The DEWALT DEWDT2161QZ HSS jigsaw blades are engineered to deliver a quality cut in a variety of ferrous and non-ferrous metals and are made from fully hardened high speed steel for increased durability. The blades have a T shank fitting for all T-shank Jigsaws. They are ideal for straight cuts in thick metal, non-ferrous metal & aluminium from 2.5 - 6mm thick. The DEWALT DEWDT2161QZ has the following specifications:Overall Length: 76mmLength: 50mmTooth Pitch: 2mmMax DOC: 6mmEquivalent Bosch Ref: T118B
These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.The DEWALT DT2166 (T144D) HCS Wood Jigsaw Blades are ideal for fast, straight cuts in wood and chipboard up to 60mm thick.
Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many uses on cars, boats, in the home, in the garage and workshop. 6 mm (1/4 in) shank fits all drills, economical and longlasting.Size. 100 x 30mm.Grit: Medium.
The DEWALT Corded Extreme Framing Circular Saw Blades have a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Can be used for ripping and cross-cutting natural timbers. Cutting composite wood based sheet materials e.g. plywood, MDF and chipboard. It is NOT recommended for timbers that may contain nails.The DEWALT DT10303QZ Circular Saw Blade has the following specifications: Blade Diameter: 184mm.Bore Size: 16mm.Tooth Count: 40.
Flexovit 1/3 sanding sheets are tough and durable sanding sheets, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Suitable for use on wood, paint and metal. Size: 93 x 230mm.Size : 93 mm x 230 mm (1/3 Sheet Size) Plain Packed in 10s
The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2205-QZ (T101B) XPC HCS Wood Jigsaw Blades provide clean and fast straight cuts in wood, chipboard and plastics.
The DEWALT Stationary Construction Circular Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. With ultra-sharp cutting edges and Alternate Top Bevel (ATB) teeth to reduce splinters. The blade features a wedge shoulder to protect the carbide from nail impact. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations, rough timber and cutting through embedded nails.This DEWALT Construction Circular Saw Blade has been designed for cutting rough timber, possibly with embedded nails. Specification: Blade Diameter: 250mmBlade Bore: 30mmTooth Count: 48Plate Thickness: 2.2mmKerf Thickness: 3.0mmGrind Type: ATBRake Angle: +10°
Perforated 1/3 sheet orbital sanding sheets. The perforated holes have two banks of three parallel dust extractions holes with one at either end of the sheet. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. These tough and durable sanding sheets, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. Suitable for use on: wood, paint & metal Size : 93 mm x 230 mm (1/3 Sheet Size) 8 Hole Configuration. Packed in 10s
Flexovit cloth sanding belts are made from tough and sharp high performance Aluminium Oxide. This product is extremely durable, long lasting and suitable for use on a variety of surfaces. Available in multiple sizes to suit most brands of belt sanders, and suitable for use on wood, paint and metal.Pack of 2 Flexovit Cloth Sanding Belts 75 x 457mm 80g Medium
Flexovit cloth sanding belts are made from tough and sharp high performance Aluminium Oxide. This product is extremely durable, long lasting and suitable for use on a variety of surfaces. Available in multiple sizes to suit most brands of belt sanders, and suitable for use on wood, paint and metal.Pack of 2 Flexovit Cloth Sanding Belts 610 x 100mm 50g Coarse
Flexovit cloth sanding belts are made from tough and sharp high performance Aluminium Oxide. This product is extremely durable, long lasting and suitable for use on a variety of surfaces. Available in multiple sizes to suit most brands of belt sanders, and suitable for use on wood, paint and metal.Pack of 2 Flexovit Cloth Sanding Belts 610 x 100mm 80g Medium
Flexovit hook & loop sanding discs are tough and durable, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Hook & Loop backing allows quick and easy disc changing to fit most brands of eccentric sanders. Suitable for use on wood, paint and metal. Size: 125mm. 8 holes.Grit: 180 (Extra Fine).Pack quantity: 6.
Flexovit hook & loop sanding discs are tough and durable, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Hook & Loop backing allows quick and easy disc changing to fit most brands of eccentric sanders. Suitable for use on wood, paint and metal. Size: 125mm. 8 holes.Grit: 120 (Fine).Pack quantity: 15.
The Starrett HSS Split Point Drill Bits have superior body strength thanks to a specialised heat treatment, they can withstand the most demanding of applications. The high-performance ecision ground carbide tips deliver consistent performance. Whilst the flute geometry provides fast material penetration and maximum debris removal.They also feature a unique chip removal/breakage accelerator.Designed to meet the requirements of professional users. Manufactured to DIN 338 Standards.
This Starrett HSS Split Point Drill Bit has the following specifications:Tip Diameter: 3.5mmWorking Length: 39mmOverall Length: 70mm
The Makita Abrasive Chop Saw Wheels offer a superb combination of long life and high cutting speed. Applications include Chop saws, Metal cutting, Fabrication, Sheet metal. Specially designed disc for the Makita range of bench cut-off saws, incorporates carefully selected grit particles and optimum reinforcement. Diemeter: 355mm.Bore: 25.4mm.Thickness: 3mm.
Metabo Starlock BIM Plunge Cut Saw Blade with high-quality teeth for long service life and high cutting quality. Lasered depth scale for precise immersion depths.
Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many uses on cars, boats, in the home, in the garage and workshop. 6 mm (1/4 in) shank fits all drills, economical and longlasting.Size. 80 x 30mm.Grit: Medium.
Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They have a 2mm micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat, indicated by distinctive black colouring and produce a clean finish to abrasive timbers such as chipboard, MDF, plywood and certain hardwoods. The dimensions are etched on the extra long 40mm shanks for quick identification and are suitable for mortice and worktops applications.The TR40D has a center tip for drilling abrasive materials.Dimensions:Shank: 1/4 inCutting Diameter (D): 15mmCutting Length (C): 25mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 25 mmD = 25.4 mm 1in
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.Ideal for cutting kitchen worktops. This cutter is especially suited for drilling. C = 50 mmD = 12.7 mm 1/2 in
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE.One Flute helical Plunge-slotting bit.8 mm Shank.D = 5 mmC = 12 mmOL = 60 mm
Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work.The TRE8127 Collet Sleeve has the following specifications:Diameter: 12.7mm (1/2in).Bore: 8mm.Overall length: 30mm.
Faithfull 150mm Hook & Loop Sanding Discs made from aluminium oxide abrasive on a flexible E-weight paper backing. With the added convenience of the Hook & Loop quick change system. Pre-punched for use on random orbital sanders with integral dust extraction systems. Suitable for use on wood, metal, plastics and filler. Hole configuration: DID2.Pack of 25 Faithfull Hook & Loop Sanding Disc DID2 Holed 150mm x 120g
The DEWALT Black Gold HSS Drill Bits are made with a tapered web design for extreme durability. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. While the bits also incorporate a 3-flats shank to reduce spin-out in the chuck. Suitable for drilling in plastic, wood, and metal. 1 x DEWALT BLACK GOLD HSS Drill Bit 7.0mm.
These Faithfull Cloth Sanding File Belts are manufactured from Aluminium Oxide resin, bonded onto a durable X-Weight cloth belt. Ideal for use on Powerfile sanders and suitable for both stock removal and finishing applications. Ideal for use on hardwoods, softwoods, ferrous metals, filler and most manmade boards such as MDF and plywood.Suitable for use with most popular powered files.Length: 455mm.Width: 13mm.Grit: 120.
Fully-adjustable, modular Trend AnyDoor Routing Jig designed to quickly and accurately recess square and 10mm radius hinges in timber doors and frames. Accommodates both full-height (1981mm/2040mm) and custom smaller doors.This kit contains: 1 x Trend Anydoor Jig, 6 x Bradawls, 1 x GB160 16mm Precision Guide Bush and 1 x Tough Carry Case with Accessory Pouch.
Starrett KSSO Multi-tool Sandpaper with a Hook & Loop surface to hold sandpaper sheets securely. Ideal for tight space sanding where orbital or belt sanders cannot reach.60 grit: Removes paint, varnish, or rough wood quickly; also ideal for removing rust.80 grit: Multi-purpose option, suitable for both removal and finishing.120 grit: Smooths surfaces, prepares for finishing.Perfect for:- Perfect for refinishing furniture- Smoothing cut edges in carpentry or drywall- Surface prep before painting, staining, or sealing- Restoration work (removing old coatings, adhesives, or rust)
Pack of 12 Starrett KSSO-08P00-12 Multi-tool Sandpaper 93mm x 80G
Starrett KSO-01C69 Flat-sided HCS Oscillating Blade with Japanese Teeth for straight cuts with minimal tear-out. Ideal for flush cutting against walls, floors, or other surfaces. Starrett oscillating blades reach tight corners and deep areas with ease, delivering smoother, more accurate finishes. Fits most popular brands of multi-tool machines. NOT compatible with Starlock.Perfect for:- Angled cuts in flooring, trim, or panelling- Flush cuts against walls or tight corners- Cutting openings in drywall or wood where a straight plunge isn’t practical- Precision work in remodelling, especially when working around obstaclesSpecifications:Width x Length: 69 x 42mmTPI: 14
3 Piece Starrett KSO-0300 General Purpose Oscillating Blade Set developed for professionals who require a broad range of combined options to handle different applications efficiently. This set covers the main cutting needs for drywall, wood, MDF, PVC, and similar materials. Fits most popular brands of multi-tool machines. NOT compatible with Starlock.Contains:1 x KSO-00B34 Plunge Bi-metal Oscillating Blade 40 x 34mm x 18 TPI1 x KSO-00C34 Plunge HCS Oscillating Blade 40 x 34mm x 18 TPI1 x KSO-00B85 Semi-Circle Bi-Metal Oscillating Blade 85mm
Starrett KSO-30065 Tungsten Carbide Grit Oscillating Blade for grout, cement board, plaster, and other abrasive materials, offering efficiency in renovation and construction projects. Fits most popular brands of multi-tool machines. NOT compatible with Starlock.Perfect for:- Removing or trimming tile adhesive and grout- Cutting fibreglass panels or abrasive compositesSpecifications:Diameter: 65mm
Starrett KSO-02S52 Scraper Blade to loosen adhesives, coatings, or stuck-on materials, providing controlled removal without gouging the underlying surface. Made from stainless steel that resists rust and oxidation, making it ideal for use in damp or humid environments (bathrooms, kitchens, outdoor work). This extends the blade’s lifespan when exposed to adhesives, caulk, or moisture. Fits most popular brands of multi-tool machines. NOT compatible with Starlock.Perfect for:- Removing paint, varnish, or flooring adhesives- Lifting carpet, vinyl, or linoleum from subfloors- Removing decorative layer from walls, in plaster or textured finish
Starrett KSSO Multi-tool Sandpaper with a Hook & Loop surface to hold sandpaper sheets securely. Ideal for tight space sanding where orbital or belt sanders cannot reach.60 grit: Removes paint, varnish, or rough wood quickly; also ideal for removing rust.80 grit: Multi-purpose option, suitable for both removal and finishing.120 grit: Smooths surfaces, prepares for finishing.Perfect for:- Perfect for refinishing furniture- Smoothing cut edges in carpentry or drywall- Surface prep before painting, staining, or sealing- Restoration work (removing old coatings, adhesives, or rust)
Pack of 12 Starrett KSSO-012P00-12 Multi-tool Sandpaper 93mm x 120G
Starrett KSO-00C69 Flat-sided HCS Oscillating Blade for flush cutting against walls, floors, or other surfaces. Starrett oscillating blades reach tight corners and deep areas with ease, delivering smoother, more accurate finishes. Fits most popular brands of multi-tool machines. NOT compatible with Starlock.Perfect for:- Angled cuts in flooring, trim, or panelling- Flush cuts against walls or tight corners- Cutting openings in drywall or wood where a straight plunge isn’t practical- Precision work in remodelling, especially when working around obstaclesSpecifications:Width x Length: 69 x 42mmTPI: 18
Pack of 5 Starrett KSO-00C69-5 Flat-sided HCS Oscillating Blades 69 x 42mm x 18 TPI
Starrett KSO-00C34 Plunge HCS Oscillating Blade for straight-in cutting, openings, and pocket cuts. Ideal for cutting directly into a surface without pre-drilling. Engineered for plunge applications, Starrett oscillating blades reach tight corners and deep areas with ease, delivering smoother, more accurate finishes. Fits most popular brands of multi-tool machines. NOT compatible with Starlock.Perfect for:- Cutting square or rectangular holes in drywall for electrical boxes- Pocket cuts in cabinetry or furniture for hardware installation- Trimming flooring around obstacles- Cutting through wood with embedded nails during demolition- Precision carpentry where clean edges are essential- Also ideal for soft materials such as plastics and PVCSpecifications:Width x Length: 40 x 34mmTPI: 18
1 x Starrett KSO-00C34 Plunge HCS Oscillating Blade 40 x 34mm x 18 TPI
Starrett KSO-00B32 Plunge Bi-metal Oscillating Blade for straight-in cutting, openings, and pocket cuts. Ideal for cutting directly into a surface without pre-drilling. Engineered for plunge applications, Starrett oscillating blades reach tight corners and deep areas with ease, delivering smoother, more accurate finishes. Fits most popular brands of multi-tool machines. NOT compatible with Starlock.Perfect for:- Cutting square or rectangular holes in drywall for electrical boxes- Pocket cuts in cabinetry or furniture for hardware installation- Trimming flooring around obstacles- Cutting through wood with embedded nails during demolition- Precision carpentry where clean edges are essential- Also ideal for soft materials such as plastics and PVCSpecifications:Width x Length: 40 x 32mmTPI: 18
Pack of 5 Starrett KSO-00B32-5 Plunge Bi-metal Oscillating Blades 40 x 32mm x 18 TPI
Starrett KSO-00B85 Semi-Circle Bi-Metal Oscillating Blade. The curved edge allows for long, straight cuts with better control. Ideal for flush cutting against surfaces, trimming door jambs, or cutting flooring around obstacles. Provides a larger cutting surface compared to narrow plunge blades, improving efficiency. Fits most popular brands of multi-tool machines. NOT compatible with Starlock.Perfect for:- Cutting drywall openings for electrical boxes- Trimming flooring or panels flush to walls- Cutting through wood with embedded nails during demolition- Making long, straight cuts in sheet materials- Ideal for rounded surfaces such as furniture, columns, drywall, and plasterSpecifications:Diameter: 85mm
