The Senco SFW05-C Pneumatic Semi Pro Fine Wire Stapler delivers excellent performance for a variety of fine wire stapling applications. With a robust all-metal cylinder and ergonomic design , this tool works all day, every day and won't snag or scuff fabric, giving you increased productivity with less downtime. It drives staples with a crown width of 9.5mm and in lengths from 6mm-16mm. Ideal for upholstery, furniture assembly, cabinets, vinyl, interior trim and beading. Comes with a 1 Year Warranty. Requires a 1/4in tailpiece. Specification: Magazine Capacity: 100Fires: Staples: 6-16mmOperating Pressure : 5.2-6.9 barAir Consumption : 27 l/min.Actuation: Trigger FireDimensions (LxWxH): 229 x 45 x 163mmWeight: 0.9kg
The DEWALT DCR029 Compact Bluetooth® Radio is a compact and robust DAB(+) AM/FM jobsite radio and can be powered by mains or by DEWALT 12-18V XR Li-ion batteries, including XR FlexVolt batteries. It also streams audio from any Bluetooth® enabled device. The 30W speakers and customisable equalizer provide excellent sound quality. Jobsite ready, with an integrated roll cage for increased protection and handle for easy transportation. There's also a USB charging port and auxiliary input to allow wired connection of other devices. Bare Unit - No Battery or Charger supplied. Specification: Radio Range: DAB(+) AM/FMInput Power: Battery 12-54V Li-ion, DC 230/240VDimensions: 300 x 220 x 170mmWeight: 3.6kg
The DEWALT DCF892 XR Impact Wrench has an efficient brushless motor and 1/2in square drive plus detent pin allowing for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification: Bit Holder: 1/2in Detent PinNo Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpmMax. Torque: 812NmBreakaway Torque: 1152NmWeight: 1.6kg (without battery)The DEWALT DCF892N XR Brushless High Torque 1/2in Impact Wrench is supplied as a Bare Unit - No Battery or Charger.
The DEWALT DCF921 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with hog ring for quick socket changes. A hole in the anvil enables the securing of sockets with a retaining pin/rubber O-ring, making it the ideal impact wrench for scaffolders. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Comes with a 1 Year Warranty. Specifications: Bit Holder: 1/2in Hog Ring.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).The DEWALT DCF921D2T XR Brushless 1/2in Impact Wrench is supplied with: 2 x 18V 2.0Ah Li-ion Batteries1 x Charger1 x TSTAK Kitbox
The DEWALT DWE4206 115mm Mini Grinder is fitted with a no-volt release switch that prevents the unit from starting unintentionally when locked on. The switch must be consciously reset before power is delivered. Soft start reduces movement of the tool on start up increasing user control and there is a high efficiency motor that improves performance, even in demanding applications. The dust ejection system removes the majority of debris from the air which passes over the motor, preventing abrasion and tracking. It has a new guard design that allows guard fitment, adjustment or removal without the use of tools, for increased flexibility. A side positioned spindle lock gives greater protection to the button when using in confined spaces. The grinder as pop off brushes that protect the armature from damage at the end of brush life resulting in greater motor durability. It has a small girth that allows comfortable gripping and it has a low profile gear case, that allows access in confined areas. There is also an anti-vibration side handle to improve user comfort, anti lock flange that prevents flanges from permanently locking up and locking the disc on and fully leaded stator windings for increased motor durability. Specification Input Power: 1,010W. No Load Speed: 11,000/min.Max. Disc Diameter: 115mm. Spindle: M14. Length: 285mm.Weight: 2.1kg.DEWALT DWE4206K-GB 115mm Mini Grinder With Kit box 1010 Watt 240 Volt Version
The DEWALT DCV5801H Wet Dry Vacuum Replacement Filter features a H.E.P.A. filter that traps 99.97% of dust, as small as 0.3 microns. It wet and dry capabilities means change over time has been eliminated. The filter is washable and reusable, just rinse clean with water. Fits the DCV582 XR Li-Ion Vacuum.
The DEWALT DCV586M XR FlexVolt Dust Extractor is M-Class compliant, <0.1% dust escape through filter, making it suitable for use on construction sites. Fitted with a brushless motor that provides powerful and constant suction power, even with the finest concrete and wood dust. Innovative dual filter cleaning system maintains performance during tough construction applications. The filter is automatically cleaned every 30 seconds, reducing filter clogging and delivering constant air flow. An audible alarm alerts user if a drop in performance occurs. The extractor features a key fob remote which enables wireless activation of the unit away from the switch for ease of use, saving time and effort. The TSTAK™ compatibility enables ease of use, enhanced mobility and flexible storage. Wet and dry capacity for maximum clean up flexibility. DCV586MT2: 2 x 18/54V 6.0/2.0Ah Li-ion BatteriesDCV586MN: Bare Unit, No Battery or Charger Specification: Voltage: 18/54VCapacity Wet/Dry: 7.5/11 LitreMax. Air Flow: 24.7L/sec.Hose Nozzle Outside Diameter: 32mmThe DEWALT DCV586MT2 XR FlexVolt Dust Extractor is supplied with: 2 x 18/54V 6.0/2.0Ah Li-ion Batteries1 x DCB118 Fast Charger1 x Extraction Hose 2.4m x 32mm1 x AirLock Adaptor 3mm1 x Stepped Rubber AirLock Adaptor 1 x Key Fob1 x Strap1 x Fleece Dust Bag DEWALT XR FlexVolt batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 volt products and offering increased run time.
The DEWALT Replacement DCV5861 M-Class Filters for use with the DEWALT DCV586M XR FlexVolt Dust Extractor. The filters can be used both within wet and dry applications. The pack contains 2 replacement filters. M-Class certified to meet EU legislation, HEPA certified.
The DeWALT DCF860N XR Impact Driver has a high performance brushless motor which extends tool life and allows for a much shorter design. It also features a 3 mode switch for enhanced control. The super bright 9 LED ring delivers 82 lumens and features a flashlight mode, provides 20 minutes of bright continuous light.Comes as a Bare Unit, NO battery or charger supplied.Specifications:No Load Speed: 0-1,800/0-2,800/0-3,800/min.Impact Rate: 0-4,400/bpm.Max. Torque: 282Nm.Weight: 1.09kg.
The DeWALT DCF870N XR Hydraulic Impact Driver has a powerful brushless motor delivering high performance, extends tool life and allows for a much shorter design. The quiet hydraulic mechanism delivers high speed application with reduced impact noise. It also features a 3 mode switch for enhanced control. The super bright 9 LED ring delivers 82 lumens and features a flashlight mode, providing 20 minutes of bright continuous light.Comes as a Bare Unit, NO battery or charger supplied.Specifications:No Load Speed: 0-1,100/0-3,000/min.Impact Rate: 0-4,200/bpm.Weight: 1.32kg.
The DEWALT DCF923 XR Impact Wrench has an efficient brushless motor and 3/8in square drive with hog ring for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Supplied as a Bare Unit - No Battery or Charger. Specification: Bit Holder: 3/8in Hog RingNo Load Speed: 2,500/min.Impact Rate: 3,600/bpmMax. Fastening Torque: 406NmNut Busting Torque: 610NmWeight: 1.1kg (without battery)
The Panasonic EYC242LJ2G31 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder: 1/2in Square Drive with Ball DetentNo Load Speed: 0-1,000/0-1,500/0-2,500/min.Impact Rate: 0-1,900/0-2,900/0-3,600/bpmMax. Torque: 280NmTensile Bolt Capacity: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.
Bosch GBH 5-40 D SDS-Max Professional Rotary Hammer features robust metal components and an optimised lubrication system for increased durability. Its lightweight and compact design makes it ideal for work in hard-to-reach places. The strong motor enables the delivery of 8.5 J of impact energy for a fast drilling progress and high material removal rate. This tool is intended for drilling up to 40mm in diameter as well as light chiselling work in concrete and stone. It is compatible with various dust attachments. The GBH 5-40 D Professional also features a Rotation Control Clutch and Speed Selection. Supplied with: 1 x Auxiliary Handle, 1 x Grease Tube, 1 x Machine Cloth and 1 x Carrying Case. Specifications: Tool Holder: SDS-Max.Input Power: 1,100W.Impact Rate: 1,500-2,900/bpm.Impact Energy: 8.5 Joules.Drilling Diameter: Concrete, Hammer Drill Bits 12-40mm, Opt. Appl. Range Concrete, Hammer Drill Bits 18-32mm, Concrete, Breakthrough Drill Bits45-55mm, Concrete with Core Cutters40-90mm.Weight: 6.8kg.
The DEWALT DCW220NT XR 18V Belt Sander has a brushless motor for extended durability, efficiency and power. It also has a high no load speed, which is variable to provide ultimate speed and application control.The sander features a direct AIRLOCK dust port and wireless tool control to ensure a cleaner and safer jobsite. WTC™ allows for remote switching on of the dust extractor when the sander is started (requires compatible DEWALT dust extractor). A quick-release belt change system allows sanding belts to be changed effortlessly. Class leading DEWALT ergonomics ensure maximised comfort and safety. Supplied in a T-STAK VI Kit Box. Includes:Dust Bag.Rotating Dust Port.Sanding Belt, 80 Grit. Bare Unit, No Battery or Charger supplied. Specifications: Belt Speed: 320m/min.Belt Size: 75 x 533mm.Weight: 3.0kg.
The Bosch GWS 9-115 S Angle Grinder is fitted with a powerful motor and variable speed selection for increased control when working on different materials. With overload capacity for increased safety. The small grip diameter and ergonomic design make it comfortable and easy to handle. Specifications: Input Power: 900W.No Load Speed: 2,800-11,000/min.Disc Diameter: 115mm.Spindle Thread: M14.Weight: 1.9kg.
The Evolution R230RCP Multi-Material Reciprocating Saw has been designed to cut a wide range of materials from green wood to metal. Comes fitted with an ergonomic, soft grip, 180û rotating handle for maximum control and versatility without having to adjust the blade. Fully tool-less blade changes and adjustments for quick and easy use. The LED light improves visibility and precision for accurate work in low-light conditions, whilst the 3m cable length gives freedom within the workspace. Supplied with 4 single-purpose blades for the dedicated cutting of thin steel, green wood and general wood, along with a multi-material blade to increase productivity, allowing you to cut through a range of materials including plastic, copper, wood and metal. Specification: Input Power: 850WNo Load Speed: 0-2,400/min.Stroke Length: 28mmRear Handle Rotation: 180°Weight: 3.2kg
The Metabo MFE40 FE Wall Chaser is ideal for electric installations, to lay cables and empty pipes under plaster with cutting depths up to 40mm. Fitted with a powerful Marathon motor for increased performance and patented dust protection for long service life. Tacho-Constamatic (TC)-Full Wave Electronics provide fast work progress by means of constant speed under load. With electronic soft start and restart protection for safe working. LED signal informs about overload or active restart protection. The Metabo S-automatic safety clutch provides mechanical decoupling of the drive for safe working should the disc stop unexpectedly. Fitted with a robust aluminium die-cast hood and optimal handle position for comfortable guiding of the machine. Pushing cut for optimal view of the marking line. The channel width and cutting depth can be set . Specification: Input Power: 240V 1,900W, 110V 1,700WNo Load Speed: 5,000/min.Cutting Depth: 10-40mmGroove Widths: 9, 15.5, 22, 28.5, 35mmTorque: 6NmDisc Diameter: 125mmWeight: 4.6kgThis Metabo MFE40 FE 125mm Wall Chaser 1900W 240V is supplied with: 2 x Diamond Cutting Discs1 x Set of Spacer Rings1 x Flange Nut1 x Face Pin Wrench1 x Chase Chisel1 x Plastic Carry Case
The Einhell TE-MS 18/210 Li Solo Mitre Saw is a member of the Power X-Change family, it is a versatile tool for use in the work shed, garage and hobby room. Quickly adjustable settings make it possible to perform work on materials such as wood, panels, all sorts of plastic, or parquet flooring with almost effortless ease. The turntable has an exact angle adjustment facility for angular cuts. The saw head can be tilted to the left for exact mitre cuts. X-Tend workpiece supports enable the settings to be adjusted with just one hand and without the need for any tools. For repeat cutting there is an integrated limit stop. The high-quality carbide-tipped precision saw blade was developed specially for cordless saws. The sawdust bag or the chip extraction system (extractor connection Ø36mm) help keep the workplace clean and tidy and prevent the accumulation of dust in the air. The compact and low-weight design along with the carry handle make it easy to transport. Other features include: an integrated clamp, cutting line laser and an LED work light. Bare Unit, No Battery or Charger Supplied. Recommendation for best results: 2.6Ah Plus battery or higher. Specification: No Load Speed: 3,000/minBlade: 210 x 30mm BoreMitre Cut: 45° - 0°Swivelling Range: 47° - 47°Cutting Capacity: 90° x 90°: 120 x 60mm, 90° x 45°: 83 x 60mm, 45° x 90°: 120 x 34mm, 45° x 45°: 80 x 34mmSuction Adaptor: Ø36mmWeight: 7kg
The Makita DBO480 LXT Finishing Sander is equipped with a 2-speed electronic speed control system and a tool-less paper clamp for quick working. A redesigned balancer reduces the tool vibration in loaded operation.This Makita sander is ergonomically designed to provide the best possible grip for comfortable handling, and dust is kept to a minimum, in two ways, either thanks to the rear mounted bag or the dust port can be used to attach a dust extractor. The perfect tool for carpenters, fitters, joiners and DIY enthusiasts. Comes as a Bare Unit, NO battery or charger supplied. Supplied with: 1 x Triangle Plate, 1 x Dust Bag, 1 x Abrasive Paper Set, 1 x Dust Bag Nozzle, 1 x Dust Nozzle and 1 x Punch Plate. Specifications: Oscillating Speed: 28,000/22,000/min.Orbits per Minute: 14,000/11,000/opm.Orbit Diameter: 1.5mm.Paper Fastening: Hook & Loop or Clamp.Pad Size: 112 x 102mm.Paper Size: 114 x 102mm.Weight: 1.4kg.
The Makita DDF083 Drill Driver has a brushless motor for increased power and run time. Whilst the variable speed trigger and 2 mechanical gears provide increased control. It offers both forward and reverse rotation. The body is fitted with an ergonomically designed comfort grip for increased user comfort. For added user safety there is an electric brake. Other features include a belt clip and LED job light. Comes as a Bare Unit, No Battery or Charger. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-500/0-1,700/min.Torque Settings: 20 + DrillMax. Torque: 23/40NmCapacity: Wood 36mm, Steel 13mmWeight: 1.1kg
Makita DUB187 LXT BL Blower Vacuum with variable speed control by trigger plus Cruise control. Easy to operate with a single action lever for blower/vacuum mode selection. There is also a lock-on button for continuous operation. Its lightweight design incorporates two casters for easy manoeuvring. The soft grip provides increased comfort on the job.A battery protection system automatically shuts off power when the battery level is low. Comes as a Bare Unit, NO battery or charger supplied. Specifications: No Load Speed: 9,000-13,500/min.Max. Air Velocity: 64 m/s.Air Volume: 4.2 m³/min.Max. Sealed Suction: 33 mbar.Weight: 3.3kg.
The Makita DPJ180 LXT Biscuit Jointer has a compact, lightweight design with an easy-to-grip slim motor housing. Fitted with an angle adjustable fence that has positive stops at 0º, 45º and 90º. There are also 6 preset cutting depths. The anti-restart function and electronic current limiter, both with a warning lamp, provide additional safety. A shaft lock provides easy blade change. The dust nozzle is rotatable for easy connection to dust extraction. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 6,500/min.Blade: Diameter 100mm, Thickness 4mmHole Diameter: 22mmWeight 2.8kg
The DEWALT DCD805 XR Brushless G3 Combi has been engineered to give the greatest performance on the toughest jobsites, the 2 speed and 15 torque settings give the ultimate control over drilling and fastening applications. Its ultra-compact, lightweight design allows use in confined spaces, and fitted with an ergonomic, overmould rubber grip improving the user's comfort. The enhanced pivoting LED positioned on the foot offers greater visibility in dark, and confined spaces. POWERSTACK batteries deliver 50% more power* with a 25% smaller** footprint and work with all DEWALT 18V XR tools. * Regarding 50% more power: vs DCB183 battery, not in application.** Regarding 25% smaller pack and a more compact footprint: vs DCB183 battery. Specification: Chuck: 13mm.No Load Speed: 0-650/2,000/min.Impact Rate: 34,000/bpm.Max. Torque: 90Nm.Capacity: Steel 13mm, Masonry 13mm, Wood 55mm.The DEWALT DCD805H2T XR BL G3 Combi is supplied with: 2 x 18V 5.0Ah POWERSTACK Li-ion Batteries1 x POWERSTACK Compact Charger1 x TSTAK Carry Case
The DEWALT DCS579X2 XR FlexVolt Circular Saw is supplied with the following: 2 x 54V 9.0Ah Li-ion Batteries1 x 190mm x 24T TCT Blade1 x Rip Fence1 x Dust Extraction Port (Airlock)1 x 18-54V DCB118 XR FlexVolt Multi-Voltage Fast Charger1 x TSTAK™ VI Case The DEWALT DCS579 XR FlexVolt Circular Saw is ideal for general-purpose ripping, crosscutting and bevelling wood and other construction materials. Its brushless motor provides increased power, extended run time, reliability and durability. With variable adjustment of the bevel angle to 57° and a scale for precise cutting depth setting to 61mm (57mm when used with Guide Rail). The design offers optimum balance for safe, fatigue-free operation. With a stable block construction for low vibration running and long service life. Fitted with an additional handle for safe two-handed work. Direct Airlock Compatibility allows quick, secure connection to the extraction hose, whilst a dust blower keeps the cut-line free from dust and debris. There is also an LED work light for improved cut-line visibility. Guide rail compatible for quick and easy use with the DEWALT guide rail system. Supplied with a durable, long-life 190mm Tungsten Carbide tipped (TCT) 24T blade. Specification: No Load Speed: 5,800/min.Max. Cutting Depth: without Guide Rails: @90° 61mm, @45° 49mm; with Guide Rails: @90° 57mmBlade: 190 x 30mm BoreWeight: 3.7kg
The Bosch GAL 18V6-80 Professional 6 Port Fast Chargeroffers continuous charging on the job or overnight in two cycles. The first cycle charges up to six batteries sequentially up to 80%. Cycle two then completes the process, charging all batteries to 100%. Thanks to an 8A charging current, ProCORE18V 8.0Ah batteries load up to 80% in just 42 minutes. Charge-level indicators with 5 LEDs on each charging interface display precise charging progress. With a Priority Start Button for each interface, the cycle can be interrupted to start charging the selected battery immediately. Fixing the multi-bay charger to an L-BOXX avoids potentially harmful movements when transporting. The charger's handle features pegs allowing its cable to be wound neatly in place for storage and safe transportation. Compatible with all Bosch Professional 18V batteries, including ProCORE18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance.
The Bosch GSB 16 RE Professional Impact Drill has a powerful motor for fast work process. Its sturdy metal gear housing provides a long lifetime. The single-sleeve keyless chuck with Auto-Lock allows for swift tool changes with just one hand, enhancing efficiency and convenience. Supplied with: 1 x Keyless Chuck 13mm, 1 x Depth Stop 210mm, 1 x Auxiliary Handle and 1 x Carrying Case. Specifications: Input Power: 750W.Chuck Capacity: 13mm.Drill Spindle Connecting Thread: 1/2in-20 UNF.No Load Speed: 0-2,800/min.Impact Rate: 0-47,600/bpm.Torque: 2.3Nm.Spindle Collar Diameter:43mm.Drilling Diameter: Wood30mm,Steel13mm,Masonry:18mm.Weight: 2.2kg.
The Einhell TP-PS 18/165 Li BL PROFESSIONAL Plunge Cut Saw is a true all-rounder in the workshop. Whether wood, panels or plastics: With the plunge function, you can directly enter the workpiece from above. Powered by an Einhell Brushless motor. This brushless motor offers more power and a longer running time than conventional carbon brush motors. Once you register online, the brushless motor has a 10-year guarantee. Safety at work is ensured by soft start, engine brake and restart protection.The light and compact plunge cut saw is equipped with a high-quality aluminium saw table. When combined with the parallel stop, this allows for precise, straight cuts. In addition, the cutting area can be viewed via the viewing window and the cutting line indicator. A marker indicates the maximum immersion range. The spindle lock makes it particularly easy to change the saw blade.Equipped with an ergonomic main handle and front handle. The softgrip surfaces also ensure fatigue-free working. Cutting depth and tilt angle can be adjusted easily and without tools. The high-quality carbide-tipped saw blade (Ø 165mm) works powerfully through materials up to a cutting depth of up to 56mm at 90° (without guide rail). Clean cuts are also guaranteed in the area of use close to the edge. An integrated swiveling suction connection keeps your workspace clean at all times. In addition, the cordless plunge saw is compatible with the Einhell guide rail system. Delivery includes one blade for wood. No Battery or Charger supplied.Part of the Power X-Change family. Powered by Lithium-ion rechargeable batteries with a battery management system for a long life.Specifications:No Load Speed: 5,000/min.Max. Cutting Depth @90º 56mm, @45° 42mmBlade: 165mm, 20mm BoreBevel Capacity: 57°Suction Connection Diameter: 36mmWeight: 4.23kg
The Einhell TE-CF 18 Li-Solo Power X-Change Coffee Maker lets you enjoy fresh coffee anytime, anywhere. Whether on the construction site, in the great outdoors or away on a camping trip – wherever you don't have a socket to hand, this coffee maker comes into its own.It combines two ways of enjoying coffee in one: classic filter coffee and practical coffee pads. With the ground coffee container, tried and tested filter coffee can be brewed in a very short time. The coffee pad brewing insert is compatible with all commercially available coffee pads. Brewing time is about 5 minutes from when the device is switched on. During this time, the machine heats up to a maximum temperature of 80 °C and brews the coffee. The removable water tank holds 240ml and is designed for a large cup of coffee. Easy to transport thanks to the integrated carrying handle. Rubber feet ensure a non-slip and stable position wherever it is set up.Delivery includes a dust-proof, stainless-steel coffee cup with a capacity of 240ml and a matching lid. The cup is 90mm tall and fits perfectly into the coffee maker. A cup holder prevents the coffee mug from falling out when moving the machine. It also comes with a measuring spoon, a ground coffee container with filter and a container for commercially available coffee pads.The coffee maker is easy to transport with the integrated carrying handle. Rubber feet ensure a non-slip and stable position wherever it is set up. Comes as a Bare Unit - No Battery or Charger supplied.Specifications:Brewing Time: 5 min.Max. Cup Height: 90mm.Max. Coffee Temperature: 80°C.Water Container Volume: 240ml.Weight: 1.17kg.
The DEWALT DCS570 XR Brushless Circular Saw is ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power on job site cutting tasks and joinery materials. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. DCS570P2: 2 x 18 Volt 5.0Ah Li-ion BatteriesDCS570N: Bare Unit, No Battery or Charger Specification: No Load Speed: 5,500/minMax Cutting Depth @90º: 64mmBlade: 184mm, 16mm BoreBevel Capacity: 57°The DEWALT DCS570N XR Brushless 184mm Circular Saw is supplied as a bare unit, no battery or charger.
The Black & Decker BEG010A5 Heritage Grinder has been designed to provide the perfect balance between power, weight and size. The motor delivers high-performance, ideal for completing a range of grinding and cutting tasks. For added safety there is a no-volt release switch that prevents the unit from starting unintentionally when locked on. The 3-position side handle offers greater comfort and control. Applications include cutting metal pipes, removing rust from metal work, removing excess weld, mortar raking from between brickwork and general renovation tasks. Supplied with: 4 x Metal Cutting Discs, 1 x Stone Cutting Disc, 1 x Cutting/Grinding Guard & 1 x Side Handle. Specification: Input Power: 710WNo Load Speed: 1,2000/min.Disc Diameter: 115mmSpindle: M14Weight: 1.7kg
The DEWALT 18 Volt DCB18 XR Slide Li-Ion Battery Packs are fitted with technology that offers extended run time and optimised power to complete applications quickly. The battery has no memory effect and virtually no self-discharge for maximum productivity and less downtime. They are also fitted with an LED state of charge indicator that help to manage charging times. Compatible with all slide on DEWALT Li-Ion 18 Volt Tools.The DEWALT DCB182 XR Slide Li-Ion Battery Pack offers extended runtime and optimised power to complete applications quickly. The lightweight design provides the user with upgraded 4Ah Power without increasing the size or weight. The battery has no memory effect and virtually no self-discharge, ensuring maximum productivity and less downtime. It is fitted with a LED State of Charge Indicator that helps to manage charging times. The battery pack has excellent electrical characteristics and is compatible with all DEWALT 18 Volt tools that except slide-on type batteries.
The Bosch GSR 12V-35 HX Professional Screwdriver offers the perfect balance between compactness, productivity and performance. Its compact design easily reaches into tight and narrow spaces. With a rotation speed of 1,750 rpm, it is the fastest 2-gear 12V tool of its kind, enabling smooth and efficient working with fast results. Exchanging bits is easy thanks to the convenient lockable 1/4in bit interface. Suitable for screwdriving into a wide range of materials. Compatible with all Bosch Professional 12V and 10.8V batteries and chargers. Specifications: Bit Holder: 1/4in with internal hexagon shank.No Load Speed: 0-460/0-1,750/min.Max. Torque (Soft/Hard): 20/35Nm.Torque Settings: 201.Max. Screw Diameter: 8mm.Max. Drilling Diameter: Wood 32mm, Steel 10mm.Length: 126mm.Height: 162mm.Weight: 0.57kg excl. battery.This Bosch GSR 12V-35 HX Professional Screwdriver is supplied with: 2 x 12V 3.0Ah Li-ion Batteries1 x Belt Clip.1 x Bit Holder.1 x Quick Charger GAL 12V-40 Professional.1 x 1/2 L-BOXX inlay for tool and charger.1/2 L-BOXX inlay for accessories.1 x L-BOXX 102.
The Evolution R255TBL Portable Table Saw is designed for both DIY enthusiasts and professionals. With a powerful 1,650W motor and advanced features, it ensures precision and safety in every cut.
Powerful 1,650W Motor: Ensures efficient cutting through various materials.
Quick Release Riving Knife: Offers enhanced safety and easy adjustments.
Integrated Mitre Sled: Compatible with third-party accessories for added versatility.
Lightweight and Portable: Easy to transport with a folding stand and carry handles.
Improved Dust Extraction: Keeps your workspace clean and safe during use.
