JG Speedfit brass drain cock is used to drain water from a central heating system. Designed, manufactured and assembled in the UK.
Durable DZR brass body
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for central heating systems only
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Brass Nickel Plated push-fit manifold Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Indices included Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating systems)Pack of 2
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass female stem adaptor that converts Speedfit push-fit to a female thread appliance.
The JG Speedfit brass female stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male stem adaptor that converts Speedfit push-fit to a male thread appliance.
The JG Speedfit brass male stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Quickly and easily connects two John Guest fittings to create a swivel type connection.
John Guest brass male straight adaptor (BSP thread) push-fit fitting adapts a push-fit connection to an imperial thread type connection. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in brass, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Features and benefits
Brass fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
JG Speedfit brass stop valve for shutting off the flow of water to an entire system in the event of an emergency or for maintenance work. To install, simply push the pipe fully on to the valve. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass stop valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Hands screw mains stop valve
Durable DZR brass body
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for central heating systems only
JG Speedfit bulkhead elbow push-fit fitting that is primarily used for the modular bathroom ‘Pod’ market. The bulkhead allows connections to fixtures, through partitions. Simply push the push-fit fitting fully onto plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit bulkhead elbow push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for cold water use only
JG Speedfit ball valve (chrome plated) for connecting plastic or copper pipe. Using an easy to operate handle, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit ball valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit service valve with integrated isolation handle
Durable brass chrome plated body
Red and blue indices for easy identification of water supply
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit ball valve (chrome plated) for connecting plastic or copper pipe. Using an easy to operate handle, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Durable brass chrome plated body Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit ball valve (chrome plated) for connecting plastic or copper pipe. Using an easy to operate handle, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Durable brass chrome plated body Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass service valve with tap connectors (chrome plated) for connecting fixtures to pipework. Using a tamperproof 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe and hand-tighten the nut on to a side entry tap, toilet or male thread. To demount the push-fit connection end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit brass service valve with tap connectors (chrome plated) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Push-fit service valve and hand-tighten tap connector
Durable brass chrome plated body
1/4 turn isolation screwdriver slot
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass service valve with tap connectors (chrome plated) for connecting fixtures to pipework. Using a tamperproof 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe and hand-tighten the nut on to a side entry tap, toilet or male thread. To demount the push-fit connection end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit brass service valve with tap connectors (chrome plated) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Push-fit service valve and hand-tighten tap connector Durable brass chrome plated body 1/4 turn isolation screwdriver slot Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass service valve with tap connectors (chrome plated) for connecting fixtures to pipework. Using a tamperproof 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe and hand-tighten the nut on to a side entry tap, toilet or male thread. To demount the push-fit connection end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit brass service valve with tap connectors (chrome plated) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Push-fit service valve and hand-tighten tap connector Durable brass chrome plated body 1/4 turn isolation screwdriver slot Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
DZR brass body with a chrome plate is ideal for surface mounted pipework
Instant push-fit service valve with 1/4 turn isolation screwdriver slot
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 10
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 2
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 5
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 10
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 5
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK.
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
Suitable for hot and cold water and heating applications
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe Suitable for hot and cold water and heating applications Pack of 10
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe Suitable for hot and cold water and heating applications Pack of 2
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe Suitable for hot and cold water and heating applications Pack of 5
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK.
Compatible with plastic or copper pipe
Suitable for hot and cold water and heating applications
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Compatible with plastic or copper pipe Suitable for hot and cold water and heating applicationsPack of 10
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Compatible with plastic or copper pipe Suitable for hot and cold water and heating applicationsPack of 2
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Compatible with plastic or copper pipe Suitable for hot and cold water and heating applicationsPack of 5
Peace of mind protection from accidental pipe disconnection
JG Speedfit collet cover prevents the accidental removal or tampering with piping. The pipe can be inserted with the collet cover already attached to the push-fit fitting or the cover can slide into position afterwards. Designed, manufactured and assembled in the UK.
Features and benefits
Colour coded for easy identification of supply type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
Application
Hot and cold water and central heating systems
Purpose
Peace of mind protection from accidental pipe disconnection
Peace of mind protection from accidental pipe disconnection
JG Speedfit collet cover prevents the accidental removal or tampering with piping. The pipe can be inserted with the collet cover already attached to the push-fit fitting or the cover can slide into position afterwards. Designed, manufactured and assembled in the UK.
Features and benefits
Colour coded for easy identification of supply type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
JG Speedfit collet cover prevents the accidental removal or tampering with piping. The pipe can be inserted with the collet cover already attached to the push-fit fitting or the cover can slide into position afterwards. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of supply type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
JG Speedfit collet cover prevents the accidental removal or tampering with piping. The pipe can be inserted with the collet cover already attached to the push-fit fitting or the cover can slide into position afterwards. Designed, manufactured and assembled in the UK. Colour coded for easy identification of supply type For use with Speedfit fittings Suitable for hot and cold water and central heating systems
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK. Colour coded for easy identification of service type For use with Speedfit fittings Suitable for hot and cold water and central heating systems
