A professional, 3/8in drive, hexagonal, metric deep socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.Size: 14mm.Overall Length 50mm
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 10mm
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM44011 Combination Spanner has the following specifications:Size 11mm.Length: 155mm.
This Teng Tools Socket is a professional, 3/8 inch drive regular 6 point metric socket, produced in accordance with ISO 9000 and AS954 specifications. It provides excellent torque and reduces the risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety. The socket is manufactured from chrome vanadium steel with a satin finish.Size: 11mm.Overall length 25.7mm
These Facom 12-point OGV sockets have a 3/8 inch drive to fit 3/8 inch ratchets. The sockets are long-reach, and their OGV profile allows tightening torque to be applied to the sides, rather than to the angles of the nut/bolt. They are an excellent choice for tightening/loosening harder to reach nuts, bolts and other fasteners. Available in a range of different metric sizes. Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMJ16LA Deep Socket has the following specifications:Socket size: 16.0mm.Length: 60mm.
The Britool E117377B Ratchet combination spanners have a 5° ratcheting head and a 12-point OGV® ring end, which is angled at 15° from the handle axis (increment angle 30°). The OGV® Ring profile maximises contact surface with the nut for a longer lifetime.The switch to change ratcheting direction built into the handle prevents accidental change.Forged from Chrome Vanadium steel with a high chrome finish. ISO 691 - ISO 1711-1.The Britool BRIE113309B Ratcheting Spanner 17mm has the following dimensions:Size: 17mmLength: 232mmWeight: 182g
The Norbar 16mm Spigot Spanner Open End Imperial Fittings are designed to suit Norbar 16mm diameter spigot ended torque handles. They are made from forged alloy steel and the ends are easily interchangeable. The torque handle can be calibrated to give correct torque at nut/bolt.Norbar 16mm Spigot Spanner Open End Fitting Specifications: Size: 1/2in A/F.Operates Between: 0.0-48.0Nm.
A professional matt chromed 1/4 square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners.This hexagonal socket has a relatively short depth and a stepped collar on the shank.Overall length 21.2mmSize. 5/16 in AF
The Bahco SB7800SM Series Hex Sockets featuring a dynamic drive profile for higher efficiency and optimum grip. Manufactured from high-performance alloy steel with a highly polished finish. Not suitable for machine operation. 1/2in square drive.
The Bahco S18HEX 1/2in Drive Socket Set contains a selection of sockets made from high-performance alloy steel with a matt finish. The Dynamic Drive™ profile protects the sockets from wear and damage. Supplied in an oil and temperature resistant polypropylene case. Contains: 9 x Short Hex Ball Bit 1/2in Sockets: 4, 5, 6, 7, 8, 10, 12, 14, 17mm 9 x Long Hex Ball Bit 1/2in Sockets: 4, 5, 6, 7, 8, 10, 12, 14, 17mm
SBSF series sockets 3/8in, hexagon in metric and imperial sizes.DIN 3124 / ISO 2725. 1/2in 10 DIN 3120 / ISO 1174.Finish: nickel and matt chrome-plated.Material: VANADIUM-EXTRA.With dynamic-drive profile.Size: 19mm.
Blue Spot 01526 1/2 in Drive metric socket set 10 piece consisting of:-10 x 1/2 Sockets 10, 11, 12, 13, 14, 15, 17, 19, 22 and 24mm.The chrome vanadium sockets are mounted on a steel rail for quick and easy identification.
This Teng Tools ratcheting combination spanner combines an open ended spanner with a 72-tooth 12-point ring ratchet. The ratchet has a 'flip reverse' feature, which switches the direction of the ratchet, and it is offset at a 13° angle for ease of access. Both ends are of the same size. The spanner is made from chrome vanadium steel for strength and durability, and has an attractive satin finish.The TEN600513R Ratchet Combination Spanner 13mmSize: 13mm.Length: 178mm.
Torque wrench with flip reverse ratchet action, and Nm and ft.lb reference scales. Manufactured to conform to BS 6703/88. The unique angular gauge, for use after tightening stretch bolts, allows bolts to be tightened over and above a pre-set torque rating by so many degrees, e.g. 45° . Both the torque and angular gauge can be set with the one tool.Also suitable for 1/4 in square drive sockets if used in conjunction with 3/8 female/ 1/4 male adaptor (380035).Supplied in robust oil resistant case.3/8in square drive.Range 5 to 25 Nm / 4 to 18 ft.lb
A professional bi-hexagon 1/2in square drive deep socket produced in accordance with ISO 900 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Length: 79mm.Size: 24mm.
The Bahco SB7800SM Series Hex Sockets featuring a dynamic drive profile for higher efficiency and optimum grip. Manufactured from high-performance alloy steel with a highly polished finish. Not suitable for machine operation. 1/2in square drive.
The Norbar Professional Torque Wrench Models 650 – 1500 are highly accurate up to a reading of ±3%. The wrenches are non- length dependent. An extension handle can be used to reduce operator effort (handle supplied as standard with Model 1000 and 1500). The wrenches are easy to use; a positive ‘click’ can be heard, seen and felt, helping to prevent over torqueing. Have a long scale where the length is shown in Nm and lbf.ft. The fine 60 tooth ratchet allows the wrench to be used in confined areas. Supplied with a declaration of conformance to satisfy the requirements of BS6789:2017 and a carry case for storage and protection.Model 1000 Torque Wrench Specification Drive: 3/4in Square.Range: 300-1,000Nm (220-750 lbf.ft).Torque Radius: 1098mm.Ratchet Teeth: 60.Ratchet Type: Push-Through.Length: 1250mm.Length (inc. Ext. Handle): 1750mm.Weight: 5.8kg.
This Teng Steel Ratchet is manufactured from chrome vanadium steel for optimum durability. It is ideal for use in confined spaces, with 72 teeth and 5° increments. Several teeth are engaged simultaneously, which means that a greater force can be used without risk of damage. The ratchet has an improved reverse switch, allowing quick and easy direction change - even with gloves on. The ratchet head is sealed, which prevents dirt and dust entering the mechanism, giving longer life and trouble-free use. The button for quick socket release is level with the ratchet head, which prevents accidental button activation and the loss of the socket. The ergonomic two-component handle provides a firm grip. The ratchet is of very high quality, and can handle torque that exceeds DIN 3112 standards. Specifications: Drive: 3/8 inch.No. of teeth: 72.Length: 203mm.
The Bahco BMD150 Magnetic Parts Tray is a circular magnetic parts tray with rubber coated magnets for surface protection, and is made from mirror finished stainless steel. It has a protruding plastic lip which means no flat spot is required, and therefore can also store non-magnetic items securely. It can be used as a hanger to easily transport bits from one place to another.
The Britool E117377B Ratchet combination spanners have a 5° ratcheting head and a 12-point OGV® ring end, which is angled at 15° from the handle axis (increment angle 30°). The OGV® Ring profile maximises contact surface with the nut for a longer lifetime.The switch to change ratcheting direction built into the handle prevents accidental change.Forged from Chrome Vanadium steel with a high chrome finish. ISO 691 - ISO 1711-1.The Britool BRIE117372B Ratcheting Spanner 24mm has the following dimensions:Size: 24mmLength: 325mmWeight: 710g
The Britool 1/2 inch drive 12-point sockets (metric) are crafted from chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1, ISO 691.The Britool BRIE117055B Socket 12 Point Standard 1/2 inch Drive 12mm has the following dimensions:Size: 12mmLength: 38mmWeight: 50g
Bahco S290 29 piece socket set 1/4in square drive. DIN 3120 / ISO 1174 Material: chrome vanadium. Plastic case: oil and temperature resistant polypropene.Contents: 29-pieces. 1 each 1/4in 6-point dynamic drive sockets - 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 and 13mm.1 each 1/4in bit sockets Phillips 1, 2, 3.1 each 1/4in bit sockets Flat 4, 5.5, 7mm.1 each 1/4in bit sockets Hex 3, 4 , 5 , 6 , 8mm.1 x 1/4in extension bar 2in. 1 x 1/4in extension bar 6in. 1 x 1/4in sliding T-bar.1 x 1/4in universal joint.1 x 1/4in spinner handle.1 x ratchet handle 45-teeth.
This Teng Tools ratcheting combination spanner combines an open ended spanner with a 72-tooth 12-point ring ratchet. The ratchet has a 'flip reverse' feature, which switches the direction of the ratchet, and it is offset at a 13° angle for ease of access. Both ends are of the same size. The spanner is made from chrome vanadium steel for strength and durability, and has an attractive satin finish.1 x TEN600519R Ratchet Combination Spanner has the following specifications:Size: 19mm. Length: 248mm.
This Teng Tools ratcheting combination spanner combines an open ended spanner with a 72-tooth 12-point ring ratchet. The ratchet has a 'flip reverse' feature, which switches the direction of the ratchet, and it is offset at a 13° angle for ease of access. Both ends are of the same size. The spanner is made from chrome vanadium steel for strength and durability, and has an attractive satin finish.The TEN600510R Ratchet Combination Spanner has the following specifications:Size: 10mm.Length 159mm.
