Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.TR12 features a solid carbide insert and centre tip for drilling. Dimensions:Shank: 1/4 inCutting Diameter (D): 12mmCutting Length (C): 19mm
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.Kitchen fitters pack containing 5 x TR17 X 1/2 TC Cutters. 12.7 mm x 50 mm.
Self-guided trimming bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges TCT. Diameter = 12.7 mmCitting Length = 25.4 mmShank size: 1/4in.
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/2in Shank.R = 12.7 mmD = 38 mmC = 19 mmBearings = 9.5 and 12.7 mm
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 3.2 mmD = 19 mmC = 9.5 mmBearings = 9.5 and 12.7 mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 16 mmD = 6 mm 15/64 in
Hook & Loop backed perforated sanding discs, which suit the following models: GE 5 / GE 5 R, GSE 5R, WSE 7 Vario Set, WSE 7 Vario Plus, WST 700 VV and WST 700 VV Plus. Size: 225mm.FLX282405 sanding discs have the following specifications:Grit size: P120Application: For rapid sanding and smoothingDiameter: 225mm.
Flexovit cloth sanding belts are made from tough and sharp high performance Aluminium Oxide. This product is extremely durable, long lasting and suitable for use on a variety of surfaces. Available in multiple sizes to suit most brands of belt sanders, and suitable for use on wood, paint and metal.Pack of 2 Flexovit Cloth Sanding Belts 610 x 100mm 120g Fine
The Faithfull Splitter creates three separate 110V 16amp outputs from one input. Ideal for running multiple power tools. Conforms to IP44 for water ingress protection. Total load applied must not exceed 1760 watts (16 amps) If a transformers is in use always check its capacity before linking a splitter socket to ensure an overload does not occur.
The Evolution XL Rolling Mitre Saw Stand made with universal fittings and 5-position height adjustment. It can support work pieces up to 4m in length and up to 300kg in weight. Perfect for handling full length ceiling beams and floor joists. The telescopic legs ensure fast and easy to set up out of the box. Compact when folded down and fitted with wheels, meaning it can be manoeuvred with one hand. This also makes it easy to store when not in use. This versatile and portable Mitre Saw Stand is perfect for home, workshop and heavy-duty on-site use. Supplied with a pair of quick-release mitre saw stand rail clamps. It also comes with a set of extender brackets for extra large saws from other manufacturers. Specifications: Max. Length Material Support: 4m.Height Range: 615-840mm (5 steps).Max. Load: 300kg.Max. Saw Mounting Hole Spacing: 680 x 370mm.
This Multi-Material Mitre Saw Blade is compatible with the following Evolution machines: R210CMS, R210SMS, R210SMS+, R210SMS-300+, R210MTS, RAGE3-S and RAGE3-S300. Specification: Diameter: 210mmBore: 25.4mmTeeth: 24Kerf: 1.7mmMax. Speed: 4,000/rpm
Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation angle Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. For use with: N57C-1CE heavy-duty Coil Nailer N58C-1-E Coil Nailer N58C-1-E Coil Nailer N66C-2-E Coil NailerFinish: Bright.Size: 2.3 x 45mm.Box quantity: 16,500.
The Wiha Magnetiser/Demagnetiser for magnetising and demagnetising blades and blade-like tools made of steel. The tool's strong permanent magnet has an extremely long service life and is also suitable for magnetising tweezers and other steel tools. Specification: Dimensions (BxHxD): 52 x 50 x 29mm.
The Wiha FlipSelector T-Bit Set 13 Piece comes with a selection of high quality T bits. Ideal for fastening T-shaped screws with an angle of 90 degree between the thread and screw head. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers and guarantees a 120 x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy to find, even in the dark by using an UV light, thanks to its fluorescent coating. This reduces the number of bits which are lost, and saves on the expense of acquiring new ones. Bits conform to DIN 3126, ISO 1173, Style C6,3. The FlipSelector case has a tried and tested design. Made from impact resistant, glass-fibre reinforced polyamide. Always ready to use, easily fits into trouser pockets. The case also features a handy belt clip. This 13 Piece Set contains the following: 5 x 25mm Phillips T-Bits: PH1, PH2(x3) & PH3. 1 x 25mm Pozidriv T-Bit PZ2. 6 x 25mm TORX T-Bits: T10, T15, T20, T25, T30 & T40. 1 x Magnetic Bit Holder 60mm.
This Faithfull Rechargeable Work Light has a compact design with an energy-efficient light that provides a powerful 2000 lumen light output, ideal for a range of working conditions. With five output modes, the light brightness can be easily selected to suit the working environment providing up to 8 hours of run time. A built-in wireless Bluetooth speaker allows compatible devices to be connected, enabling music to be played anywhere. Fitted with fold-out magnetic feet and a ratcheting stand for easier placement. A four LED display on the back of the light displays remaining power. The light can also be used as a power bank to recharge devices such as mobile phones. Supplied with a 240V mains charger. Specification: Lumen Output: 2,000/1,600/1,200/800/400Modes: 100%, 75%, 50%, 25%, 10%Run Time: 1.6hr., 2hr., 2.5hr., 4hr., 8hr.Light Source: 20W COB LEDColour Range: 6000-7000KCharge Time: approx. 4 hoursBattery: Li-ion 3.7V 4000mAhFrequency Response: 193Hz - 20kHzSpeaker: 2 x 5WBluetooth Distance: 10mWater Resistant: IP44Impact Resistant: 1mDimensions: 139 x 212 x 65mmWeight: 1kg
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service.Single Flute Cutting Diameter 1/8in - 3.2mmCutting Length. 10mmShank Diameter. 1/4in
Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells. All Paslode nails are Chrome 6, cadmium and lead-free and meet corrosion requirements. Hot Dipped Galv: Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) areas. Specification - Zinc coating minimum 50µm. Ring Shank: Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification. Clipped Head: Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5
