JG Speedfit brass female coupler for connecting metric pipe using a female thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass female coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable female thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable male thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable male thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable male thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable male thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable male thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
A durable brass adaptor for connecting Metric to FBSP type fittings
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Features and benefits
Instant push-fit connection and durable male thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable male thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass female cylinder adaptor push-fit fitting that connects pipe to a female thread hot cylinder. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass female cylinder adaptor push-fit fitting that connects pipe to a female thread hot cylinder. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass male cylinder adaptor push-fit fitting that connects pipe to a male thread hot cylinder. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass female cylinder adaptor push-fit fitting that connects pipe to a female thread hot cylinder. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass drain cock is used to drain water from a central heating system. Designed, manufactured and assembled in the UK.
Durable DZR brass body
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for central heating systems only
JG Speedfit brass drain cock is used to drain water from a central heating system. Designed, manufactured and assembled in the UK. Durable DZR brass body Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for central heating systems only
JG Speedfit brass drain cock is used to drain water from a central heating system. Designed, manufactured and assembled in the UK.
Durable DZR brass body
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for central heating systems only
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Brass Nickel Plated push-fit manifold Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Indices included Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating systems)Pack of 2
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass female stem adaptor that converts Speedfit push-fit to a female thread appliance.
The JG Speedfit brass female stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass female stem adaptor that converts Speedfit push-fit to a female thread appliance.
The JG Speedfit brass female stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male stem adaptor that converts Speedfit push-fit to a male thread appliance.
The JG Speedfit brass male stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Quickly and easily connects two John Guest fittings to create a swivel type connection.
John Guest brass male straight adaptor (BSPT thread) push-fit fitting adapts a push-fit connection to an imperial thread type connection. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in brass, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Features and benefits
Brass fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
Quickly and easily connects two John Guest fittings to create a swivel type connection.
John Guest brass male straight adaptor (BSP thread) push-fit fitting adapts a push-fit connection to an imperial thread type connection. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in brass, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Features and benefits
Brass fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
