The Starrett RG FB Carbon Bandsaw Blade is an economical blade with a flexible carbon steel back for general purpose cutting. For cutting applications in: wood, plastics, low alloy and non-ferrous metals. It come with the ability to run at high speed and is ideal for both contour and straight cutting. Use on vertical and horizontal machines. 1 x Starrett SK FB Carbon Bandsaw Blade 2,235 x 13 x 0.65mm x 4T.
Faithfull Forstner Bits are designed with durability, accuracy, and ease of use in mind. Manufactured from forged, hardened steel for increased longevity, they feature an ultra-sharp spur to provide accurate hole drilling without walking on the material. The steep, angled cutting edges produce smooth, flat holes and create chisel-like curls for fast, clean chip removal. The centre point aids in drilling straight, angled, and overlapping holes in softwood and hardwoods, veneered wood, and non-laminated chipboard.nCompatible with all drill drivers and bench drills with a standard 8mm chuck.
1 x Faithfull Forstner Bit 15mm.
Faithfull Forstner Bits are designed with durability, accuracy, and ease of use in mind. Manufactured from forged, hardened steel for increased longevity, they feature an ultra-sharp spur to provide accurate hole drilling without walking on the material. The steep, angled cutting edges produce smooth, flat holes and create chisel-like curls for fast, clean chip removal. The centre point aids in drilling straight, angled, and overlapping holes in softwood and hardwoods, veneered wood, and non-laminated chipboard.nCompatible with all drill drivers and bench drills with a standard 8mm chuck.
1 x Faithfull Forstner Bit 20mm.
Faithfull Metal Sabre Saw Blades feature carbide metal technology for increased durability and stability. They are ideally suited for cutting tough metals with ease. These versatile straight-cut blades are compatible with all common S-shank reciprocating saws and are ideal for accurately cutting cast iron, high-strength alloys and stainless steel, up to 14mm.
1 x Faithfull S930HM Metal Carbide Sabre Saw Blade 152mm x 8 TPI
MEXCO WD XCEL Grade Wood Cut Blade. The WDXCEL uses a process of vacuum brazing to attach fine pieces of tungsten grit to the cutting edge of a steel centre; this manufacturing process allows the grit to be held constantly in contact with the material being cut producing very fast and effective stock removal. Suitable for dry cutting.
1 x MEXCO WD XCEL Grade Wood Cut Blade 125 x 22mm
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 15.0 mm 19/32in. Cutting Length 25 mm Shank Diameter: 1/4in.
These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull S1411D Sabre Saw Blade is ideal for coarse wood (20-250mm), wooden panels (up to 150mm), boards, plywood, plastic, pruning green wood (up to 250mm) and is fast cutting. Specification: Length: 300mm (12in)Teeth: 6 TPI
The SDS Max Steel tile chisel is ideal for heavy-duty chiselling, channelling and demolition tasks in concrete, stone (medium hardness), floor and wall tiles, general masonry and mortar. This tile chisel features specially toughened steel and micro-processor controlled heat treatment which ensures consistent tough bits with long life. The DEWALT DEWDT6834QZ SDS Max steel tile chisel has the following dimensions:Width: 80mmLength: 300mm
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.
The Faithfull impact grade bit holders, featuring a versatile quick release chuck, accepts all standard 1/4in hex shank bits of 25mm & 50mm length or double ended format. Engineered to withstand the extreme pressures and torque exerted by modern impact drivers and drill drivers, these holders give outstanding performance in all screw driving applications. Available in 75mm or 150mm long shafts, they help provide accessibility to the most awkward to reach places.The chuck accepts all international hex shank sizes including ANSI, JIS and DIN standard screw bits and accessories.The FAISBMBH75U is 75mm long
The DEWALT Corded Extreme Framing Circular Saw Blades have a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Can be used for ripping and cross-cutting natural timbers. Cutting composite wood based sheet materials e.g. plywood, MDF and chipboard. It is NOT recommended for timbers that may contain nails.The DEWALT DT10304QZ Circular Saw Blade has the following specifications: Blade Diameter: 190mm.Bore Size: 30mm.Tooth Count: 24.
BlueSpot set of 8 Magnetic Nut Drivers. The nut drivers are made from chrome vanadium, hardened steel and feature magnetic connector bits. Contains the following sizes: 6, 7, 8, 9, 10, 11, 12 and 13mm.
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 150mm x 20mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 4,500
The Faithfull Power Plus SMD LED Task Light has a highly efficient 20 Watt SMD (Surface Mounted Diode) LED that provides an extremely bright, glare free 2,000 Lumen's of light output and is mounted in a heavy-duty, impact resistant case rated to *IP44/54.A mirror backed reflector improves the light output and beam spread of the work light, which also has the added benefits of an integrated power take-off socket, allowing the series linking of lamps or for use with power tools*. The lamp has a 3m x 0.75mm² cable and a built-in storage system and is fitted with an approved 240 or 110 volt plug.LED work lights have many uses around the work site or home, providing a glare free bright light that avoids the high heat output associated with halogen bulbs. These lights are cool running and eliminate the fire and burn hazards associated with halogen lighting, which make them ideal for tradesmen who are working close by. They also have the benefit of not drying out plaster or similar finishes too quickly (which can happen with the heat emitted from halogen lights) which can result in cracking.*110 Volt Version is IP54 Rated, Light Maximum Load: 6.25amp Current (Max 1000W), Maximum Link: 15 Lights. Total Socket Load MUST NOT Exceed 1,000 Watt.*240 Volt Version is IP44 Rated, Light Maximum Load: 6.25amp Current (Max 2200W), Maximum Link: 20 Lights. Total Socket Load MUST NOT Exceed 2,200 Watt.Faithfull Power Plus SMD LED Task Light with Power Take Off 110 Volt Version. The 110 Volt Version is IP54 Rated, Light Maximum Load: 6.25amp Current (Max 1000W), Maximum Link: 15 Lights. Total Socket Load MUST NOT Exceed 1,000 Watt.
This Faithfull robust Cable Reel features a thermal overload protection system to prevent damage to the cable from overheating. It has 4 shuttered sockets with a maximum load of 13A (3,120W) when fully unwound, and 4A (1,000W) when wound. The cable reel is suitable for providing electrical power for both trade and DIY users. Its semi-enclosed case allows fast rewind and helps to prevent damage to the cable when in transit or storage. A flat base keeps the reel upright for easy storage and protects the sockets from contact with wet or damp areas. Manufactured in accordance to BS EN 61242.ASTA approvedCable Length: 10m.
Faithfull SDS MAX scaling chisel straight steels are produced to provide high performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular machines used in the UK. Type: Scaling Chisel.Fitting: SDS Max.FAIMAXSC75Length: 300mm Width: 75mm
These Faithfull Professional 1/4in Hexagon Drive Pozidriv Screwdriver Bits are manufactured from high strength, heat-treated S2 grade steel. Bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.These Faithfull S2 Grade Steel Screwdriver Bits have the following specification: Size: PZ2 x 25mmPack Quantity: 25
The Faithfull 240 volt open drum cable reels have a heavy-duty plastic drum on a sturdy steel frame with carry handle and a thermal overload protection system to prevent overheating damaging the cable. They are fitted with twin 240 volt sockets and the 1.25mm² cable is with fitted with a standard 240 volt plug. When using a 240v cable reel outdoors, or in the vicinity of a machine with mechanism which could damage the cable, it is recommended that an RCD device (FPP RCD) is used at the power source in conjunction with the reel. Always check that the power supply matches the voltage on the reel’s rating plate. Never attempt to connect a 240 volt appliance to a 110 volt supply and vice versa. If you need to use a cable reel, select one suitable for the power input of the appliance. Complies to BS EN 61242. NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.Cable length: 50 MetresVoltage: 240 VoltFully Unwound: 3120 Watt (13 Amps)Fully Wound: 960 Watt (4 Amps)
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3113 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 80.Pack quantity: 10.
The Faithfull TLDB4L is capable of converting the power from a single cable input into a four way output making it ideal for running multiple power tools and site lighting. The Faithfull TLDB4L is a 110 volt 4 way splitter box and comes with a 5 metre cable with 110 volt socket plug that can be used in conjunction with Faithfull 110 Volt cable reels. This unit has a strong metal construction for daily site usage, and the 4 outlets are protected from debris with flip up plastic covers which also protect the outlets when not in use. Note: Total load applied must not exceed 1760 watts (16 amps) If a transformers is in use always check its capacity before linking a distribution box to ensure an overload does not occur. 110 Volt4 x 110 Volt outlets Load must not exceed 1760 watts (16Amps)
The DEWALT Black Gold HSS Drill Bits are made with a tapered web design for extreme durability. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. While the bits also incorporate a 3-flats shank to reduce spin-out in the chuck. Suitable for drilling in plastic, wood, and metal. Pack of 3 DEWALT BLACK GOLD HSS Drill Bits 1.5mm.
The DEWALT Black Gold HSS Drill Bits are made with a tapered web design for extreme durability. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. While the bits also incorporate a 3-flats shank to reduce spin-out in the chuck. Suitable for drilling in plastic, wood, and metal. 1 x DEWALT BLACK GOLD HSS Drill Bit 3.0mm.
The DEWALT Black Gold HSS Drill Bits are made with a tapered web design for extreme durability. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. While the bits also incorporate a 3-flats shank to reduce spin-out in the chuck. Suitable for drilling in plastic, wood, and metal. Pack of 3 DEWALT BLACK GOLD HSS Drill Bits 1.0mm.
This IRWIN Bosch Palm Sander Sheets with Velcro attachment, the reduced space between the sanding sheet and the machine allows for higher removal rate. Perforation allows for more efficent dust extraction. Compatible with the BOSCH PSM160A, PSM80/80A, PRIO and Skil OCTO 7208. Specifications: Grits: 3 x K40, 2 x K80, 2 x 120K and 3 x K180.
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.Pack of 3 Faithfull Cloth Sanding Belts 400mm x 60mm 80g
The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4321 Series 60 Circular Saw Blade has the following specification: Finish: Fast Rip.Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 30.Plate Thickness: 3.0mm.Kerf Thickness: 2.2mm.Grind: ATB.Rake Angle: +10°.
Faithfull Professional Security Screwdriver Bits are designed for use with tamper-resistant, security TORX (Star) head fixings which have a small pin inside their drive recess to prevent the use of a standard TORX driver, tamper-proof fixings of this type are often found on electrical appliances. Manufactured from high-strength, heat treated ‘S2’ grade steel. These bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.Pack of 3 Faithfull Security S2 Grade Steel Screwdriver Bits T30S x 25mm
The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT410 Series 60 Circular Saw Blade has the following specification: Finish: Fast Rip.Blade Diameter: 216mm.Bore Size: 30mm.Tooth Count: 24.Plate Thickness: 1.8mm.Kerf Thickness: 2.6mm.Grind: ATBN.Rake Angle: -5°.
A dense, firm sponge for compounding 2 pack paint systems, excellent results with all leading makes of compound and polish. Also for polishing automotive paintwork, acrylic, marine and aerospace finishes. This very firm material is ideal when compounding all modern paint systems including LVHM. Diameter: 150mm x 50mm Made in Great BritainCentre Thread. 5/8 UNC
These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.This set comprises a quick chuck and three sizes of drill bit guides for accurate fitting of hinges. Contents: 1 x Quick chuck.1 x Drill bit guide 5/64in.1 x Drill bit guide 7/64in.1 x Drill bit guide 9/64in.
