JG Underfloor 9 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 9 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor 7 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 7 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor 5 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 5 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications onl
Speedfit conduit pipe is a tube used to protect and route plumbing pipes installed in concrete or masonry in a building or structure.
Durable corrugated design Colour coded for easy identification of service type
JG Lowfit cold forming bend helps create a tighter and more rigid pipe bend than the minimum allowed when the pipe is unsupported.
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Suitable for underfloor heating applications only
JG LowFit Edge Strip is used around the edge of a solid (screed) floor to provide an expansion gap as the floor heats up and cools down. It also has insulating properties ensuring heat loss is kept to a minimum.
Foam edge strip for screed floors
Acts as an expansion gap when the floor heats up and cools down
JG LowFit conduit elbow allows for transition from JG Speedfit pipe from the UFH manifold pipework to conduit piping run within the floor. It can be fixed or free standing.
90ºC angle
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and JG Speedfit Conduit Pipe
Suitable for underfloor heating applications only
The JG Underfloor Manifold Connection Kit is designed for connecting multiple JG LowFit or JG Underfloor Manifolds together. It is an ideal solution for larger properties that require multiple loops per room, or when additional underfloor heating (UFH) circuits are required on an existing installation.
The kit is easy to installl and comes complete with sealing washers. Simply remove the blanking plugs from the existing manifold at the end of both flow and return bars. Insert the sealing washer into the connectors and tighten. The additonal manifold can then be connected to the other end, creating further circuits, whilst still using a single JG Underfloor Thermomix Control Kit.
The manifold flow meters will need to be recalibrated after installation on both manifolds to ensure optimum performance.
Connects two JG Underfloor or JG LowFit manifolds
Quick & easy to fit with union connections
Kit contains both adaptors for flow and return bars and sealing washers
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
JG LowFit™ mesh panels are designed to be installed over existing timber or concrete floors, while maintaining a low overall floor height. The 16mm panel is lightweight with high compressive strength.
The mesh layer allows for tiling directly to the panel* and is pre-grooved to include return bends that eliminate the need for additional panel variations.
*In some cases, a decoupling layer may be required, always consult the
flooring supplier for advice.
Ideal solution for laying over timber or concrete floors
Easy to install 16mm panel allows for 12mm pipe applications and a lower overall floor height
High heat output from a low-level floor build
Light-weight system with high compressive strength
Return bends are indented into the board making installation easy.
Mesh layer allows for tiling directly onto the surface, ensuring a lower overall floor height.
Made from 100% recyclable material
Suitable for underfloor heating applications only
JG LowFit™ foil panels are designed to be installed over existing timber or concrete floors, while maintaining a low overall floor height.
The 16mm panel is lightweight with high compressive strength and is pre-grooved with return bends to eliminate the need for additional panel variations. Foil is moulded into the straight grooves to enhance system performance.
Return bends can be easily cut with a small knife to suit the system design and speed up installation.
Ideal solution for laying over existing timber or concrete floors
Suitable for single or multi-rooms
Easy to install low profile 16mm panel for 12mm pipe
Lightweight panel with high compressive strength
Good heat output from a non-screeded system
Return bends are indented into the panel for easy installation
Pre-grooved channels with a thick foil covering creates excellent heat dispersion
Made from 100% recyclable material
No wet trades required
Suitable for underfloor heating applications only
JG LowFit™ 16mm castellated panels are designed to provide a high output and low height screed floor underfloor system.
The 16mm panel has equally spaced castellations at 50mm to allow 12mm pipe to be clipped in securely and accurately as per design specifications.
Installation of the panels is fast and simple as it features an overlapping alignment system for simple hassle-free panel laying, as well as a super strong adhesive backing. This allows for the panel to be installed directly onto the existing sub floor structure. The open grid design ensures the screed layer poured on top flows smoothly and evenly over the panel.
Ideal solution for screed floor applications
Easy to install low profile 16mm panel for 12mm pipe (total floor height including screed is 19-21mm)
Excellent performance with a high heat output at low flow temperatures
Versatile application that is compatible with 50, 100, 150 or 200mm castellation spacing
Open grid design allows better flow of screed around pipes and castellations for a solid stable floor makeup
Each panel has a peel off adhesive backing film for hassle-free and secure installation to the sub-floor
Panels are linked together with a simple overlap system to ensure accurate alignment
Made from 100% recyclable material
Suitable for underfloor heating applications only
JG LowFit™ 20mm castellated panels are designed to provide a high output, low height, screeded underfloor system.
The 20mm panel has equally spaced castellations at 50mm to allow 15mm pipe to be clipped in securely and accurately as per design specifications
Installation of the panels is fast and simple as it features an overlapping alignment system for simple hassle-free panel laying, as well as a super strong adhesive backing. This allows for the panel to be installed directly onto the existing sub floor structure. The open grid design ensures the screed layer poured on top flows smoothly and evenly over the panel.
Ideal solution for screed floor applications
Easy to install low profile 20mm panel for 15mm pipe (total floor height including screed is 23-25mm)
Excellent performance with a high heat output at low flow temperatures
Versatile application that is compatible with 50, 100, 150 or 200mm pipe spacing (centres)
Open grid design allows better flow of screed around pipes and castellations for a solid stable floor makeup
Each panel has a peel off adhesive backing film for hassle-free and secure installation to the subfloor
Panels are linked together with a simple click together system ensures accurate alignment
Made from 100% recyclable material
Suitable for underfloor heating applications only
JG Aura Wireless Boiler Receiver communicates with the wireless thermostats via the wireless wiring centre. Simple to install with no wiring.
Remotely switches a boiler on and off
For use with the JG Aura Wiring centre
JG Aura Wireless Coordinator is an essential component that communicates with the wireless system and facilitates automated pairing of the JG Aura heating control system.
Coordinates and automatically pairs JG Aura devices
Mains power plug provided
For use with JG Aura Wireless heating controls (thermostats)
JG Aura Hub is used to enable the Internet control option on the JG Aura Wireless Thermostats. The hub acts as an Internet interface that allows full control of the time and temperature in all ports from a smartphone, tablet or computer.
Plug and play wireless hub
Internet connection and user Licence required
For use with JG Aura Wireless heating controls (thermostats)
JG Aura Wireless Thermostat 230v is an energy saving solution for controlling underfloor heating (UFH) systems, individual radiators and boiler switching. The 4-in-1 thermostat can be used as a programmable room thermostat, group control thermostat, group thermostat or hot water timer.
The mains-wired thermostat removes the hassle of replacing batteries and enhances the wireless signal as each unit acts as a repeater. It also offers individual and multi-room control and heating can be regulated from anywhere and at any time using the free JG Aura app.
When internet enabled, controls require no maintenance as they automatically update.
Energy and cost savings of up to 40%
Individual or multi-room heating controls
Regulates underfloor heating, individual radiators and/or boilers
Unique 4-in-1 thermostat
230v mains wired, wireless network
Slimline design with touch sensitive controls
Free Smart App control option
JG Aura Wireless Thermostat 230v is an energy saving solution for controlling underfloor heating (UFH) systems, individual radiators and boiler switching. The 4-in-1 thermostat can be used as a programmable room thermostat, group control thermostat, group thermostat or hot water timer.
The mains-wired thermostat removes the hassle of replacing batteries and enhances the wireless signal as each unit acts as a repeater. It also offers individual and multi-room control and heating can be regulated from anywhere and at any time using the free JG Aura app.
When internet enabled, controls require no maintenance as they automatically update.
Energy and cost savings of up to 40%
Individual or multi-room heating controls
Regulates underfloor heating, individual radiators and/or boilers
Unique 4-in-1 thermostat
230v mains wired, wireless network
Slimline design with touch sensitive controls
Free Smart App control option
JG Aura Wireless Thermostat Battery is an energy saving solution for controlling underfloor heating (UFH systems), individual radiators and boiler switching. The 4-in-1 thermostat can be used as a programmable room thermostat, group control thermostat, group thermostat or hot water timer.
The battery-powered thermostat gives you the flexibility of a wire free installation and are ideal for retrofitting without the need to disturb walls. It also offers individual and multi-room control and heating can be regulated from anywhere and at any time using the free JG Aura app.
When internet enabled, controls require no maintenance as they automatically update.
Energy and cost savings of up to 40%
Individual or multi-room heating controls
Regulates underfloor heating, individual radiators and/or boilers
Unique 4-in-1 thermostat
Battery powered, wireless network
Slimline design with touch sensitive controls
Free Smart App control option
JG Aura Wireless Wiring Centre is a complete wiring solution for underfloor heating (UFH), radiators and hot water control and can accommodate up to 8 thermostats and a wireless hot water timer for cable free installations.
Wiring solution for underfloor heating, radiators and hot water
Supports 8 thermostats and a wireless hot water timer
JG Aura 230v Thermostat is an energy saving solution for controlling underfloor heating (UFH) systems, individual radiators and hot water. The 4-in-1 thermostat can be used as a programmable room thermostat, group control thermostat, group thermostat or hot water timer.
The Group Thermostat can control up to eight thermostats, including digital and dial thermostats and a hot water timer. The optional data cable is not required if the thermostats are used as individual Programmable Room Thermostats. The mains wired thermostat removes the hassle of replacing batteries
Energy and cost savings of up to 40%
Individual or multi-room heating controls
Regulates underfloor heating, individual radiators and/or boilers
Unique 4-in-1 thermostat
230v mains wired
Slimline design with touch sensitive controls
JG Aura 230v Thermostat is an energy saving solution for controlling underfloor heating (UFH) systems, individual radiators and hot water. The 4-in-1 thermostat can be used as a programmable room thermostat, group control thermostat, group thermostat or hot water timer.
The Group Thermostat can control up to eight thermostats, including digital and dial thermostats and a hot water timer. The optional data cable is not required if the thermostats are used as individual Programmable Room Thermostats. The mains wired thermostat removes the hassle of replacing batteries
Energy and cost savings of up to 40%
Individual or multi-room heating controls
Regulates underfloor heating, individual radiators and/or boilers
Unique 4-in-1 thermostat
230v mains wired
Slimline design with touch sensitive controls
JG Aura Dial Thermostat regulates temperature on underfloor heating (UFH) systems using the slide switch on the thermostat dial.
3 temperature settings (automatic, manual and frost)
Suitable for underfloor heating applications only
JG Aura 230v 8 Port Wiring Centre is a complete wiring solution for underfloor heating (UFH), radiators and hot water control. The unit accommodates up to 8 thermostats and a hot water timer.
Wiring solution for underfloor heating, radiators and hot water
Supports 8 thermostats and a wireless hot water timer
LED indicators on the front panel
Clearly labelled board ensure hassle-free installation
Suitable for underfloor heating applications only
JG Aura Probe box houses JG Aura Probe sensors. It ensures the probe is protected from humidity within bathrooms and wet rooms. A JG Aura Probe is required and sold separately.
Monitors and controls temperature
Prevents overheating
Single room underfloor heating pack for areas up to 30m2
Single zone control pack suitable for up to 30m2
Ready to plug in, pre-assembled control unit and Grundfos UPM3 circulating pump
2 coils of JG Layflat pipe (15mm x 150m)
JG Aura 230v Thermostat (programmable)
300 x pipe clips and 8 x pipe inserts (15mm)
2 JG Speedfit Equal Tees and 2 Stem Elbows (15mm)
High heat output and response
Anti-vibration mounting bracket for silent operation
Suitable for solid concrete or beam and block subfloors
JG Underfloor room pack 20m2 is an underfloor heating solution for a single room such as a conservatory, kitchen, bathroom or extension up to 20m2.Everything you need comes in one handy box at an affordable price. The room pack features JG Speedfit push-fit connections, JG Layflat pipe and a mains-wired JG Underfloor Controls 240v thermostat, as well as necessary installation components.
Features and benefits:
Single zone control pack suitable for up to 20m2.
High heat output and response
Anti-vibration mounting bracket for silent operation
Suitable for solid concrete or beam and block subfloors
Pack Includes:
Ready to plug in, pre-assembled control unit and Grundfos UPM3 circulating pump
1 Coil of JG Layflat pipe (15mm x 150m)
JG Underfloor Controls 240v Thermostat (programmable)
200 x pipe staples
2 x pipe inserts (15mm)
2 x JG Speedfit Equal Tees
2 x Stem Elbows (15mm)
