JG Underfloor Edge Strip is used around the edge of a solid (screed) floor to provide an expansion gap as the floor heats up and cools down. It also has insulating properties ensuring heat loss is kept to a minimum.
Foam edge strip for screed floors
Acts as an expansion gap when the floor heats up and cools down
JG Underfloor floor clips screw easily into the insulation to secure 15mm pipe, they are best installed using a JG Underfloor fixing tool.
Secure pipe fixing floor clips
Screw down 15mm pipe clips
JG Underfloor Staple Gun is used for securing staples to the pipe and insulation in screed floor applications.
Robust staple gun
Easy repeatable action
Use with JG Underfloor staples (not included)
Suitable for underfloor heating applications only
JG Underfloor Pipe Staples are used to quickly and securely fix underfloor heating pipework to insulation. Suitable for screed floor applications, this method of pipe fixing is cost-effective and offers high heat output and response.
The pipe staples are barbed to ensure a secure grip and are easy to install when using a JG Underfloor Staple Gun.
Screed pipe fixing system
Barbed staples secure pipe to insulation
Ideal for regular and irregular shaped rooms
Conduit required when pipework runs through adjacent rooms
Suitable for underfloor heating applications only
JG Underfloor Angle Ball Valve is a service valve that isolates supply to the underfloor heating (UFH) manifold and control pack.
The ball valve connects the main heating flow and return pipe to the mixing valve, while allowing the supply to the control pack to be safely isolated for maintenance purposes. The angle design allows it to be used in both vertical or horizontal pipe arrangements.
Replacement ball valve for a JG Thermomix Control Pack
Durable DZR brass with nickel plate finish
Angle design for vertical or horizontal pipe arrangements
JG Speedfit push-fit connections for fast and simple install
JG Underfloor manifold ball valve is designed for installation to the return feed connection to a JG Underfloor Heating manifold
Durable DZR brass with nickel plate finish
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
Suitable for JG Underfloor heating manifolds manufactured prior to April 2014
JG Underfloor Spreader Plates (From Above) is an underfloor heating (UFH) pipe fixing system designed for use with timber suspended or floating floors, where a low height build up is required.
15mm pipe is installed into single or double grooved aluminium spreader plates that transmit heat evenly across the floor. insulation is placed in the void below the plates to minimise downward heat loss. Ideal for new builds, extensions and renovations, especially first floor levels.
For existing floor structures install between battens and for new floors, fix between existing joists. If the floor can be raised, floors can also be counter-battened to make installation even easier.
Timber floor pipe fixing system
Aluminium heat diffusion plates
Options for traditional or composite joists
Low height build up
Medium heat output and response
Ideal for all room sizes, single or multi room
Suitable for underfloor heating applications only
JG Underfloor manifold ball valve is designed for installation to the flow supply connection to a JG Underfloor heating manifold.
Durable DZR brass with nickel plate finish
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
Suitable for JG Underfloor heating manifolds manufactured prior to April 2014
JG Underfloor 3 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 3 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor 2 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 2 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Aura Probe is used to control underfloor heating (UFH) temperature in rooms where moisture could cause an issue e.g. wet rooms or bathrooms. The sensor is ideal for areas where thermostats cannot be directly installed. It can also control floor temperature where overheating would cause damage. A JG Aura Probe box is required and sold separately.
Monitors and controls temperature
Prevents overheating
JG Underfloor Underfit Board is a low-profile underfloor heating (UFH) pipe fixing system designed for existing timber suspended or floating floor structures. Ideal for retrofit projects, the pipe fixing system provides no height build up and is suitable for ground and first floor level applications.
15mm pipe is easily installed into a grooved foil-faced panel over an existing floor, either between battens or under the floor between joists. Maximum pipe circuit length is 100m with a recommended flow temperature of 50-60ºC.
Existing floor pipe fixing system
Lightweight insulated panel
Grooved foil-faced panel with 200mm centres
Low height build up
Medium to low heat output and response (approx. 50-60w/m2)
Ideal for rooms of all sizes and shapes
Suitable for underfloor heating applications only
JG Underfloor Overfit Board is a low-profile underfloor heating (UFH) pipe fixing system designed for existing floor structures. Ideal for retrofit projects, the pipe fixing system provides low height build up and is suitable for ground and first floor level applications.
15mm pipe is easily installed into a grooved foil-faced panel over an existing subfloor. Maximum pipe circuit length is 100m with a recommended flow temperature of 50-60ºC.
Existing floor pipe fixing system
Lightweight insulated panel with compressive strength
Grooved foil-faced panel with 200mm centres
Low height build up
Medium to low heat output and response (approx. 50-60w/m2)
Ideal for rooms of all sizes and shapes
Suitable for underfloor heating applications only
JG Underfloor 12 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 12 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor 10 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 10 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor 6 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 6 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor 8 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 8 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor 4 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 4 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor Thermomix Control Pack mixes and controls water temperature for underfloor heating systems (UFH) up to 14kW. The nickel plated unit features a mixing valve, Grundfos A rated pump, return elbow, manifold adaptor and necessary seals.
It also connects directly to the manifold without the need for extra brackets and can be mounted either side of the manifold to suit the application. The unit can also be used to isolate UFH system components for maintenance purposes.
Integral mixing valve, Grundfos A rated pump, return elbow, manifold adaptor and seals
Lightweight and nickel plated design
Automatically adjust pump speed to suit heat load (3 speed settings)
JG Speedfit push-fit connections allow for horizontal or vertical pipe runs
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
Mountable either side of the manifold
Suitable for JG Underfloor manifolds only
JG Underfloor control unit is used to provide heating to a conservatory or room extension up to 30m². It is suitable for use when the boiler serving the existing heating system has the capacity to take the extra output from 2KW to 3KW and the maximum area to be heated is 30m2 or less.
The unit is pre-assembled and pre-wired to allow for a fast and simple installation. It can be plugged into any convenient electrical socket or spur. It also has integral ball valves for isolation from the primary heating system, an adjustable blending valve and a six-metre head circulation pump.
It should ideally be connected to the main central heating flow and returns distribution system, but it can connect to the nearest radiator supply pipe. In this case, the pump will not operate independently and will only obtain hot water when the radiator system is on.
Pre-wired and pre-assembled for a fast a simple installation
Single zone control unit for conservatories and extensions
JG Speedfit push-fit connections
Plug directly into an electrical socket or spur
Integral ball valves for isolation from the primary heating system
Adjustable blending valve and 6m head circulation pump
Anti-vibration mounting bracket
Suitable for underfloor heating applications up to 30m2
JG Speedfit thread washer is for use with female couplers or tap connectors. Designed, manufactured and assembled in the UK
Replacement thread seal for Speedfit tap connectors and FBSP fittings
Suitable for cold and hot water and central heating
John Guest tube cutter is designed for accurately cutting LLDPE tubing up to 22mm. Simply mark where the pipe needs to be cut and then use the handy clamp action to cut a square edge, prefect for pipe insertion into a John Guest fitting.
Suitable for cutting plastic pipe only
Suitable for sizes up to 22mm
JG Speedfit nail clip is used to fix pipe to timber when running concealed pipe work. This compact option uses a screw to secure in place and takes less time to fit, which allows pipe to be fitted closer together when space is at a premium. Designed, manufactured and assembled in the UK.
Simple hammer in installation
Screw to secure in place
Compatible with plastic or copper pipe
Suitable for hot and cold water or central heating pipework
JG Speedfit nail clip is used to fix pipe to timber when running concealed pipe work. This compact option uses a screw to secure in place and takes less time to fit, which allows pipe to be fitted closer together when space is at a premium. Designed, manufactured and assembled in the UK.
Simple hammer in installation
Screw to secure in place
Compatible with plastic or copper pipe
Suitable for hot and cold water or central heating pipework
JG Speedfit nail clip is used to fix pipe to timber when running concealed pipe work. This compact option uses a screw to secure in place and takes less time to fit, which allows pipe to be fitted closer together when space is at a premium. Designed, manufactured and assembled in the UK.
Simple hammer in installation
Screw to secure in place
Compatible with plastic or copper pipe
Suitable for hot and cold water or central heating pipework
JG Speedfit pipe clip & spacer is used to fix pipe to timber when running concealed pipe work. This option uses a screw to secure in place. When pipes are required to cross over, a pipe spacer can be added to the clip. If pipework needs to be insulated, the spacer will give room for any lagging to be applied. Available in white, red and blue. and designed, manufactured and assembled in the UK.
Over clip to ensure pipe is fully secured when mounted Colour coded to allow for easy identification of water services
Compatible with plastic or copper pipe
Suitable for hot and cold water or central heating pipework
JG Speedfit pipe clip & spacer is used to fix pipe to timber when running concealed pipe work. This option uses a screw to secure in place. When pipes are required to cross over, a pipe spacer can be added to the clip. If pipework needs to be insulated, the spacer will give room for any lagging to be applied. Available in white, red and blue. and designed, manufactured and assembled in the UK.
Over clip to ensure pipe is fully secured when mounted Colour coded to allow for easy identification of water services
Compatible with plastic or copper pipe
Suitable for hot and cold water or central heating pipework
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK.
Compatible with plastic or copper pipe
Suitable for hot and cold water and heating applications
JG Speedfit release aid allows a firmer grip on the collet when removing pipes. Designed, manufactured and assembled in the UK.
Provides a firmer grip on the collet demounting pipe
For use with Speedfit fittings
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK.
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
Suitable for hot and cold water and heating applications
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of service type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of service type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of service type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
JG Speedfit collet cover prevents the accidental removal or tampering with piping. The pipe can be inserted with the collet cover already attached to the push-fit fitting or the cover can slide into position afterwards. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of supply type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
Used in conjunction with Speedfit barrier pipe and conduit,The JG Speedfit conduit elbow push-fit fitting allows the conduit protection to be terminated within the 90° bend. Designed, manufactured and assembled in the UK.
Compatible with plastic or copper pipe
Suitable for hot and cold water and heating applications
