The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for working on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mm.Wire Height: 20mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.
For use with locknuts on angle grinders when fitting or removing abrasive discs. Made in Great BritainType: PS35-5.Pin Distance: 35 mm.Pin Diameter: 5 mm.Colour: Red.
For use with locknuts on angle grinders when fitting or removing abrasive discs. Made in Great BritainPin spanner 32 mm - 5 mm black for undoing the retaining nut on backing pads used on angle/disc grinders. Pin dimensions 32 mm indicates the distance between pin centres, 5 mm indicates the pin diameter. Suitable for Black and Decker HD series, Perles 178 mm and 230 mm disc / angle grinders. Type: Pin Spanner Size: 32 mm - 25m Colour: black
Faithfull Professional 1/4in Hexagon Drive Impact Screwdriver Bits are specifically designed and for use in high torque impact drivers. Manufactured from a unique material specially engineered for extreme durability these bits have an increased working life compared to standard screwdriver bits. Impact bits are designed to distribute impacts evenly, preventing energy waste for efficient screw driving and incorporate torsion areas to absorb torque peaks and to reduce stress at the bit tip during heavy loading. All bits feature a precision machined tip to provide an optimum fit helping to prevent screw stripping and cam-out.These Faithfull Impact Screwdriver Bits have the following specification: Size: PH3 ;x 50mm.Pack Size: 3.
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, rubber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: M14.Wire Gauge: 0.35.Wire Type: Steel.Max RPM: 12,500/min.
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special steel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.50.Wire Type. Stainless.Max. R.P.M. 12,500.
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as drilled holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 29mm.Wire: 0.35 Steel.
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special steel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12,500.
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special steel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M10.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12,500.
Four piece router bit set for use with kitchen worktop jigs. Tungsten carbide bits suitable for all routers with 1/2in collet. Set contains: 1 Straight Cutter: 12.7mm x 60mm x 1/2in shank 2 Straight Cutters: 12.7mm x 50mm x 1/2in shank 1 Flush Trim Cutter: 12.7mm x 25.4mm x 1/4in shank
Flexovit hook & loop sanding discs are tough and durable, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Hook & loop backing allows quick and easy disc changing to fit most brands of electric sanders. Suitable for use on wood, paint and metal. Size: 150mm. 6 holes.Packed in 6s
Flexovit hook & loop sanding discs are made from tough and sharp high performance aluminium oxide combined with a heavy paper backing makes this product extremely durable and long lasting. They have 8 perforated holes to fit sanders with 8 dust extraction holes. These tough and durable sanding discs, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. Hook and loop backing allows quick and easy disc changing to fit most brands of eccentric sanders. Suitable for use on wood, paint and metal Size: 115mm. 8 holes.Packed in 6s
The DEWALT FlexVolt XR Table Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with the DEWALT 54 Volt FlexVolt Table Saw to deliver maximum performance.This DEWALT FlexVolt XR Table Saw Blade has the following specification: Application: Ripping.Finish: Fine.Blade Diameter: 210mm.Bore Size: 30mm.Tooth Count: 60.Kerf Thickness: 1.80mm.Plate Thickness: 1.24mm.Grind: ATB+R.Rake Angle: 20°.
The DEWALT FlexVolt XR Table Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with the DEWALT 54 Volt FlexVolt Table Saw to deliver maximum performance.This DEWALT FlexVolt XR Table Saw Blade has the following specification: Application: Ripping.Finish: Coarse.Blade Diameter: 210mm.Bore Size: 30mm.Tooth Count: 24.Kerf Thickness: 1.80mm.Plate Thickness: 1.24mm.Grind: ATB+R.Rake Angle: 20°.
DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Crosscutting.Finish: Fine.Blade Diameter: 216mm.Bore Size: 30mm.Tooth Count: 60.Kerf Thickness: 2.16mm.Plate Thickness: 1.60mm.Grind: ATB+R.Rake Angle: 7°.
DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Crosscutting.Finish: Coarse.Blade Diameter: 216mm.Bore: 30mm.Teeth: 24.Kerf Thickness: 2.16mm.Plate Thickness: 1.60mm.Grind: ATB+R.Rake Angle: 7°.
DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Crosscutting.Finish: General Purpose.Blade Diameter: 216mm.Bore: 30mm.Teeth: 36.Kerf Thickness: 2.16mm.Plate Thickness: 1.60mm.Grind: ATB+R.Rake Angle: 7°.
A 1.1m (43in) long flexible drive shaft that will fit directly into the chuck of any cordless or electric power drill. The reinforced ends and anti-kink design prevents wear and helps provide a long working life. A 6mm (1/4in) capacity keyless chuck makes changing bits easy and the plastic hand grip provides a firm hold making the shaft easy to guide when in use. Using a flexible drive enables you to take your power tool to the most inaccessible places. It may be used with drill bits, wire brushes, countersinks, flap wheels, mounted stones and grinding wheels. PLEASE NOTE: - The 6mm shank is not hex as described on the packaging it is round.
Faithfull flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life.Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills. 6mm (1/4in) shank fits all drill chucks.Size 80 x 30mmGrade Fine (120 Grit)
Faithfull flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life.Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills. 6mm (1/4in) shank fits all drill chucks.Size 80 x 30mmGrade Medium (80 Grit)
Faithfull flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life.Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills. 6mm (1/4in) shank fits all drill chucks.Size 60 x40mmGrade Fine (120 Grit)
Faithfull flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life.Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills. 6mm (1/4in) shank fits all drill chucks.Size 60 x 40mmGrade Medium (80 Grit)
Faithfull flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life.Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills. 6mm (1/4in) shank fits all drill chucks.Size 60 x 30mmGrade Medium (80 Grit)
Faithfull flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life.Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills. 6mm (1/4in) shank fits all drill chucks.Size 60 x 40mmGrade Coarse (60 Grit)
