These Faithfull Hexagon Sockets are professional, high-quality 3/8in drive metric sockets forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Faithfull sockets have a hexagon design that gives an accurate fit on both nuts and bolts and the chamfered end allows easy nut location and entry.Size 11mm
These Faithfull Hexagon Sockets are professional, high quality metric sockets, forged from chrome vanadium steel which is hardened, tempered and satin chrome plated for corrosion protection. 1/2 inch square drive is the most popular drive size used in the UK and Ireland, due to its strength and durability. Faithfull sockets have a hexagon design that gives an accurate fit on both nuts and bolts and the chamfered end allows easy nut location and entry.The FAISOC129 Hexagon Socket has the following specifications: Drive: 1/2 inch square. Size: 9mm Hexagon.
Set of 3 Blue Spot 3/8in drive extension bars made from chrome vanadium steel which is heat treated for strength and durability. This 3 piece set contains the following lengths:75mm (3in).125mm (5in).255mm (10in).
The Bahco 8120-1/4 Swivel Head Ratchet has a 1/4in drive and 72 teeth that provide a 5° action angle. Its head swivels 270°, allowing it to reach difficult areas. In addition, the direction switch on the head is accessible from almost any angle. The ratchet is made from high-performance steel and has a micro matt finish. It has a quick-release function that allows easy socket change. Conforms to hardness and torque requirements, according to ISO 3315:2011.
The Bahco 8120-3/8 Swivel Head Ratchet has a 3/8in drive and 72 teeth that provide a 5° action angle. Its head swivels 270°, allowing it to reach difficult areas. In addition, the direction switch on the head is accessible from almost any angle. The ratchet is made from high-performance steel and has a micro matt finish. It has a quick-release function that allows easy socket change. Conforms to hardness and torque requirements, according to ISO 3315:2011.
The Bahco BWSS12P5 1/2in Drive Impact Wheel Socket Set contains a selection of the most popular sizes. The long length of these sockets enables easy access. Made from high-performance alloy steel, with plastic protection on socket walls to ensure protection of the rims, and plastic protection inside the socket to ensure protection of wheel nuts. They have a black phosphate finish with colour coded jackets for easy identification. Sizes: 17, 19, 21, 22 and 24mm
These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 8mm
This Blue Spot socket set contains 13 popular 3/8 inch square drive sockets which are made from chrome vanadium steel for strength and durability and which have a deep reach for better access. The set contains the following sizes:6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17 and 19mm. Supplied with a storage rack.
The Bahco SB7800SM Series Hex Sockets featuring a dynamic drive profile for higher efficiency and optimum grip. Manufactured from high-performance alloy steel with a highly polished finish. Not suitable for machine operation. 1/2in square drive.
The Bahco SB7800SM Series Hex Sockets featuring a dynamic drive profile for higher efficiency and optimum grip. Manufactured from high-performance alloy steel with a highly polished finish. Not suitable for machine operation. 1/2in square drive.
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM44025 Combination Spanner has the following specifications:Head size: 25mm.Length: 274mm.
These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 30mm
The Bahco SB7800SM Series Hex Sockets featuring a dynamic drive profile for higher efficiency and optimum grip. Manufactured from high-performance alloy steel with a highly polished finish. Not suitable for machine operation. 1/2in square drive.
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM44028 Combination Spanner has the following specifications:Head size: 28mm.Length: 305mm.
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM44020 Combination Spanner has the following specifications:Size: 20mm.Length: 224mm.
The Facom R.360PB 1/4in Square Drive Rotator Ratchet has an innovative twist handle, providing precision and comfort. The ratchet features a 60 tooth mechanism, a 6° working arc and an ergonomic soft-grip handle. The twist handle design allows the operator to work in the tightest of spaces, only having to move the wrist slightly to rotate the handle and the drive, rather than moving from the elbow, saving time, effort and money. The convenient drive direction switch allows use in both left and right directions and the ratchet secures sockets firmly in place until the quick release button is activated.
SBSF series sockets 3/8in, hexagon in metric and imperial sizes.DIN 3124 / ISO 2725. 1/2in 10 DIN 3120 / ISO 1174.Finish: nickel and matt chrome-plated.Material: VANADIUM-EXTRA.With dynamic-drive profile.Size: 16mm.
These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 34mm
These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 46mm
The Bahco SB7800SM Series Hex Sockets featuring a dynamic drive profile for higher efficiency and optimum grip. Manufactured from high-performance alloy steel with a highly polished finish. Not suitable for machine operation. 1/2in square drive.
The BlueSpot 1/4in Torque Wrench is manufactured from chrome vanadium steel for increased durability. Designed to be utilised where fixings are required to be tightened to a predetermined torque load. Please note that there is not a clickable noise when the desired torque has been met. Supplied with a useful storage case. Warning: All torque wrenches must be stored on the lowest torque setting to avoid a set in the spring. Failure to do so can result in a loss of accuracy over time. Specification: Torque Range: 2-24Nm
The Bahco S0810L 1/4in Drive Deep Socket Set contains a selection of sockets made from high-performance alloy steel with a matt finish. The Dynamic Drive™ profile protects the sockets from wear and damage. Supplied in an oil and temperature resistant polypropylene case. Contains: 10 x 1/4in Square Drive Deep Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13mm
The Bahco S330 1/4in & 3/8in Drive Socket Set contains sockets made from high performance alloy steel. With a Dynamic Drive™ profile to protect the sockets from wear and damage. Supplied in an oil and temperature resistant polypropylene case. Confroms to DIN 3120 / ISO 1174. Contains: 12 x 3/8in Hex Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 22mm1 x 3/8in 60 Teeth Quick Release Ratchet2 x 3/8in Extension Bars: 75mm (3in) & 150mm (6in).1 x 3/8in Universal Joint1 x 3/8in x 1/4in Bit Holder2 x 3/8in Spark Plug Sockets Hex: 16mm (5/8in) & 21mm (13/16in)1 x 1/4in Spinner Handle, 2-Component Handle1 x 1/4in x 1/4in Bit Holder3 x 1/4in Slotted Bits: 4, 5.5 & 7mm4 x 1/4in Phillips Bits: PH1, PH2, PH3 & PH46 x 1/4in Hex Bits: 3, 4, 5, 6, 7 & 8mm
The Bahco SL25 is a handy 1/4in drive socket set complete with 12 sockets made from hardened chrome vanadium, a bit set with a dynamic drive profile and a quick-release ratchet. Ideal for the home, garage or car, this Bahco SL25 socket set will give years of service as it is made from a hard-wearing steel material. The set has all the most common sized sockets, so the set is well equipped to tackle any job in or around the home. It is especially suitable for the motor trade. Supplied in a sturdy high density polythene carry case with sponged lining that is labelled with the corresponding items for quick and easy identification. Contains: 1 x 1/4in Reversible Quick-Release Ratchet12 x Hex Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 & 13mm2 x Phillips Bits: PH22 x Hex Bits: 5 and 6mm6 x TORX Bits: TX10, TX15, TX20, TX25, TX30 & TX401 x 1/4in Bit Holder 1 x 100mm Extension1 x Bahco SL25 Socket Set of 25 Metric 1/4in Drive
SBS20 series combination spanners manufactured from high grade chrome-vanadium steel for strength and tolerance.The small, flat heads and dynamic drive profile are designed for easy access in confined spaces.Open-end angle 15° , ring end 15° offset,DIN 3113 / ISO 3318 / ISO 7738.Size 9mm.Length 120mm.
The Bahco S103 103 piece socket & spanner set contains a variety of popular sizes in a handy carry case, with easy identification sizes printed on the tray. Contents: 17 x 1/2in Square Drive Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 24, 27, 30, 32 and 34mm. 6 x 1/2in Square Drive Deep Sockets: 10, 13, 16, 17, 18 and 19mm. 12 x 1/4in Square Drive Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11 and 13mm. 6 x 1/4in Square Drive Deep Sockets: 7, 8, 9, 10, 11, 12, and 13mm. 2 x 1/2in Spark Plug Sockets: 16 and 21mm. 3 x 1/4in Phillips Bits: PH1, PH2 and PH3. 3 x 1/4in Pozidriv Bits: PZ1, PZ2, and PZ3. 9 x 1/4in TORX Bits: 6, 8, 9, 10, 15, 20, 25, 30 and 40. 6 x 1/4in Hex Bits: 3, 4, 5, 6, 7 and 8. 3 x 5/16in TORX Bits: 45, 50 and 55. 2 x Bit Holder: 1/4 and 1/2in. 2 x Universal Joint: 1/4 and 1/2in. 3 x Extension Bar: 1/4in: 100mm, 1/2in: 125 and 250mm. 2 x Ratchet: 1/4in 150mm, 1/2in: 250mm. 2 x Screwdriver Reversible Ratchet: 1/4in: 150mm, 1/2in: 250mm. 1 x 1/4in Bit Ratchet. 1 x 1/4in Square Bit Adaptor. 1 x 1/4in Hex Magnetic Extension Bar. 13 x Metric Spanner: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm. 9 x Hex Keys: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10.
The BlueSpot Torque Angle Gauge is ideal for the tightening of fasteners once the torque load has been applied. The dial has been calibrated in increments of 2° and has an easy read face for increased precision. To set angle gauge simply insert the holding key into the housing and turn driver to required angle. Suitable for use with 1/2in drive ratchets and power bars.
The Bahco BLE301 Car Creeper is a low profile creeper with a high-density foam pad for higher resistance and good comfort. It has a pivotable header with 3 different positions, and a hanger. Its wheels are 75 by 25mm, and have full 360º movement. Capacity: 135kg.Height: 120mm.
The Bahco S18TORX 1/2in Drive Socket Set contains a selection of sockets made from high-performance alloy steel with a matt finish. The Dynamic Drive™ profile protects the sockets from wear and damage. Supplied in an oil and temperature resistant polypropylene case. Contains: 9 x Short TORX Bit 1/2in Sockets: TX20, TX25, TX27, TX30, TX40, TX45, TX50, TX55, TX60 9 x Long TORX Bit 1/2in Sockets: TX20, TX25, TX27, TX30, TX40, TX45, TX50, TX55, TX60
Blue Spot 01746 1/4, 3/8 and 1/2 in Drive metric and AF socket set 52 piece consisting of:-12 x 1/4 Hex sockets 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32 and 1/2 AF.13 x 1/4 Hex sockets 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10, 11, 12 and 13mm.3 x 1/4 8 Pt sockets 1/4, 5/16 and 3/8 in1 x 1/4 Spinner handle1 x 1/4 to 3/8 Adaptor1 x 1/4 Hex bit holder3 x 1/4 Hex Phillips screwdriver bits PH1, PH2 and PH3.2 x 1/4 Hex Slotted screwdriver 3/16 and 9/32 in.3 x 3/8 Hex sockets 7/16, 9/16 and 1/2 AF3 X 3/8 Hex sockets 11, 12 and 13mm 1 x 3/8 Reversible ratchet handle.1 x 3/8 Extension bar 3 in1 x 3/8 Spin disc1 x 3/8 Spark plug socket 13/16 in.4 x 1/2 Hex sockets 5/8, 11/16, 3/4 and 13/16 AF.1 x 1/2 Reversible ratchet handle 1 x Moulded case.
The Britool 1/2 inch drive 12-point long sockets (metric) are crafted from chrome vanadium steel with a high chrome finish. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO-1174-1, ISO-1711-1, ISO 691.The Britool BRIE117288B Long Reach 12 Point Socket 1/2 in drive 23mm has the following dimensions:Size: 23mmLength: 79mmWeight: 250g
These AF, imperial combination spanners are forged in chrome vanadium steel and have a high chrome finish. The ring spanner end has a 12-point OGV® profile angled at 15°, maximising the contact surface with the nut for a longer lifetime. The open end is angled at 15° from the handle axis.ISO 691 - ISO 1711-1 - ISO 3318 - ISO 7738 - DIN 3113.The Britool BRIE113358B Combination Spanner 3/4 inch has the following dimensions:Size: 3/4 AFLength: 230 mmWeight: 150g
This Faithfull Straight Pattern Tyre Lever is manufactured from hardened and tempered carbon steel for strength and reliability, and has a corrosion-resistant chrome plating. With hardened and rounded tapered tips for easy rim entry, it also features both a flat and hook end. Ideal for general automotive and agricultural use. Available in 4 lengths.This Tyre Lever is 18in in length.
The 1/4 inch drive long reach sockets (Length 49.5 mm) have a Hex socket (6 point) end and are crafted from chrome vanadium steel with a high chrome finish. The OGV profile allows for tightening torque to be applied to the sides rather than to the angles of the nut. These sockets are for manual use only. ISO2725-1, DIN 3124, ISO 1774-1, ISO 691, ISO 1711-1.Size: 12mm Length: 49.5mmWeight: 50g
