Faithfull Professional Circular Saw Blade Anti Kick with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Suitable for use with table saws, radial arm saws and mitre saws, helps eliminate kick due to over feeding. Specification Blade Diameter: 250mm.Bore: 30mm.Teeth: 40.Bush: 25 & 16mm.Rake: POS.
DEWALT DXVA00-4300E Claw Utility Nozzle/Brush with stiff bristles helping to agitates surfaces for more effective debris removal. Optimised for handheld use.Compatible with 32mm (1.1/4in), 48mm (1.7/8in), and 64mm (2.1/2in) vacuum hoses.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 160mm.Bore: 30mm.Teeth: 16.Bush: 20 & 16mm.Rake: POS.
DEWALT High Performance Segmented Diamond Cutting Discs for fast cutting in masonry. Laser welded with a heat treated steel body for increased durability and long life.
1 x DEWALT DT3701 High Performance Segmented Diamond Cutting Disc 115 x 22.23mm.
DEWALT 1/3 Mesh Sanding Sheets last at least four times longer than traditional DEWALT sandpaper sheets. The fibres are drawn away from the surface into the small holes, and don't sit between the material to be sanded and the abrasive grains. This optimises the sanding effect. The dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper. Its easier to use mesh sanding sheets, as there is no requirement to match a specific dust extraction hole pattern. The mesh sheets can be cleaned, removing the dust from the holes and bring the sheets back to a nearly new condition. It also makes using a sander quicker and easier by not having to use clip fastening associated with non hook and loop sheets.DEWALT DTM8622 1/3 Mesh Sanding Sheets 120 Grit (Pack of 5).
DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Ripping, Crosscutting.Finish: Fine.Blade Diameter: 190mm.Bore: 30mm.Teeth: 60.Kerf Thickness: 1.55mm.Plate Thickness: 0.99mm.Grind: ATB+R.Rake Angle: 25°.
This Evolution Thin Steel Cutting Mitre Saw Blade has the following specification: Diameter: 185mmBore: 25.4mmTeeth: 68Kerf: 2.4mmMax. Speed: 3,900/rpm
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fine Cross Cut.Blade Diameter: 180mm.Bore: 16mm.Teeth: 40.Rake: POS.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3137 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 240.Pack quantity: 10.
DEWALT Extreme Diamond Metal Cutting Discs feature diamond technology for extreme durability and maximum work efficiency. They deliver 1,000+ cuts which is 30 times longer than thin bonded cut-off wheels. Designed for use with an angle grinder.
1 x DEWALT DT40252 Extreme Diamond Metal Cutting Disc 125 x 22.23 x 1.3mm
The Faithfull Aluminium Wide Track Cutting Guide makes easy work of marking out and cutting sheet materials. Lightweight, rigid design for effortless handling. The easy-to-operate lever action jaws have large, soft grip clamping surfaces that securely lock on to the workpiece. The extra wide and thick reinforced aluminium profile offers increased durability over many other similar products. Two integrated T-slots accept M6 bolt heads to attach workshop accessories. The heat-treated zinc plated clamping bar and glassfibre reinforced nylon jaws ensure the clamp will have a long working life. Ideal for use with plywood, MDF, most other sheet materials, and for cutting doors and worktops to size. It can also be used as a clamp when gluing smaller panels together. They can be used as a guide for jigsaws, routers and circular saws, as well as marking pencils and knives. Available in two sizes with a surface clamping capacity of either 900mm (36in) or 1250mm (50in).1 x Faithfull Aluminium Wide Track Cutting Guide 900mm (36in)
The Bosch FSN X Professional Cross-Cut Guide Rail provides maximum precision and flexibility. Whether you’re a carpenter, roofer, or wall framer, you need a tool to ensure precision angle cuts every time. This flexible cross-cutting guide rail is compatible with the GX circular saw and slides into place effortlessly. You can depend on the durability of this guide rail with its robust splinter guard. What’s more, your workpieces are protected by its secure, non-slip adhesive coating.This is the ideal cross-cutting guide rail when cutting wooden or wood composite materials in beams, window frames, small boards for flooring, ceiling, and trims, wall frames, and more. It can also be used when cutting insulation to size.
The Bosch Professional FSN 300 X is ideal when cutting angles ranging from -45° to +60°. Adjusting the angles is easy and you can cut material lengths of 300mm in 90°. Specification:Dimensions: 436 x 228 x 49mm
Bosch GTA 560 Professional Saw Stand for GTS 635-216 Professional Table Saw. Specifications: Length of Work Bench: 682mm.Height of Work Bench: 564mm.Dimensions of Folded Table: 682 x 728 x 564mm.Weight: 6.0kg.
The Bosch FSN X Professional Cross-Cut Guide Rail provides maximum precision and flexibility. Whether you’re a carpenter, roofer, or wall framer, you need a tool to ensure precision angle cuts every time. This flexible cross-cutting guide rail is compatible with the GX circular saw and slides into place effortlessly. You can depend on the durability of this guide rail with its robust splinter guard. What’s more, your workpieces are protected by its secure, non-slip adhesive coating.This is the ideal cross-cutting guide rail when cutting wooden or wood composite materials in beams, window frames, small boards for flooring, ceiling, and trims, wall frames, and more. It can also be used when cutting insulation to size.
The Bosch FSN 740 X Professional Cross-Cut Guide Rail is ideal when cutting angles ranging from -60° to +60°. Adjusting the angles is easy and you can cut material lengths of 740mm in 90°.Specification:Dimensions: 1,083 x 228 x 49mm
The Bosch FSN Professional Guide Rails utilise a unique technology enabling exact cuts. Constructed from high-quality materials and perfectly compatible with all related power tools, offering precise guidance. Complete control during operation is enabled by its easily replaceable, non-slip rubber stripes and splinter protection, resulting in a clean cutting edge. For ideal cutting results, use with plunge and circular saws. Compatible with all Bosch Professional GKS G-model circular saws, all GKT Professional plunge saws, as well as selected GST Professional jigsaws and GOF Professional routers with an adaptor.
Designed for use with angle grinders with a compatible thread and are suitable for industrial use and more specialist applications. Twist knot wire brushes are suited to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Wire: High tensile twisted steel Type: CupFace Diameter:80mmThread: M14 x 2Wire: 0.5mmConforms to ISO 9001 and DIN EN1083-1 and 2Maximum rpm 8500
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3115 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 120.Pack quantity: 10.
DEWALT 1/3 Mesh Sanding Sheets last at least four times longer than traditional DEWALT sandpaper sheets. The fibres are drawn away from the surface into the small holes, and don't sit between the material to be sanded and the abrasive grains. This optimises the sanding effect. The dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper. Its easier to use mesh sanding sheets, as there is no requirement to match a specific dust extraction hole pattern. The mesh sheets can be cleaned, removing the dust from the holes and bring the sheets back to a nearly new condition. It also makes using a sander quicker and easier by not having to use clip fastening associated with non hook and loop sheets.DEWALT DTM8621 1/3 Mesh Sanding Sheets 80 Grit (Pack of 5).
These Faithfull brushes have nylon bristles for use on wood, metal and stone. Many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2. The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.The Faithfull FAIWBN100C Nylon Wheels have a flat circular shape with the following dimensions:Size: 100mm diameter x 6mm shaft x 1.5mm bristle.
This DEWALT Extreme Runtime FlexVolt Blade has been specially designed for use with the DEWALT FlexVolt Mitre Saw. The sub-micron grade carbide teeth provide superb cutting performance and excellent, smooth chip removal. Ideal for cutting large, thick timbers and various other site materials. These FlexVolt blades offer the trade about twice the working life of standard alternative blades.This DEWALT Extreme Runtime FlexVolt Mitre Saw Blade has the following specification: Diameter: 250mmBore: 30mmTooth Count: 36
Evolution Pressurised Water Bottle for effective dust suppression on any job site. With a double-barrel foot pump allowing for continuous pressure without having to put the saw down. Plus a 3m anti-kink water hose with universal hose connector. The filling hole cap features a tough yet comfortable carry handle for portability. An essential accessory to conform to dust suppression regulations. Specification Capacity: 15 litreHose Length: 3mWeight (Empty/Full) 2.5/17.6kg
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA80 125mm. 80 grit is suitable for final grinding. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12,200 RPM.
The Flex Power Tools BP-M/SR D30 Cushioned Special Adhesive Pad for spot disc grinding is soft with 5mm foam rubber. Due to the special pad mount, it can only be used with the PXE 80 10.8-EC Spot Polisher.
Faithfull Forstner Bits are designed with durability, accuracy, and ease of use in mind. Manufactured from forged, hardened steel for increased longevity, they feature an ultra-sharp spur to provide accurate hole drilling without walking on the material. The steep, angled cutting edges produce smooth, flat holes and create chisel-like curls for fast, clean chip removal. The centre point aids in drilling straight, angled, and overlapping holes in softwood and hardwoods, veneered wood, and non-laminated chipboard.nCompatible with all drill drivers and bench drills with a standard 8mm chuck.
1 x Faithfull Forstner Bit 25mm.
These Faithfull Professional 1/4in Hexagon Drive Hex Screwdriver Bits are manufactured from high strength, heat treated ‘S2’ grade steel. Bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.These Faithfull S2 Grade Steel Screwdriver Bits have the following specification: Size: Hex 6 ;x 25mm.Pack Size: 3.
This Faithfull Screwdriver Bit Set is a useful addition to any toolkit. The 30 screwdriver bits are made from S2 steel and include the most popular types and sizes. Also included is a square drive adaptor and a quick-release holder. Contents:7 x 25mm Pozi Bits: PZ0, PZ1, PZ2 (x4), PZ34 x 25mm Phillips Bits: PH0, PH1, PH2, PH35 x 25mm Slotted Bits: 3, 4, 5, 6, 7mm7 x 25mm Hex Bits: 2, 3, 4, 5, 6, 7, 8mm7 x 25mm TORX (Star) Security Bits: TTX10, TTX15, TTX20, TTX25, TTX27, TTX30, TTX401 x 1/4in Hex to 1/4in Square Drive Adaptor1 x 1/4in Quick-Release Magnetic Ejector Bit Holder Supplied in a sturdy plastic case.
Replacement Triangular Sanding Sheets for use with the Vitrex Long Reach Sander LRS700. Must be used in conjunction with the Vitrex LRSDH001 Delta Sander Head (Stock Code: VITLRSDH01). Easy to replace, Hook & Loop attachment.1 x Pack of 10 Vitrex Triangular Sanding Sheets, 180 Grit
The Lessmann Wheel Brushes are fitted with a 6mm shank. The tight filling wire and powerful running makes these brushes excellent tools. These encapsulated brushes have a long service life due to the bedding of wire in plastic, which also prevents end breakage. The brushes have a consistent working width.The Lessmann Knotted Wheel Brushes are ideal for removing underseal, rust, de-burring and roughening. It has the following specification: Wire Type: Steel.Diameter: 75mm.Width: 8mm.Shank: 6mm.Wire Gauge: 0.50.Max Speed: 20,000/rpm.
These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull S617K Sabre Saw Blades are ideal for coarse wood, free of nails (20-100mm) and pruning green wood (up to100mm). Especially for curved cuts/plunge cuts. Specification: Length: 150mm (6in)Teeth: 3 TPI
This cutter is self guiding and can be used to produce rebates, lapjoints, tongues and rebated corners. Alternative bearings can be purchased to vary the rebate. Diameter . 35.0mm.C = 12.7mm.E = 11.1mm.B = 12.7mm. T.C.T.1/4IN Shank.
A 1.1m (43in) long flexible drive shaft that will fit directly into the chuck of any cordless or electric power drill. The reinforced ends and anti-kink design prevents wear and helps provide a long working life. A 6mm (1/4in) capacity keyless chuck makes changing bits easy and the plastic hand grip provides a firm hold making the shaft easy to guide when in use. Using a flexible drive enables you to take your power tool to the most inaccessible places. It may be used with drill bits, wire brushes, countersinks, flap wheels, mounted stones and grinding wheels. PLEASE NOTE: - The 6mm shank is not hex as described on the packaging it is round.
