MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bits offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to the special wax filled core which melts, lubricates and cools when drilling. For use on high speed corded drills. Suitable for dry cutting.
1 x MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bit 10mm
IRWIN Impact Pro Performance Pozidriv Screwdriver Bits have been engineered for maximum durability and turning force when used in extreme applications. The full-fit head eliminates wobble and screw head roundings. With a contoured area, so the bit tip flexes with the torque of the impact driver. Flex optimised to transfer maximum torque through the screw and maximise life.Pack of 2 IRWIN Impact Pro Performance Screwdriver Bits PZ1 25mm
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fine Cross Cut.Blade Diameter: 235mm.Bore: 35mm.Teeth: 40.Bush: 30, 25 & 16mm.Rake: POS.
The BlueSpot Tools 3 Piece SDS-plus Chisel Set has been designed for SDS-plus drills with a roto stop function. They have been heat treated for increased strength and durability. Ideal for chasing out, cleaning bricks or breaking. Contents:2 x Flat Chisels : 20mm & 40mm.1 x Point Chisel.
The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.The HSS Drill Bits in this seven piece set are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Contents. 1.6 mm (1/16in) Drill.2.4 mm (3/32in) Drill.3.2 mm (1/8in) Drill.4.0 mm (5/32in) Drill.4.8 mm (3/16in) Drill.5.6 mm (7/32in) Drill.6.3 mm (1/4in) Drill.With collets.
Irwin Pozi insert screwdriver bits engineered for use in hand-driving applications or with power tools, designed for use in insert holder with C-clip for retaining ring notch Compact and versatile with a 1/4 inch hex body and made from high grade S2 steel.1/4 inch HexPack of 10 Pozidriv PZ2 x 25mm long.
The Irwin Phillips Power bits are specially designed for the higher torque requirements of power tools. They are designed to provide more clearance between the power tool and the fastener.The Irwin IRW10504366 Power Screwdriver Bits come in the following:Phillips PH1 1/4 inch Hex 90mm long.
Compressed composite wood biscuits for joining. The Faithfull wood biscuits are available in 3 sizes.Also available is a box of 375 assorted biscuits (sizes 0, 10, and 20) which contains a glue bottle and spreader.The Faithfull FAIDOWBIS0 wood biscuits come in a tub of 150, size no. 0. Dimensions: 47mm x 15mm
The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailer, ensuring fewer jamming or fitment issues. DEWALT nails are made from inspected high quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining.These DEWALT DNBA1650GZ 16 Gauge 20° Finish Nails have the following specification: Length: 50mm.Type: 20° Angled Nails.Finish: Galvanised.Gauge: 1.6 (16GA).Box Quantity: 2500.
DEWALT Wet Diamond Core Bits are made from high-grade steel to withstand the toughest drilling applications. The diamond turbo segments feature a serrated design to improve cooling and debris removal. Laser welded segments prevent segment breakouts during dry drilling.Suitable for a wide range of materials and drilling speeds.
1 x DEWALT DCDW104 Wet Diamond Core Bit 102mm
MEXCO Professional Crown Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss. Suitable for wet cutting.
1 x MEXCO Wet Core Drill (Crown Segment) 30mm
The DEWALT Black Gold HSS Drill Bits are made with a tapered web design for extreme durability. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. While the bits also incorporate a 3-flats shank to reduce spin-out in the chuck. Suitable for drilling in plastic, wood, and metal. 1 x DEWALT BLACK GOLD HSS Drill Bit 8.0mm.
The Makita B-33386 Specialized for Aluminium Cutting Blade has the following specifications: Blade Diameter: 260mm.Bore: 30mm.Kerf: 2.8mm.Rake: 0º.Thickness: 2.2mm.Tooth Count: 80.
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainType: 220-14mTo suit: 230 mm Angle Grinders.Thread: M14 x 2. Abrasive Disc Size 230 mm x 22 mm (9in). Machine Fitted :-AEG, Black and Decker, Bosch, Casals, Clarke, ELU, Fein, Felisatti, Flex, Hitachi, Holzher, Kress, Makita, Manson, Matco, Metabo, Perles, Ryobi, Stayer, Superstork, Teksan. Pin Spanner - Red
The Starrett BU232-5 Metal Cutting Jigsaw Blades with Unified Shank™. These blades will fit in virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products. Supplied in a pack of 5. Specification Length: 50mm.Width: 7.5mm.Thickness: 1mm.TPI: 32.Tooth: Regular.Set: Wavy. Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.
Blue Spot Sanding Flap Discs are made from aluminium oxide and are suitable for most angle grinders. Diameter: 115mm.Bore: 22.2mm.Maximum speed: 80m/s.Grade: 60 Grit.
The Wiha BitBuddy TY Bit Set 7 Piece allows you to position bits directly in the machine and return them to the holder easily. The pioneering arrangement of bits in the holder, and the lasered profile size on the bit base, ensure it is extremely simple to select the right size when removing the bit from the holder.Universal in its use, the multitalented TY bit is suitable for all types of screws (T-shaped and Y-shaped). The ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers, guaranteeing a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy to find, even in the dark by using an UV light, thanks to its fluorescent coating. This reduces the number of bits which are lost and saves on the expense of acquiring new ones.Bits conform to DIN 3126, ISO 1173, Style E6,3. This 7 Piece Set contains the following: 1 x 49mm Phillips TY-Bit PH2. 3 x 49mm Pozidriv TY-Bits: PZ1, PZ2 & PZ3. 3 x 49mm TORX TY-Bits: T15, T20 & T25.
The Wiha Angle Drill Driver comes with magnetic bit holder. Suitable for bits DIN 3126, ISO 1173, form C6.3 and E6.3. Increases your efficiency, offers unlimited access to hard-to-reach screws thanks to the 105 degree angled tool head. The variably settable stabiliser arm increases user safety.Drive: DIN 3126, ISO 1173, Style C6,3.
GYS Rutilo-basic Electrodes have a very low carbon content, making them ideal for welding austenitic stainless steels with and without molybdenum (316, 316L, 316 Ti / Nb). They are resistant to chemical attacks and corrosion saline.Applications: Petrochemical, chemical, maritime industries, pipes and tanks.Classification: EN 1600 / ISO 3581-A: E 19 12 3L R32, AWS A 5.4: E 316 L-17.
These GYS Stainless Steel Electrodes 316L have the following specification:Electrode Diameter: 2.0mm.Thickness: 1.5-3mm.Welding Current: 30-60.Pack Qty.: 12.
The DEWALT SDS Max steel points have toughened steel which ensures tough bits. They also features micro-processor controlled heat treatment for consistently tough, long life chisels and have a sharp pointed end.1 x DEWALT SDS Max Steel Point 300mm
BlueSpot 20 piece cleaning and polishing set comprising the following: 3 x 1in Polishing wheels.1 x Polishing compound.1 x Felt polishing wheel with shank.3 x Nylon brushes: 7/8in, 1/2in, 1/8in nylon brush.1 x 7/8in Steel brush.2 x Mandrels.2 x 7/8in Emery polishing wheels.1 x Felt polishing tip.6 x 1/2in Felt polishing wheels.
Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.Outside Diameter:- 5/8inInside Diameter:- 1/4inThickness:- 11/64in
The Faithfull Vitrified grinding wheels are suitable for use on most types of bench grinder. White wheels are ideal for the general purpose grinding of ferrous metals but they are particularly suited for the sharpening of cutting tools such as chisels and plane irons. These wheels help keep your tools cooler to avoid overheating and weakening the cutting edge. Supplied with bore reducing bushes and will fit bench grindersThe Faithfull FAIGW20025WG is a 200mm x 25mm vitrified grinding wheel suitable for use on most types of bench grinders. The general purpose grinding wheel can also be used for normal grinding of ferrous metals.The Faithfull FAIGW20025WG is supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:31.75mm19.05mm15.88mm12.77mm
DEWALT Extreme Tri-Flute Spade Bits with 3 cutting edges for up to 6x faster cutting, combined with a tri-flute for optimum chip removal and less binding. There are 3 cutting spurs for cleaner and faster holes, the spurs also extend drilling life. Its full screw tip allows the bit to self-feed, for ease of use and pull through.Fitted with a quick-change shank, fits standard quick-change extensions and 1/4in hex bit adaptors. For use with corded and cordless drills. Suitable for drilling holes in wood up to 100mm deep.
1 x DEWALT Extreme Tri-Flute Spade Bit 22 x 152mm.
Flexipads HIGH CUT Liquid Shine quickly and easily removes marks from P1500 sanding papers and heavy oxidation to create a high gloss finish. It is free of silicone, wax and glaze and removes problems rather than hides them. HIGH CUT Liquid Shine is designed for all types of paints and should be used on fresh or fully cured paints. It can be used with foam and wool pads and works at low speed, minimising the risk of burning the paint. It does not require water and will not mark plastics. HIGH CUT Liquid Shine is free of silicone for better health and safety and is biodegradable. Size: 500ml.
The Irwin Construction Table & Mitre Circular Saw Blade with welded carbide teeth for a stronger tooth bond and longer life. The ultra compact carbide is up to 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents and a fully hardened plate that runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods.The IRWIN Construction Mitre Circular Saw Blade has the following specifications: Blade Diameter: 216mm.Bore: 30mm.Teeth: 60.Kerf Thickness: 2.0mm.Tooth Config: ATB/Neg.Machine: Mitre.
Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held or table work.This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm(C) Cutting Length: 9.5mmShank: 1/4in
Keyless chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck can be operated by hand for fast bit changes. The all steel construction provides a long working life making this chuck ideal for use on professional hammer drills. The chuck also features a non-slip locking system for impact drilling and holesaw applications1/2in x 20 UNF thread.Heavy-duty all steel constructionJaw locking system for hammer use
The MEXCO XCEL Grade Dual Purpose Turbo Diamond Blade. Specifically designed for fast cutting a wide range of hard and non-abrasive building products. It’s rapid cool centre and turbo fast cut segment delivers the ultimate cut at a fast speed. Recommended for contractors cutting a wide range of non-abrasive building products. Suitable for cutting; Reinforced Concrete, Clay Roof Tiles, Concrete Slabs, Granite, Ductile Iron, Quarry Tiles, Sandstone, Limestone and most non-abrasive materials.
1 x MEXCO XCEL Grade Dual Purpose Turbo Diamond Blade 350 x 20mm
The Makita B-28606-10 Screw Bit Set 37 Piece contains the following: 5 x 25mm Pozidriv Bits: PZ0, PZ1, PZ2 (x2) and PZ3.5 x 25mm Phillips Bits: PH0, PH1, PH2 (x2) and PH3.4 x 25mm Hex Bits: H3, H4, H5 and H6.11 x 25mm Torx Bits: T10, T15(x2), T20(x2), T25(x2), T27, T30(x2) and T40.7 x 25mm Tamper Proof Torx Bits: T10H, T15H, T20H, T25H, T27H, T30H and T40H.4 x Slotted Bits: SL0.5 x 4, SL0.6 x 4.5, SL1.0 x 5.5 and SL1.2 x 6.5.1 x 1/4in Hex Shank 60mm Magnetic Holder.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Suitable for cutting wood with the odd nail. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Blade Diameter: 184mm.Bore: 30mm.Teeth: 14.Rake: NEG.
This Trend 3/75 x 1/2 TCT Two Flute Cutter has the following specification: D: 12mm (15/32in)C: 63mmOL: 114mmShank Diameter: 1/2in Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. The TRE373D12TC & TRE383D12TC cutters are especially suited for drilling. TRE383M12TC has a shorter shank for Makita 3600B and 3612BR, Ryobi and Hitachi Routers.
