Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc 180 x 3.2 x 22.23mm
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 210mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.5mm.Tooth Config: ATB.
The Makita WST07 Adjustable Mitre Saw Stand is ideal for use when cutting tiles, skirting boards and finishing battens. Supplied with an adjustable foot to prevent wobbling and quick-release mounting blocks. The stand is collapsible and easy to transport thanks to two handles and wheels. Suitable for corded and cordless slide compound and mitre saws, except for Makita models: DLS600, LH1040/F and LH1201FL. Specification: Height: 860mmClosed Length: 1.76mOpen Length: 3.83mMax. Load: 225kgWeight: 18kg
The Makita B-28606-10 Screw Bit Set 37 Piece contains the following: 5 x 25mm Pozidriv Bits: PZ0, PZ1, PZ2 (x2) and PZ3.5 x 25mm Phillips Bits: PH0, PH1, PH2 (x2) and PH3.4 x 25mm Hex Bits: H3, H4, H5 and H6.11 x 25mm Torx Bits: T10, T15(x2), T20(x2), T25(x2), T27, T30(x2) and T40.7 x 25mm Tamper Proof Torx Bits: T10H, T15H, T20H, T25H, T27H, T30H and T40H.4 x Slotted Bits: SL0.5 x 4, SL0.6 x 4.5, SL1.0 x 5.5 and SL1.2 x 6.5.1 x 1/4in Hex Shank 60mm Magnetic Holder.
DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Ripping.Finish: General Purpose.Blade Diameter: 190mm.Bore: 30mm.Teeth: 24.Kerf Thickness: 1.55mm.Plate Thickness: 0.99mm.Grind: ATB+R.Rake Angle: 25°.
These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and flooring contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins.1 x Pack of 5000 DEWALT DSTSX30Z 18G Galvanised Staples 30mm
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. These reciprocating blades are ideal for general purpose use in wood, metal, tough plastic and sandwich materials. The Universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil.The DEWALT DEWDT2348QZ reciprocating blades are ideal for use in tough plastics, sandwich material and pipes from 3-12mm thick.
Trend guide bushes can be attached to the base of the Router. They are designed to follow the contours of a template.Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. GB12 = 12mm, Outside Diameter of Bush.
Flexovit hook & loop sanding discs are made from tough and sharp high performance aluminium oxide combined with a heavy paper backing makes this product extremely durable and long lasting. They have 8 perforated holes to fit sanders with 8 dust extraction holes. These tough and durable sanding discs, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. Hook and loop backing allows quick and easy disc changing to fit most brands of eccentric sanders. Suitable for use on wood, paint and metal Size: 115mm. 8 holes.Packed in 6s
Faithfull Point steels are produced to provide high performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK. Type: Point.Length: 450mm.Fitting: 21mm Hex shank, Kango (900/950K).
Senco DuraSpin® Collated Decking screws with a green Weatherex coating. Square No.2 drive, coarse thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Decking Screws with Weatherex coating. Size: 4.2 x 65mm.
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 35 SKU BT13350GA Finish GALV Description MINIBRADS 35 GALVA 5M Qty per box 5000
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 30 SKU BT1330GA Finish GALV Description MINIBRADS 30 GALVA 5M Qty per box 5000
These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 25mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 3,350
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 180mm.Bore: 30mm.Teeth: 24.Kerf Thickness: 2.5mm.Tooth Config: ATB.
This BlueSpot 85 piece Cut-Off Wheel Accessory Set comprises the following: 2 x 1.1/4in Reinforced cut-off wheels.6 x 1.1/4in Fibreglass-reinforced cut-off wheels.2 x 1/8in Mandrels.40 x 15/16in Emery cut-off wheels.35 x 15/16in Cut-off wheels.
The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4321 Series 60 Circular Saw Blade has the following specification: Finish: Fast Rip.Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 30.Plate Thickness: 3.0mm.Kerf Thickness: 2.2mm.Grind: ATB.Rake Angle: +10°.
