Pipe Fittings

Designed with two extra o-rings, this Superseal pipe insert delivers an enhanced dual-action seal as well as creating a more rigid connection between a JG Speedfit pipe and push-fitting. These inserts provide valuable extra support for your pipework, ensuring that pipe ends keep their round shape. • Suitable for JG Speedfit pipes and fittings only • Two extra o-rings provide improved sealing • Creates a rigid connection and provides extra support to pipework • Suitable for hot and cold water services • Can be used on central heating systems • Minimum operating temperature of 20°C • Maximum operating temperature of 105°C • 12 bar maximum operating pressure at minimum temperature • 3 bar maximum operating pressure at maximum temperature • 50-year manufacturer’s guarantee (T&Cs apply) • Manufactured to BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved • Standard TSM inserts must be used when connecting to a compression fitting SPECIFICATION A Size 15 mm Brand JG Speedfit CE Standard (Tested to EN...) BS 7291, KM 39767. Manufacturer Guarantee 50 Year Manufacturer's Guarantee (T&Cs Apply) Max. Pressure @ Max. Temperature 12 bar Max. Pressure @ Min. Temperature 12 bar Maximum Operating Temperature 95 °C Minimum Operating Temperature 4 °C Model Name Superseal Pack Size 2 Pieces in Pack/Case 2 Pipe Fitting Material Plastic Pipe Fitting Product Type Inserts Pipe Fitting System Push-Fit Product Type Pipe Inserts

Read more less

Designed with two extra o-rings, this Superseal pipe insert delivers an enhanced dual-action seal as well as creating a more rigid connection between a JG Speedfit pipe and push-fitting. These inserts provide valuable extra support for your pipework, ensuring that pipe ends keep their round shape. • Suitable for JG Speedfit pipes and fittings only • Two extra o-rings provide improved sealing • Creates a rigid connection and provides extra support to pipework • Suitable for hot and cold water services • Can be used on central heating systems • Minimum operating temperature of 20°C • Maximum operating temperature of 105°C • 12 bar maximum operating pressure at minimum temperature • 3 bar maximum operating pressure at maximum temperature • 50-year manufacturer’s guarantee (T&Cs apply) • Manufactured to BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved • Standard TSM inserts must be used when connecting to a compression fitting SPECIFICATION A Size 10 mm Brand JG Speedfit CE Standard (Tested to EN...) BS 7291, KM 39767. Manufacturer Guarantee 50 Year Manufacturer's Guarantee (T&Cs Apply) Max. Pressure @ Max. Temperature 12 bar Max. Pressure @ Min. Temperature 12 bar Maximum Operating Temperature 95 °C Minimum Operating Temperature 4 °C Model Name Superseal Pack Size 4 Pieces in Pack/Case 4 Pipe Fitting Material Plastic Pipe Fitting Product Type Inserts Pipe Fitting System Push-Fit Product Type Pipe Inserts

Read more less

This valve allows the user to stop the flow of water to a fixture or zone in case of emergency or repair. John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. The push-fit stop valve for the connection of plastic and copper pipe. A must for any dwelling. The valve allows the user to stop the flow of water to a fixture or zone in case of emergency or repair. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. • Suitable for hot and cold water services, NOT suitable for central heating systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 65 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Material Plastic Manufacturer ID 15STV/2 Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type Stop Cock

Read more less

John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. The push-fit brass chrome plated service valve for the connection of plastic and copper pipe. The valve allows the user to stop the flow of water to a tap in case of emergency or repair via a 1/4 turn of a screw on the valve. To install, simply push the valve fully on to the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. • Suitable for hot and cold water services, NOT central heating systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour Grey Material Plastic Manufacturer ID 15SV Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type Valve

Read more less

Peace of mind protection from accidental pipe disconnection JG Speedfit collet cover prevents the accidental removal or tampering with piping. The pipe can be inserted with the collet cover already attached to the push-fit fitting or the cover can slide into position afterwards. Designed, manufactured and assembled in the UK. Features and benefits Colour coded for easy identification of supply type For use with Speedfit fittings Suitable for hot and cold water and central heating systems Application Hot and cold water and central heating systems Purpose Peace of mind protection from accidental pipe disconnection

Read more less

Choose this stop end to cap off pipework as part of a temporary or permanent installation. Part of the JG Speedfit plastic push-fit system, the 22mm stop end is easy to fit, and is demountable without tools – it can be quickly removed whenever you need to resume work or extend the system. The stop end is really useful if you have to pause your job for any reason, or if the water needs to be turned back on overnight. It’s also very helpful when pressure-testing a system before appliances are connected. • Caps off pipework quickly and easily • Install in seconds by hand – just push it fully onto the pipe • Tool-free demounting means you can resume work quickly • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PSE4622W Warranty (years) 50 Diameter (mm) 22 Pack Size 2 Fitting Type Stop End

Read more less

Choose this stop end to cap off pipework as part of a temporary or permanent installation. Part of the JG Speedfit plastic push-fit system, the 15mm stop end is easy to fit, and is demountable without tools – it can be quickly removed whenever you need to resume work or extend the system. The stop end is really useful if you have to pause your job for any reason, or if the water needs to be turned back on overnight. It’s also very helpful when pressure-testing a system before appliances are connected. • Caps off pipework quickly and easily • Install in seconds by hand – just push it fully onto the pipe • Tool-free demounting means you can resume work quickly • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PSE4615W Warranty (years) 50 Diameter (mm) 15 Pack Size 5 Fitting Type Stop End

Read more less

Choose this stop end to cap off pipework as part of a temporary or permanent installation. Part of the JG Speedfit plastic push-fit system, the 15mm stop end is easy to fit, and is demountable without tools – it can be quickly removed whenever you need to resume work or extend the system. The stop end is really useful if you have to pause your job for any reason, or if the water needs to be turned back on overnight. It’s also very helpful when pressure-testing a system before appliances are connected. • Caps off pipework quickly and easily • Install in seconds by hand – just push it fully onto the pipe • Tool-free demounting means you can resume work quickly • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PSE4615W Warranty (years) 50 Diameter (mm) 15 Pack Size 2 Fitting Type Stop End

Read more less

John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit bent tap plastic fitting for the connection of plastic and copper pipe. Simply push the bent tap fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. • Can be used in tight spaces and removes the need to hot works on site • Suitable for hot and cold water services, central heating systems and combi systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID 15BTC (1/2) Diameter (mm) 15 Pack Size 1 Fitting Type Tap Connector Equal or Reducing Adapting

Read more less

John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. • Suitable for hot and cold water services, central heating systems and combi systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic & Brass Manufacturer ID PEMSTC2216 Warranty (years) 50 Diameter (mm) 22 Pack Size 1 Fitting Type Tap Connector Equal or Reducing Adapting

Read more less

John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. • Suitable for hot and cold water services, central heating systems and combi systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic & Brass Manufacturer ID PEMSTC1514 Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type Tap Connector Equal or Reducing Adapting

Read more less

Need to securely connect three pipes of the same size? If you’re using the JG Speedfit push-fit system, you’ll need this equal tee connector – it can be used with plastic or copper pipes, and is a far faster way of connecting than using traditional methods. Installation is simple – you just push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. No tools are needed, which makes it far easier to manoeuvre in tight spaces or to readjust joins. Tool-free dismounting is equally straightforward, by unlocking the nut and pushing the collet towards the body of the fitting. Then, you just need to pull the pipe to release it. • Install or demount in seconds, without the need for tools • Suitable for hot and cold water services • Can be used on central heating systems and combi systems • Minimum operating temperature of 20°C • Maximum operating temperature of 105°C • 12 bar maximum operating pressure at minimum temperature • 3 bar maximum operating pressure at maximum temperature • 50-year manufacturer’s guarantee (T&Cs apply) • Manufactured to BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0222W Warranty (years) 50 Diameter (mm) 22 Pack Size 1 Fitting Type Tee Equal or Reducing Equal

Read more less

Need to securely connect three pipes of the same size? If you’re using the JG Speedfit push-fit system, you’ll need these equal tee connectors – they can be used with plastic or copper pipes, and it's a far faster way of connecting than using traditional methods. Installation is simple – you just push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. No tools are needed, which makes it far easier to manoeuvre in tight spaces or to readjust joins. Tool-free dismounting is equally straightforward, by unlocking the nut and pushing the collet towards the body of the fitting. Then, you just need to pull the pipe to release it. • Install or demount in seconds, without the need for tools • Suitable for hot and cold water services • Can be used on central heating systems and combi systems • Minimum operating temperature of 20°C • Maximum operating temperature of 105°C • 12 bar maximum operating pressure at minimum temperature • 3 bar maximum operating pressure at maximum temperature • 50-year manufacturer’s guarantee (T&Cs apply) • Manufactured to BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0215W Warranty (years) 50 Diameter (mm) 15 Pack Size 2 Fitting Type Tee Equal or Reducing Equal

Read more less

Need to securely connect three pipes of the same size? If you’re using the JG Speedfit push-fit system, you’ll need these equal tee connectors – they can be used with plastic or copper pipes, and it's a far faster way of connecting than using traditional methods. Installation is simple – you just push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. No tools are needed, which makes it far easier to manoeuvre in tight spaces or to readjust joins. Tool-free dismounting is equally straightforward, by unlocking the nut and pushing the collet towards the body of the fitting. Then, you just need to pull the pipe to release it. • Install or demount in seconds, without the need for tools • Suitable for hot and cold water services • Can be used on central heating systems and combi systems • Minimum operating temperature of 20°C • Maximum operating temperature of 105°C • 12 bar maximum operating pressure at minimum temperature • 3 bar maximum operating pressure at maximum temperature • 50-year manufacturer’s guarantee (T&Cs apply) • Manufactured to BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0215W Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type Tee Equal or Reducing Equal

Read more less

John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. • Suitable for hot and cold water services, central heating systems and combi systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM222222W Warranty (years) 50 Angle (°) 90 Diameter (mm) 22 Pack Size 1 Fitting Type Elbow Equal or Reducing Equal

Read more less

Connect equally-sized pipes to form a 90° pipe bend quickly and securely with this JG Speedfit 15mm elbow. It can be installed in seconds, and no tools are needed – simply push it fully onto the pipe and twist the plastic nut clockwise to lock in place. This Twist & Lock mechanism secures the fitting and adds compression too. At up to 40% faster to install than traditional methods, JG Speedfit equal elbow push-fit fittings are much easier to use in confined spaces as there’s no need for hot works or tools. Demounting the connection is equally easy. Just unlock the nut by hand and push the collet towards the body of the fitting, then pull the pipe to release. JG Speedfit blends push-fit and multi-seal technology for a reliable leak-proof connection. Suitable for use with plastic or copper pipe, you can create a truly flexible plumbing and heating system, and complete the job in no time. • Push-fit system is easy to use for faster installation times • Provides a secure and reliable leak-proof connection • Install or demount in seconds, without the need for tools • Suitable for hot and cold water services • Can be used on central heating systems and combi systems • Minimum operating temperature of 20°C • Maximum operating temperature of 105°C • 12 bar maximum operating pressure at minimum temperature • 3 bar maximum operating pressure at maximum temperature • 50-year guarantee • Manufactured to BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM01315W Warranty (years) 50 Angle (°) 90 Diameter (mm) 15 Pack Size 1 Fitting Type Elbow Equal or Reducing Equal

Read more less

Connect equally-sized pipes to form a 90° pipe bend quickly and securely with this JG Speedfit 15mm elbow. It can be installed in seconds, and no tools are needed – simply push it fully onto the pipe and twist the plastic nut clockwise to lock in place. This Twist & Lock mechanism secures the fitting and adds compression too. At up to 40% faster to install than traditional methods, JG Speedfit equal elbow push-fit fittings are much easier to use in confined spaces as there’s no need for hot works or tools. Demounting the connection is equally easy. Just unlock the nut by hand and push the collet towards the body of the fitting, then pull the pipe to release. JG Speedfit blends push-fit and multi-seal technology for a reliable leak-proof connection. Suitable for use with plastic or copper pipe, you can create a truly flexible plumbing and heating system, and complete the job in no time. • Push-fit system is easy to use for faster installation times • Provides a secure and reliable leak-proof connection • Install or demount in seconds, without the need for tools • Suitable for hot and cold water services • Can be used on central heating systems and combi systems • Minimum operating temperature of 20°C • Maximum operating temperature of 105°C • 12 bar maximum operating pressure at minimum temperature • 3 bar maximum operating pressure at maximum temperature • 50-year guarantee • Manufactured to BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM01315W Warranty (years) 50 Angle (°) 90 Diameter (mm) 15 Pack Size 2 Fitting Type Elbow Equal or Reducing Equal

Read more less

John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. • Suitable for hot and cold water services, central heating systems and combi systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM201510W Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type Coupler Equal or Reducing Reducing A Size 15mm B Size 10mm

Read more less

Choose this equal straight coupler to securely connect two pipes of the same size. Part of the JG Speedfit plastic push-fit system, the 22mm connector couldn’t be easier to use – simply push it fully onto the pipe, then twist the plastic nut clockwise to lock it in place. Up to 40% faster to install than traditional methods, the equal straight connector is also easier to use in tight spaces because there’s no need for hot works and tools. Demounting the connection is simple too – you just unlock the nut by hand, push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. The extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS, and are suitable for use with plastic or copper pipe. • Connects two 22mm pipes quickly and securely • Install or demount in seconds by hand • Easier to install in confined spaces – no hot works or tools required • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0422W Warranty (years) 50 Diameter (mm) 22 Pack Size 1 Fitting Type Coupler Equal or Reducing Equal

Read more less

Choose this equal straight coupler to securely connect two pipes of the same size. Part of the JG Speedfit plastic push-fit system, the 15mm connector couldn’t be easier to use – simply push it fully onto the pipe, then twist the plastic nut clockwise to lock it in place. Up to 40% faster to install than traditional methods, the equal straight connector is also easier to use in tight spaces because there’s no need for hot works and tools. Demounting the connection is simple too – you just unlock the nut by hand, push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. The extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS, and are suitable for use with plastic or copper pipe. • Connects two 15mm pipes quickly and securely • Install or demount in seconds by hand • Easier to install in confined spaces – no hot works or tools required • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0415W Warranty (years) 50 Diameter (mm) 15 Pack Size 2 Fitting Type Coupler Equal or Reducing Equal

Read more less

Choose this equal straight coupler to securely connect two pipes of the same size. Part of the JG Speedfit plastic push-fit system, the 15mm connector couldn’t be easier to use – simply push it fully onto the pipe, then twist the plastic nut clockwise to lock it in place. Up to 40% faster to install than traditional methods, the equal straight connector is also easier to use in tight spaces because there’s no need for hot works and tools. Demounting the connection is simple too – you just unlock the nut by hand, push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. The extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS, and are suitable for use with plastic or copper pipe. • Connects two 15mm pipes quickly and securely • Install or demount in seconds by hand • Easier to install in confined spaces – no hot works or tools required • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0415W Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type Coupler Equal or Reducing Equal

Read more less

John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certifiedSize : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM

Read more less

John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certifiedSize : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM

Read more less

John Guest stem elbow push-fit fitting connects two John Guest push-fit fittings to create a 90° swivel type connection. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing

Read more less

JG Speedfit cold water service stop tap MDPE x copper or PEX instantly shuts of water. Simply push the valve fully onto the pipe. To demount, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Simply push the JG Speedfit cold water service stop tap MDPE x copper or PEX fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only

Read more less

JG Speedfit cold water service stop tap MDPE x MDPE instantly shuts of water. Simply push the valve fully onto the pipe. To demount, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Simply push the JG Speedfit cold water service stop tap MDPE x MDPE fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only

Read more less

JG Speedfit cold water service stop tap MDPE x MDPE instantly shuts of water. Simply push the valve fully onto the pipe. To demount, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Simply push the JG Speedfit cold water service stop tap MDPE x MDPE fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only

Read more less

JG Speedfit cold water service stop end that quickly and easily caps off MDPE pipework at termination points on a temporary or permanent basis. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the JG Speedfit cold water service stop end fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only

Read more less

JG Speedfit wing back plate elbow push-fit fitting for the quick and secure installation of bib style taps. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit wing back plate elbow is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with MDPE pipes (inserts required) Suitable for cold water use only

Read more less

JG Speedfit cold water service back plate elbow to connect MDPE pipe forming a 90° bend. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service back plate elbow is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only

Read more less

JG Speedfit cold water service back plate elbow to connect MDPE pipe forming a 90° bend. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service back plate elbow is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only

Read more less

JG Speedfit cold water service PE-copper coupling for the connection of MDPE pipe. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service PE-copper coupling is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only

Read more less

JG Speedfit cold water service PE-copper coupling for the connection of MDPE pipe. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service PE-copper coupling is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only

Read more less