The LENOX® 800RDG DIAMOND™ Reciprocating Saw Blade with a narrow kerf design for thinner, faster cuts. The cutting edge features nickel alloy brazed diamond particles that help to maintain sharpness, so it keeps on cutting long after conventional carbide grit fails. Fitted with a durable chrome alloy backing steel that provides extra stability. LENOX® DIAMOND™ blades cut cleanly through cast iron, tile, granite and other abrasives unlike bulky snap cutters which crush pipes and leave ragged, uneven cuts.
Faithfull E-Weight Aluminium Oxide floor sanding discs are for use with edge sanders for renovating, sanding, and the finishing of wooden floors. Heavy-duty aluminium oxide sanding disc on E-Weight paper backing. Diameter: 178mm.Bore: 22mm.Floor Disc E-Weight Aluminium Oxide Grit: 120g.
BT13 Series 18 gauge brown Brad nails for use with the Bostitch brad nailer. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 15mm.Colour : Brown.Pack : Clam pack of 1000.
The Quick Chuck will fit any power drill that uses a standard 9.5 mm (3/8in) key or keyless chuck. Attachments such as the snappy range or direct drive 1/4in screwdriver bits will then snap in and out without a chuck key. The Quick Chuck has six flats on the shank to ensure non-slippage in the chuck.
Senco DuraSpin® Collated Screws for Drywall to Wood applications. Phillips No.2 drive, black phosphate finish, coarse thread, bugle head. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Wood. Size: 3.9 x 35mm.
The Lessmann DIY Steel Wire Cylinder Brush is fitted with a 6mm shank. Used for cleaning tubes, gratings, sleeves and cylinders. Ideal for use on wrought iron. Diameter: 28mmWire Gauge: 0.30Shank: 6mmMax Speed: 1,500/min.
7 Piece Bosch Mini-X-Line Masonry Drill Bit Set. Suitable for drilling in masonry, sand lime bricks, natural stone and cast stone. Supplied in a practical Bosch X-Line case for a clear layout of the contents.Contains: 7 x CYL-1 Masonry Drill Bits: 3, 4, 5, 5.5, 6, 7, 8mm.
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 6.3 mmD = 25.4 mmC = 13 mmBearings = 9.5 and 12.7 mm
The Irwin 614R Sabre Saw Blades include colour coded packaging and labelling on the blade to easily identify the right blade for the right application. These metal cutting blades have bi-metal construction with improved tooth configuration for up to 50% faster cutting. They are made with 8% Cobalt to keep teeth sharper for longer. The blades cut all metals, including non-ferrous, pipe conduit, stainless and sheet metal. Length: 150mm.Teeth: 14 tpi (1.8mm).
The Starrett SB6-A Reciprocating Blade Kit contains a selection of unified shank 3X POWER Bi-Metal reciprocating blades. They provide up to three times the life and increased cutting rates compared to our previous line, setting a new level for performance and value on the market. With an optimised tooth pitch for a reduction in vibration, offering cleaner cuts and less fatigue. They are unbreakable; providing safety and reliability. Contains: 1 x B66 Wood Cutting Blade 152 x 19 x 0.89mm, 6 TPI1 x B610 Multipurpose Blade 152 x 19 x 0.90mm, 10 TPI1 x B614 Metal Cutting Blade 152 x 19 x 0.90mm, 14 TPI1 x B618 Metal Cutting Blade 152 x 19 x 0.90mm, 18 TPI1 x B624 Metal Cutting Blade 152 x 19 x 0.90mm, 24 TPI
The Flexipads Wool Bonnet is made from ultimate Merino sheepskin wool, which has a unique double skin, making it very long-lasting. It is a professional, world-renown bonnet used by prestige car manufacturers. With GRIP fastening. Made in Great Britain. Specification: Wool Pile: 20mmMax. Speed: 2,500 rpm1 x Flexipads World Class GRIP Wool Bonnet 50mm
The DEWALT Multi-Tool Blade is a flexible scraper blade for surface removal of a wide range of materials. The blade is ideal for the following applications:Removing floor tile adhesives.Removing sealants around baths and sinks. Blade width: 35mm.
These Flexipads pads are made from the highest quality German foam, backed with velour for use with a GRIP® backing pad. They are used to create a high gloss without haze or holograms.This Black finishing pad features a soft waffle pattern for advanced compound control.
Flexovit cloth sanding belts are made from tough and sharp high performance Aluminium Oxide. This product is extremely durable, long lasting and suitable for use on a variety of surfaces. Available in multiple sizes to suit most brands of belt sanders, and suitable for use on wood, paint and metal.Pack of 2 Flexovit Cloth Sanding Belts 533 x 75mm 120g Fine
IRWIN Metal Cutting Discs offer superior performance and life. They are made of Aluminium Oxide and are ideal for cutting ferrous metals including stainless steel. Suitable for cordless and corded tools.Tin of 10 IRWIN IW8082105 Metal Cutting Discs 115 x 1.2 x 22.2mm.
The MEXCO XCEL Grade Dual Purpose Turbo Diamond Blade. Specifically designed for fast cutting a wide range of hard and non-abrasive building products. It’s rapid cool centre and turbo fast cut segment delivers the ultimate cut at a fast speed. Recommended for contractors cutting a wide range of non-abrasive building products. Suitable for cutting; Reinforced Concrete, Clay Roof Tiles, Concrete Slabs, Granite, Ductile Iron, Quarry Tiles, Sandstone, Limestone and most non-abrasive materials.
1 x MEXCO XCEL Grade Dual Purpose Turbo Diamond Blade 230 x 22mm
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 150mm.Bore: 20mm.Teeth: 12.Bush: 16 & 13mm.Rake: POS.
Faithfull flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life.Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills. 6mm (1/4in) shank fits all drill chucks.Size 60 x 40mmGrade Medium (80 Grit)
This Faithfull Sanding Disc is manufactured from Aluminium Oxide abrasive on a flexible paper backing. It is ideal for use on wood, metal and plastics to remove imperfections prior to final finishing. Designed for use on a backing pad (e.g. FAIABP125) in conjunction with any portable electric drill.Pack of 5.Diameter: 125mm.Bore: 6mm.Grade: fine/medium.
This DEWALT Multi-Tool Blade has carbide grit and is designed for grout removal. The blade is quick and easy to change and fits all common oscillating tools. Specifications:Blade length: 25mm.Blade diameter: 95mm.Blade thickness: 3mm.
These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.These Faithfull Wood Jigsaw Blades T119B provide stright cuts. Ideal for epoxy, hardwood, softwood, laminated boards, insulated and heat insulation materials and plastics.
The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. A carbon steel construction sleeve and body ensures durabilty and long life.Irwin Lock-n-Load Quick Change Extension Bit Holder Specifications: Insert bit: Standard 1/4 inch. Length: 150mm.
This Faithfull Wire Cup Brush is designed for use with angle grinders with a compatible thread. It is suitable for industrial use and more specialist applications. Crimped wire brushes are designed for lighter to medium-duty applications such as cleaning metal surfaces prior to painting.Wire: Steel Type: Cup Face Diameter: 125mm Thread: M14 x 2 Wire: 0.3mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 6,500.
The DEWALT DWV9390 Dust Bag is suitable for use with DCP580 cordless planer. It has a twist-lock connection to the chip deflector for quick emptying and is AirLock compatible.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3125 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 120.Pack quantity: 5.
These Faithfull Professional 1/4in Hexagon Drive Pozidriv Screwdriver Bits are manufactured from high strength, heat-treated S2 grade steel. Bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.These Faithfull S2 Grade Steel Screwdriver Bits have the following specification: Size: PZ2 x 50mm.Pack Quantity: 3
DEWALT DT20737 Titanium Metal Multi-tool Blade is designed for both wood and metal cutting applications. Cuts metal, wood, wood with nails, plastics and plasterboard. Durable enough to tackle tough jobs. Its titanium blade provides improved life when cutting metal. UNIVERSAL FITMENT™ for adaptor-free use with all major oscillating tool brands. Specifications: Width: 30mm.Length: 44mm.
These Faithfull Delta Sanding Sheets are manufactured from Aluminium Oxide abrasive on E-weight heavy-duty paper. They are ideal sanding wood, plastic and fillers. The sheets have a hook and loop system, enabling quick change. Specifications: Type: TR2. Size: 93mm. Pattern: 6 hole.Grade: P40 Grit Pack quantity: 25
