Monument Handy Plunger for clearing small basins, bath and shower wastes. Exclusive patented bellows design allows more cubic centimetre displacement than traditional force cups. Size: 100mm (4in).Length: 325mm (13in).
Monument Master Plunger for removing blockages from pipes by building up pressure. With patented bellows to give more displacement than traditional force cups. Easily cleaned and has a removable handle.This plunger is ideal for bath and sink waste pipes. Size: 125mm (5 in).
Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.1 x Monument 1458T Large Force Cup Plunger 120mm (4.3/4in)
Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.1 x Monument 1456N Small Force Cup Plunger 75mm (3in)
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument 1378Z Drain Testing Plug. Size: 100 mm (4 in).Capable of sealing against pressures of up to 1.97 bar / 29 psi.
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 24 x 26mmLength 125mm (5 in)
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 24 x 25mm Length 150mm (6 in)
The Moore & Wright 966 Series Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in a case.The 1966M/50 Traditional External Micrometer has the following specification: Micrometer Range: 25-50mm.Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.Resolution: 0.01mm.
The Lufkin Unilok Pocket Tape has a yellow clad abrasion resistant blade with 2 colour, easy to read markings in metric and imperial graduations. With a self-adjusting end hook. It has a lightweight high strength case with removable belt clip and a toggle lock that holds the blade securely at any length. Built-in shock absorber cushions blade return.This Lufkin YU835CME Unilok Pocket Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 19mmAccuracy: EC Class II
The Lessmann Brake Caliper Brush, manufactured for the automobile industry and used for the cleaning of clogged lining deposits when changing brake pad linings. The brush is thin with two rows of straight wire filling and is manufactured this way to prevent damage to sensitive brake areas during use. Available in Steel or Brass. Length: 225mm (9in). 182.401: Straight Steel, Gauge: 0.35.182.451: Crimped Brass, Gauge: 0.25.The Lessmann Brake Caliper Brush has the following specification: Type: Steel Straight, Gauge: 0.35.Length: 225mm (9in).
The Knipex 03 01 series traditional combination pliers are equipped with hardened cutting edges for hard or soft wire up to 2.5mm diameter. The pliers have all the signs of Knipex technology and quality. The oil hardened and tempered construction will give these pliers a longer working life. Knipex 03 01 series combination pliers have separately induction hardened cutting edges that are hardened to approximately 60HRc. They have polished heads and PVC dipped handles. These Knipex pliers have gripping zones for flat and round material. This gives the pliers added grip and makes them ideal for home use, DIY or trade applications. They come in 160, 180 and 200mm versions.These Knipex Combination Pliers ;have the following specification: Length: 160mm (6.1/4in).Cutting Capacity: Hard: 2.0mm, Medium Hard: 3.1mm, Multi-Strand: 9.0mm.
The IRWIN Jack 880UN Universal Toolbox Saw has all the features and benefits of a standard Jack 880, with the convenience of a 14in 'short' blade. The saw is fitted with a high quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing four times the added protection than conventional anti-rust agents. The handle has integrated 90° and 45° angles to aid the user when marking out. Blade Length: 350mm (14 inch).Teeth: 8 tpi.
Irwin Pullsaw Dovetail Saw is designed to cut on the pull stroke. The thin blade and the teeth setting offer a cleaner cut and superb finish. The dovetail saw is suitable for flush cutting and fine, detail cutting. Blade Length: 185mm (7.1/4in).Teeth: 22 tpi.
Gorilla Tubs are flexible, which is the key to the millions of jobs they can perform. They are great for mixing small batches of plaster and mortar; if the mix dries, a few kicks to the flexible body will remove the muck easily. They can be carried with both handles in one hand, shaped for pouring, pressed flat to the floor for scooping, pushed flat against a wall for scraping wallpaper into, catching leaks and so on. Gorilla Tubs are extremely durable and long lasting. The handles have been EU tested and have a working weight of 100 kilos (220 lb), so really heavy loads can be carried between two people. Gorilla Tubs can be used as tool bags, water tubs, rubble removers, roofing, scaffold knuckles, collecting bits, broken glass carrier etc. Features:Infinitely Versatile.Super Flexible.Frost proof.UV Sunlight Proof.Handles CE Tested.Reinforced in key areas for durability.Ribbed profile for strength.The GORTUB14BLK Gorilla Tub Small Size 14 Litre (3 gal) has the following dimensions: Height: 23cm.Diameter: 32cm.Colour: Black.
Fisher steel rule with satin chrome finish and photo etched markings, subdivided in mm, and 10th, 16th, 20th, 32nd, 64th.Figured 10mm, Inches. Double sided except the 2m/72in which is single sided.Size 150mm (6 in)Width 15mm.English and metric markings
High quality, heavy-duty roofing square suitable for both the DIY enthusiast and the craftsman. Stamped with Imperial graduations on one face and metric on the other. Made from steel. Size: 400 x 600mm (16 x 24in).
The Faithfull 4-Way Services Utility Meter Key is made from chrome vanadium steel for strength and durability. It features four popular key shapes: square, triangular and two-way. Suitable for use on radiator taps, gas and electricity meter doors. An essential item for many tradesmen.
Faithfull TORX (Star) Screwdrivers are manufactured from high-quality, correctly hardened and tempered S2 steel. With precision machined tips to provide an optimum fit helping to prevent cam-out and screw stripping. The tips are magnetised to aid screw retention with a black phosphate finish to help provide a long working life. Each screwdriver features a full size bi-material, textured non-slip, soft grip handle for maximum user comfort and ease of use, with a drive icon displayed on the end for easy identification. Contains one of each size, all 100mm long: TX10, TX15, TX20, TX25 & TX30.
Faithfull Phillips tip screwdrivers with high quality, correctly hardened and tempered Chrome Vanadium steel blades. Black phosphate tips provide a long working life and are magnetised for screw retention. The screwdrivers have full size bi-material soft-grip handles for maximising user comfort and firm non-slip gripping. Each handle is coded with a drive icon displayed on the end for easy identification.Type - PhillipsTip - PH 1 Length - 75mm (3 in)
This Faithfull Instrument Precision Screwdriver Set is ideal for watchmakers, model makers, instrument technicians, opticians. electrical and precision engineering shops and many other applications where fine adjustment, along with speedy removal and setting of fixings is required. The revolving body to permits single-handed use while leaving the other hand free when working on small items. The mini set consists of seven precision soft-grip screwdrivers designed for use on small screws. Each screwdriver features a chrome vanadium steel blade with a black tip. The set comprises: 2 x Slotted: 2.5 x 50mm, 3 x 50mm.2 x Phillips: PH00 x 50mm PH0 x 50mm.3 x Torx Star: TX8, TX9, TX10.
3 Piece Faithfull Pliers Set with the most popular selling pliers for everyday use. Manufactured from chrome vanadium steel and fitted with soft grip, non-slip handles for safety and comfort. These pliers meet tough GS standards and are suitable for both the trade and home user. Contents: 1 x Handyman Combination Pliers 180mm (7in), designed to grip and cut. The front section of the serrated jaws are ideal for gripping flat surfaces and the serrated sections match the profiles of rods, pipes and tubing. The induction hardened jaws are suitable for cutting a wide range of materials including medium and medium-hard wire. 1 x Handyman Diagonal Cutting Pliers 160mm (6.1/4in), for cutting medium to medium-hard wire close to the flat surface. The tapered head profile is ideal for accessing confined spaces. Induction hardened jaws and cutting edges are individually processed for maximum performance. 1 x Handyman Long Nose Pliers 165mm (6.1/2in), with serrated jaws to maximise grip and tapered to a fine end for accessing and the manoeuvre of small objects in confined spaces.
Combination oilstone made from aluminium oxide with one medium face and one coarse face. Can be used either dry or with a light oil. Size: 200 x 50 x 25mm (8 x 2 x 1in) Grade: Medium / Coarse
Faithfull Mitre Box made from high-impact polystyrene plastic. It is ideal for use with a tenon saw when cutting mitred or straight joints. This box features 22.5°, 45° and 90° guide slots for multi-angled cuts and a 45° compound cut slot. Two cam locking pegs are included for secure clamping of the workpiece. A bench edge stop on one side of the base prevents movement whilst sawing. Countersunk fastening holes allow the mitre box to be secured to a workbench for extra stability. Specification: Max. Workpiece Depth: 75mmMax. Workpiece Width: 120mmOverall Size: 310 x 170 x 100mm
Faithfull Professional quality key made from fully hardened chrome vanadium steel. All keys from 4mm/ 5/32in have chamfered edges to prevent damage to blade and fittings. All keys 3mm/1/8in and above are marked with their size.Size.12.0mm.
