Trend PH/JIG/C Twin Pocket Hole Jig for new projects, strengthening and repair work in materials from 12.7mm to 38mm thick. With hardened, full-length drill guides for precision pockets and a long life span. A magnetic clamp plate aids location of the jig when clamping. Fast setup with easy adjustments for different component sizes. It can be easily relocated across any material width for infinite pocket hole positioning. The quick set drill and timber setting sliding set up gauge easily set the correct drilling depth and jig position for different material thicknesses. Compact and portable, it fits easily into a pocket or tool pouch. Ideal for jointing in hard and softwoods and sheet materials. Trend Snappy chuck compatible. Supplied with a high-quality HSS stepped drill, No.2 Square Drive bit, both with quick-change hex shanks, and a selection of screws.
Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk producing a round over profile.This Trend TCT Bearing Guided Ovolo & Round Over has the following specification: Radius: 3mmDiameter: 18.7mmCutter Height: 9.5mmShank: 1/4inBearings: 9.5, 12.7mm
The Starrett SB6-A Reciprocating Blade Kit contains a selection of unified shank 3X POWER Bi-Metal reciprocating blades. They provide up to three times the life and increased cutting rates compared to our previous line, setting a new level for performance and value on the market. With an optimised tooth pitch for a reduction in vibration, offering cleaner cuts and less fatigue. They are unbreakable; providing safety and reliability. Contains: 1 x B66 Wood Cutting Blade 152 x 19 x 0.89mm, 6 TPI1 x B610 Multipurpose Blade 152 x 19 x 0.90mm, 10 TPI1 x B614 Metal Cutting Blade 152 x 19 x 0.90mm, 14 TPI1 x B618 Metal Cutting Blade 152 x 19 x 0.90mm, 18 TPI1 x B624 Metal Cutting Blade 152 x 19 x 0.90mm, 24 TPI
The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. A carbon steel construction sleeve and body ensures durabilty and long life.Irwin Lock-n-Load Quick Change Extension Bit Holder Specifications: Insert bit: 3/8 inch. Length: 300mm.
The Flex Power Tools MH-R Rotary Sanding Head with Edge Segment can be used to sand walls and ceilings. The rotation of the sanding head edge is induced by the movement of the tool, without interruption of the sanding process. This results in a 5 times faster edge processing. Integrated sliding edges on the sanding head prevent damage to the contact surfaces on the wall and ceiling. Compatible with the GE 7 Giraffe® Sander. Specification: Diameter: 225mm
The Flex Power Tools PSX-G 60 VE2 Polishing Sponge is made from a very hard foam with an innovative X-Cut surface that guarantees a constant and evenly high removal rate. The X-Cut texture reduces the build-up of heat. The foam is heat and tear-resistant. Ideal for dealing with water droplets, orange peel, trapped dust, tar specks, scratches and bird droppings. Compatible with the PXE 80 10.8-EC Spot Polisher. Specification: Diameter: 60mmThickness: 25mm
DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Ripping, Crosscutting.Finish: Fine.Blade Diameter: 190mm.Bore: 30mm.Teeth: 60.Kerf Thickness: 1.55mm.Plate Thickness: 0.99mm.Grind: ATB+R.Rake Angle: 25°.
These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and flooring contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins.1 x Pack of 5000 DEWALT DSTSX12Z 18G Galvanised Staples 12mm
This Lessmann Pipeline Brush has the following specification: Wire: SteelNumber of Knots: 48Diameter: 178mmWidth: 6mmBore: 22.2mmMax. Speed: 12,500/bpm
Zenith unstitched mop for use with polishing compounds, eg. pink GBA/90WP compound or blue GBA/12B compound.Zenith profin unstitched calico mop for use with pink GBA/09WP compound, or blue GBA/09WP compound. Size: 6in x 50 Fold.
Zenith stitched calico mop for use with polishing compounds, e.g. grey BGF/264 compound, and brown GBT/272 compound.Zenith stitched calico mop for use with polishing compounds, e.g. grey BGF/264 compound, and brown GBT/272 compound. Size: 4in x 1 section.
Zenith Sisal mop for use with polishing compounds, e.g. grey GBF/264 compound.Zenith sisal mop for use with polishing compounds, e.g. grey GBF/264 compound. Size: 4in x 2 section.
Trend Craft Pro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.Trend C209 x 1/4 TCT Intumescent Recessor to suit 4mm thick strip of 10mm width. Specification: Diameter: 24mmCutting Depth: 10mmBearing: 16mmShank: 1/4in
The Dormer P807 Solid Carbide Bright Rotary Burr with ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it a good first choice for general machining. With a improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Ball has the following specification: Diameter: 6.3mm.Shank Diamter: 3mm.Working Length: 5mm.Overall Length: 38mm.
These Faithfull 225mm Sanding Discs have a 8 hole dust extraction pattern to fit Vitrex Long Reach sanding machines. The hook & loop backing allows easy fitting and removal. Coated with hard-wearing blue fired aluminium oxide grit that is suitable for use on drywall. This pack contains 10 Discs: 2 x 80 grit, 4 x 100 grit and 4 x 120 grit.
The Makita DEBWST06 Adjustable Mitre Saw Stand has a sturdy yet lightweight aluminium construction with a total weight of 15.3kg. It has a maximum extended width of up to 2550mm. Easy to assemble, it features tool-less installation and removal of the mitre saw and trolley castors. Compatible with all Makita mitre saws except for the following models: DLS600, LH1040/F and LH1201FL. Supplied with: 1 x Saw Mount Bracket Set, 1 x Box Wrench, 1 x Hex Bolt and 1 x Flat Washer. Specification: Height: 850mmClosed Length: 1.05mOpen Length: 2.55mMax. Loading: 225kgWeight: 15.3kg
Faithfull Point steels are produced to provide high performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK. Type: Point.Length: 380mm.Fitting: 21mm Hex shank, Kango (900/950K).
Designed to meet the needs of both the professional tradesman and the home handyman.All are Tungsten Carbide Tipped, to ensure longevity of working life, coupled with a good quality finish to the work.Ovolo produces a stepped rounded profile along the edge of the material. The guide pin enables the cutter to follow intricate shapes. 1/4in Shank.Radius 6.3mmDepth of Cutter 13.3mmShank Diameter 1/4in
The Lessmann Wheel Brushes are filled with crimped wire and are used for obtaining different surface finishes. For the removal of rust, paint and dirt, for roughening, de-burring. Stripping or polishing. A decisive factor for choosing the most suitable brush is the wire and tube diameter. Brushes with a larger tube diameter are filled with more wire, are more aggressive and have a longer life. Some of the brushes are supplied with adaptor sets that allow easy mounting on all popular grinding machines. The adaptors have the following dimensions: Set 1: 30, 22.2, 20, 16 & 12mm, 1in & 1/2in. Set 2: 40, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 3: 50, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 4: Brushes With Metal Discs Bore 50.8 & Double Keyway 7x13; Plus Adaptor to Bore 30.Diameter. 80mm.Width. 18-20mm.Min/Max Bore: 10/20mm. Wire Gauge. 0.20Wire Type. Steel Crimped.Max R.P.M. 10,000.
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work Don't use Depressed Centre cutting discs as grinding wheels1 x Faithfull Depressed Centre Metal Cutting Disc 180 x 3.2 x 22.23mm
The Dormer P803 Solid Carbide Bright Rotary Burrs have cylinders with end cuts and produce double cuts. The first choice for general machining, improves ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reducing vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr - Cylinder With Endcut has the following specification: Diameter: 6mm.Shank Diameter: 6mm.Working Length: 18mm.Overall Length: 50mm.
