickly and easily without any tools. A spindle lock makes it easy to swap sawblades with a 10mm or 16mm bore. High-quality LEDs give you a clear view and a dust vacuum attachment keeps the work area clean. Supplied as a Bare Unit - No Battery or Charger. Specification: No Load Speed: 4,200/min.Max. Cutting Depth: @90 degree 48mm, @45 degree 32mmBlade: Ø150 x 10mm BoreWeight: 2.34kg
The Einhell TE-SV 18 Li-Solo Handstick Vacuum Cleaner provides uninterrupted movement without cables thanks to its interchangeable battery system and fast charging technology. With ECO and BOOST mode, the suction power can be adapted to any situation. It provides thorough cleaning in dark areas thanks to 4x spotlight LEDs. Easy to manourve thanks to it's head joint, which can be moved around two axes and rubberised wheels. Can be used both as a hand-held vacuum cleaner and for floor cleaning as an upright vacuum cleaner. The triple filter system with washable pleated filter and cyclone separator ensure clean exhaust air and efficient suction. Its dust collection container can be emptied easily without a bag at the push of a button. Part of the Power X-Change series, powered by Lithium-ion rechargeable batteries with a battery management system for a long-life. This vacuum cleaner comes as a Bare Unit, NO battery or charger. Supplied with: 1 x Crevice Nozzle with Brush, 1 x Flex Crevice Nozzle and 1 x Wall Bracket for storing the device + accessories. Specifications: Dust Bowl Capacity: 0.6 litres.Weight: 1.05kg.
Einhell Power X-Change Multi-Ah Battery features high-quality Li-ion cells with no memory effect, low self-discharge and high, constant power. This cell technology delivers 100% more power for maximum performance. With Multi-Ah technology: 6Ah for maximum charge level or 4Ah to protect the battery for 3x longer total lifetime. The charge level is precisely indicated as a % on the digital display. PLUS-technology provides increased power for intensive operation. The ABS process-controlled battery management system stands for maximum safety, optimum performance, operating time and lifetime. Covered with a rubber-coated housing that provides increased impact protection and protects against dust, corrosion and mechanical damage. Compatible with all Power X-Change chargers, machines and for twin battery use in demanding 36V power applications.
The DEWALT 18 Volt DCB18 XR Slide Li-Ion Battery Packs are fitted with technology that offers extended run time and optimised power to complete applications quickly. The battery has no memory effect and virtually no self-discharge for maximum productivity and less downtime. They are also fitted with an LED state of charge indicator that help to manage charging times. Compatible with all slide on DEWALT Li-Ion 18 Volt Tools.The DEWALT DCB183 XR Slide Battery Pack has the following specification: Battery Capacity: 2.0Ah.Battery Chemistry: Li-Ion.Voltage: 18 Volt.
The DEWALT DCK2052H2 POWERSTACK Twin Kit, contains the following: 1 x 18V DCD999 XR XRP Combi Drill with FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and can unlock even more power. A foot LED with delay feature, provides improved visibility and flashlight functionality. Chuck Capacity: 1.5-13mm.No Load Speed: 0-500/1,500/2,250/min.Impact Rate: 38,250/bpm.Max. Torque: 67Nm.Max. Drilling Capacity: Metal 15mm, Wood 55mm, Masonry 13mm.Weight: 1.6kg (without battery). 1 x 18V DCF850 XR Brushless Impact Driver comes with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. POWERSTACK batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/2,800/3,250/min.Impact Rate: 3,800/bpm.Max. Torque: 205Nm.Weight: 0.9kg. Also supplied with: 1 x DCB1104 Charger, 2 x 18V POWERSTACK Li-ion Batteries 5.0Ah & 1 x TSTAK Heavy-duty Kitbox.
The Makita DGP180 LXT Grease Gun features two speed modes: slow and auto speed change. Auto speed change mode applies grease while varying the flow rate, automatically matching the resistance of the part being greased. Bulk grease can be directly loadable into the barrel. Fitted with an ergonomically designed handle and soft grip for increased comfort. There is also a lock-on function, ideal for long work periods with reduced fatigue, and a handy LED job light. Supplied as a Bare Unit - No Battery or Charger. Supplied with: 1 x Flexible Hose and 1 x Shoulder Strap. Specification: Max. Operating Pressure: 10,000 psiFlow Rate (Slow/Auto Speed): 145/290ml/min.Grease Capacity: Cartridge 410g, Bulk 455gFlexible Hose Length: 1,200mmWeight: 4.8kg (without battery)
The Makita GDO810C Die Grinder offers a high, constant speed even under load and has a soft start feature. It has a maximum 8mm collet capacity and an internal labyrinth construction that seals that motor and bearings from contamination. The tool is double insulated for increased user protection. Supplied with a 6mm Collet Cone. Specification Input Power: 750WNo Load Speed: 7,000 - 28,000/min.Collet Capacity: 8mmWeight: 1.6kg
The Makita TW004G XGT 40Vmax BL Impact Wrench is an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut is loosened enough. Its ergonomically designed handle features a rubberised soft grip for increased user comfort and reduced fatigue. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. It also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 1/2in Square C Ring.No Load Speed: 0-1,000/1,800/2,600/3,200/min.Impact Rate: 0-1,800/2,600/3,400/4,000/bpm.Max. Torque: 350Nm.Nut Busting Torque: 630Nm.Bolt Capacity: Standard: M10-M20.
The Makita TW004GZ01 XGT 40Vmax BL Impact Wrench is supplied in a MAKPAC as a Bare Unit - No Battery or Charger.
The Makita XGT 40Vmax Li-ion Battery has been built to withstand harsh environmental conditions. It has a robust construction, protected against dust with a splash-proof design and an integrated cooling system for maximum durability. Equipped with an LED indicator which shows the remaining capacity of the battery. The XGT 40Vmax range is equipped with special electronics providing digital communication between tool, battery and charger. This allows the charger to provide the optimal charge to the battery depending on the status of the battery, whilst the tool can respond to the status of the battery by optimising performance to the battery level.
1 x Makita BL4040F XGT 40Vmax Battery 40V 4.0Ah Li-ion.
The Makita DLX2180TJ Brushless Twin Pack, contains the following: 1 x 18 Volt DHP484 Brushless Combi Drill is fitted with a powerful brushless motor, for increased runtime and power. It has an all metal gear construction with aluminium gear housing and 2 mechanical gears. Speed is controlled via the variable speed trigger and features forward/reverse rotation. The top back of the handle is ergonomically contoured and widened to perfectly fit the users hand. No Load Speed: 0-500/0-2,000/min.Blows Per Minute: 0-7,500/0-30,000/bpm.Torque Settings: 21 + drill.Max Torque Soft/Hard: 30/54Nm.Capacity: Wood: 38mm, Masonry: 13mm, Steel: 13mm.Weight: 1.8kg. 1 x 18 Volt DTD153 Brushless Impact Driver is fitted with an energy efficient brushless motor that uses less energy and provides a longer run time. Speed is controlled via the variable speed trigger and features forward/reverse rotation. Fitted with a one touch sliding chuck for easy bit installation and removal. Its ergonomically designed soft grip handle increases comfort and reduces fatigue. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-3,400/min.Impact Rate: 0-3,600/bpm.Max Torque: 170Nm.Capacity: Machine Screw: M4-M8, Standard Bolt: M5-M16, High Tensile Bolt: M5-M12Coarse Thread Length Capacity: 22-125mm. 1 x 14.4-18 Volt DC18RC Compact Li-ion Charger has a built-in cooling fan system that blows cool air into the battery, which keeps the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. Has 3 active charging colours to help identify when the battery is charged, and to what level. Also supplied with 2 x 18 Volt 5.0Ah Li-ion Batteries and 1 x Type 3 MAKPAC Connector Case.
The Makita DJR187RTE Brushless LXT Reciprocating Saw is supplied with: 2 x 18V 5.0Ah Li-Ion Batteries1 x DC18RC Fast Charger2 x 152mm Reciprocating Saw Blades (6TPI and 18TPI)1 x Carry Case
The Makita DGA467Z Brushless LXT Angle Grinder has an electronic current limiter for overload protection, soft start and anti-restart function for ease of use. For added safety there is also an electric brake. The ergonomically designed handle features a soft grip and safety paddle control switch. The speed is easily controlled via the variable speed control dial. Active Feedback Sensing Technology (AFT): shuts down the tool to protect the user if the rotation speed suddenly slows down. Automatic Torque Drive Technology (ATDT): automatically changes the cutting speed according to load condition for optimum operation. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 3,000-8,500/min.Wheel Size: 115 x 22.23mm BoreMax Wheel Thickness: 7.2mmWeight: 3.1kg
