A professional, 3/8in drive, hexagonal, metric deep socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.Size: 19mm.Overall length. 56mm
This Teng Tools professional hexagonal 1/2in square drive socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and to reduce the risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.The TENM1205176 1/2inch square drive socket has the following specifications:Size: 17mm.Length: 38mm.
This Teng Tools socket is a professional 3/4 inch drive, metric hexagon socket. The socket is manufactured from chrome vanadium steel for strength and durability and has an attractive satin finish. The socket is produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners.The TENM340524 Hex 3/4 inch drive socket has the following specifications:Size: 24mm. Length: 51mm.
This Teng Tools Socket is a professional, 3/8 inch drive regular 6 point metric socket, produced in accordance with ISO 9000 and AS954 specifications. It provides excellent torque and reduces the risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety. The socket is manufactured from chrome vanadium steel with a satin finish.Size: 8mm.Overall length 25.7mm
These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 9mm
A professional bi-hexagon 1/2in square drive deep socket produced in accordance with ISO 900 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Length: 79mm.Size: 10mm.
This Teng Tools Wheel Wrench will help to make a tyre change as effortless as possible. The telescopic, 1/2inch drive wrench adjusts up to 530mm (21 inch) to add extra torque and leverage to removing tight wheel nuts. It is made from chrome vanadium steel for strength and durability. Supplied with a combined 17/19mm impact socket.
A double ended ring spanner designed, manufactured and tested in accordance with ISO 9002. Different size bi-hexagonal openings at each end. Double curved 75° high angle. Manufactured from chrome vanadium steel with a satin finish. DIN 838.Size 8 x 9mm.Length 183mm
A double ended ring spanner designed, manufactured and tested in accordance with ISO 9002. Different size bi-hexagonal openings at each end. Double curved 75° high angle. Manufactured from chrome vanadium steel with a satin finish. DIN 838.Size.12 x 13mm.Length. 217mm
A double ended ring spanner designed, manufactured and tested in accordance with ISO 9002. Different size bi-hexagonal openings at each end. Double curved 75° high angle. Manufactured from chrome vanadium steel with a satin finish. DIN 838.Size 6 x 7mm.Length 168mm
A double ended ring spanner designed, manufactured and tested in accordance with ISO 9002. Different size bi-hexagonal openings at each end. Double curved 75° high angle. Manufactured from chrome vanadium steel with a satin finish. DIN 838.Size. 16 x 17mm.Length. 260mm
This Teng Tools ratcheting combination spanner combines an open ended spanner with a 72-tooth 12-point ring ratchet. The ratchet has a 'flip reverse' feature, which switches the direction of the ratchet, and it is offset at a 13° angle for ease of access. Both ends are of the same size. The spanner is made from chrome vanadium steel for strength and durability, and has an attractive satin finish.The TEN600516R Ratchet Combination Spanner has the following specifications:Size: 16mm. Length: 208mm.
BlueSpot Flexible Ratchet Spanner with a 180 degree pivoting ratchet ring head. Manufactured from chrome vanadium steel. Heat-treated and nickel-plated for increased durability. Fully polished mirror finish. The 5 degree ratcheting increment makes it ideal for use in tight spaces. 72 teeth.1 x BlueSpot Tools 180 degree Flexible Head Ratchet Spanner 17mm.
The Bahco S4RM ratcheting spanners are made from top quality forged steel, nickel and chrome plated in a matt finish for a smooth and secure grip. Easy to use, these spanners simply grip the nut or bolt being removed or tightened, the ratcheting spanner heads are sized either side of each spanner for the desired size of nut or bolt, just push the direction lever to remove or tighten the nut or bolt with a ratchet action. They are an ideal option for motor mechanics, as these spanners can be used in awkward places and minimal movement is required to use them.1 x Bahco S4RM Series Reversible Ratchet Spanner 8/9/10/11mm
These Teng Tools Hex keys with T handles, each have a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees, and therefore improves access. The keys are manufactured from chrome vanadium steel for toughness and durability. This 7 piece set of Teng Tools hex keys comprises the following sizes: 3 x 100mm Hex Keys: 2.5, 3 & 4mm.3 x 150mm Hex Keys: 5, 6 & 7mm.1 x 190mm Hex Key: 8mm. The keys are supplied in a handy storage tray.
The STANLEY FatMax Anti-Slip Combination Wrench provides improved bolt contact, reducing the chance of slippage. Forged in corrosion-resistant chrome vanadium steel with a satin chrome finish for strength and durability. With a 12-point versatile box end for easy fitting over nuts and bolts. It also has a 15 degree offset open and box end offering improved access and torque.1 x STANLEY FatMax Anti-Slip Combination Wrench 16mm
Extension bars, sometimes called 'extender arms', allow access to nuts that are difficult to reach, typically in automotive applications. This Teng Tools extension bar has a 3/8 inch square drive. It is manufactured from chrome vanadium steel for strength and durability, and has a satin finish.Wobble extension barSize 75mm (3 in)
This 3/8 inch drive Torx (TX) socket bit is manufactured from chrome vanadium steel for strength and durability, with an attractive satin finish. The socket is conveniently marked with its size for easy identification. Complies with the latest DIN and ISO standards.The TENM381230T TX socket bit has the following specifications:Overall length: 49.5mm.Size: 5.5mm (TX30).
This Blue Spot socket set contains 12 popular 1/4in and 3/8in drive Torx sockets which are made from chrome vanadium steel for strength and durability. They are supplied on a handy storage rack. This set contains the following sizes:6 x 1/4in sockets: T10, T15, T20, T25, T30 and T40.6 x 3/8in sockets: T40, T45, T47, T50, T55 and T60.
This Teng Tools Torx keys with T handles, each have a short arm and a long arm. The short arm allows excellent leverage allowing easy tightening and loosening and also has a slot to work on tamperproof screws. The long arm allows access to more difficult to reach areas. The keys are made from Chrome Molybdenum alloy steel for extra strength. This 7 piece set of Torx keys for internal TX heads consists of the following sizes: 3 x 100mm TX/TPX keys (TX/TPX10, TX/TPX15 and TX/TPX20). 3 x 150mm TX/TPX keys (TX/TPX25, TX/TPX27 and TX/TPX30). 1 x 190mm TX/TPX key (TX/TPX40). Supplied in handy storage tray.
The Teng Tools 3 piece pry bar set is ideal for levering, positioning and aligning jobs. The bar's roll heads ensure excellent leverage, whilst their pointed taper end can be used for lining up. Supplied in storage tray. Contents: 1 x 12in Roll/Heel Bar.1 x 16in Roll/Heel Bar.1 x 20in Roll/Heel Bar. Specification Dimensions: 560 x 110 x 40mm.Weight: 1.6kg.
Teng Tools Impact Sockets are specifically designed for use with power tools. Manufactured in chrome molybdenum steel in accordance with GGG-W-6608, these sockets ensure the highest quality. Each socket is individually branded and size marked for quick identification, and meets ANSI standards for use in automotice applications. Supplied in a storage tray. Contents: 8 x Regular 6 Point Impact Sockets: 13, 15, 16, 17, 18, 19, 22 & 24mm.8 x Deep 6 Point Impact Sockets: 13, 15, 16, 17, 18, 19, 22 & 24mm. Specification Dimensions: 265 x 142 x 50mm.Weight: 2.2kg.
This Teng Tools socket is a professional bi-hexagon 3/4 inch drive socket. The socket is in imperial AF size, and is manufactured from chrome vanadium steel with a satin finish. The socket is produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners.The TENM340148 bi-hexagon 3/4 inch drive socket has the following specifications:AF Size: 1.1/2inch.Length: 60mm.
The Faithfull Professional high quality, forged from chrome vanadium steel are hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113. Broached jaws and rings to ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions. Contents: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,24,25,26,27,28, 30 and 32mm
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 15mmLength: 78mm
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 32mmLength: 78mm
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 16mmLength: 78mm
The Bahco SB7800SM Series Hex Sockets featuring a dynamic drive profile for higher efficiency and optimum grip. Manufactured from high-performance alloy steel with a highly polished finish. Not suitable for machine operation. 1/2in square drive.
These Faithfull Hexagon Sockets are professional, high-quality 3/8in drive metric sockets forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Faithfull sockets have a hexagon design that gives an accurate fit on both nuts and bolts and the chamfered end allows easy nut location and entry.The FAISOC3823 Hexagon Socket has the following specifications: Drive: 3/8 inch square. Size: 23mm Hexagon.
The STANLEY FatMax Anti-Slip Combination Wrench provides improved bolt contact, reducing the chance of slippage. Forged in corrosion-resistant chrome vanadium steel with a satin chrome finish for strength and durability. With a 12-point versatile box end for easy fitting over nuts and bolts. It also has a 15 degree offset open and box end offering improved access and torque.1 x STANLEY FatMax Anti-Slip Combination Wrench 13mm
The ITL Totally Insulated Open End Spanners offer maximum personal protection as the entire tool is insulated. They are made from injection moulded nylon 11 which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Totally Insulated Spanner. Size: 10mm.
With ratchet the torque wrench can be used for both tightening and final checking of the torque. Reversible with lever, but only for right hand action for torque checking. Equipped with angular gauge for after tightening.Satin finish and rubber handle.Graduated in Nm and ft.lb. with lockable setting.Accuracy : ± 4%.3/4 in. Square drive. Torque wrench according to DIN 3122.Range 90 to 450Nm / 50 to 340 ft.lb
The Bahco S4RM ratcheting spanners are made from top quality forged steel, nickel and chrome plated in a matt finish for a smooth and secure grip. Easy to use, these spanners simply grip the nut or bolt being removed or tightened, the ratcheting spanner heads are sized either side of each spanner for the desired size of nut or bolt, just push the direction lever to remove or tighten the nut or bolt with a ratchet action. They are an ideal option for motor mechanics, as these spanners can be used in awkward places and minimal movement is required to use them.This Bahco Reversible Ratchet Spanner Set comprises of 3 spanners covering 12 sizes. Supplied in a fabric carry case with belt loop for easy transportation and storage. Sizes: 8 x 9 x 10 x 11mm, 12 x 13 x 14 x 15mm and 16 x 17 x 18 x 19mm.
