A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 8mm
The Faithfull Bradawls are used to make pilot holes for screws in wood. Available in two versions - one with a tapered square tip (also known as a birdcage awl) for faster penetration of wood, and one with a traditional chisel tip. Fitted with comfortable soft-grip handles.The FAIBRADSQ Bradawl has a tapered square tip. Using a push and twist action, the square shape continuously reams the hole instead of pushing and reaming like a chisel tip bradawl. Blade Length: 50mmBlade Diameter: 3mm
The Bulldog Insulated Treaded General Service Shovel is the perfect tool for any contractor in need of a reliable and heavy duty shovel. The shovel is forged from one piece of steel with an epoxy paint coating to provide optimum protection against corrosive substances, and the round corner blades reduce penetration damage to underground pipes and cables. The treads enable you to use more force and it also acts as boot protection. Fitted with a one piece, heavy-duty fibreglass YD handle. Manufactured to BS8020. Individually tested to 10,000 volts, guaranteed to 1,000 volts, and supplied with a Certificate of Conformity.
The Bulldog Snow Shovel is the perfect tool for scooping up snow in winter and leaves in autumn. It has a strong, plastic D-handle and a lightweight aluminium shaft with soft grip, to ensure comfort even in cold weather. The wide, tough plastic moulded blade features a metal edge for breaking and scraping ice. Specification: Length (Handle to Blade Tip): 135cmBlade Size: 31.5 x 45.5cmScoop Depth: 12cm
Marshalltown M192 cement edger designed to give a good finish on steps and verges. Stainless steel blade with sturdy mountings. Light and easy to handle with comfortable DuraSoft® handle. Size: 250 x 100mm (10 x 4in).Straight Ends with 10mm (3/8 in) Radius.
IRWIN Record Medium-Duty Forged G Clamp are a drop forged steel clamp and the slim section permits use in situations where space is limited. Particularly useful for the craftsman with smaller work, the boat builder and the handyman. Have a blue stove enamelled finish. Come in the following sizes: REC1192: 50mm.REC1193: 75mm.REC1194: 100mm.REC1196: 150mm.IRWIN Record Medium-Duty Forged G Clamp Size: 152mm (6 in)
The STANLEY Hobby Stripping Knife with a mirror polished steel blade attached to a yellow polypropylene handle. For stripping wallpaper. Specification: Size: 75mm (3in).
The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - PozidrivTip Size PZ.2Blade Length 30mm (1 3/16 in)
Faithfull Short blade butt chisels are ideal for precise cutting and paring of joints or for use where access is limited. These chisels feature 110mm long drop forged Chrome Vanadium steel blades with accurately ground bevels. Virtually unbreakable softgrip Polypropylene handles with steel striking caps. The short length bevel edge blade is ideal for cutting into tight corners.Set of 4 Butt Chisels. 12, 18, 25 & 32mm
This Norbar Industrial Torque Wrench has the following specification: Drive: 3/4in SquareRange: 200-800Nm (150-600 lbf·ft)Ratchet Type: Push ThroughLength: 1,214mmWeight: 6.65kg
These IRWIN Gilbow straight cutting snips have accurately ground edges that ensure the material being cut does not slip out of the jaws and become damaged.The hollow ground jaw faces provide a longer life to the cutting edge. Gilbow tin snips are jointed with a nut and bolt design essential in ensuring the longest possible life of the joint, whilst keeping a good easy smooth cutting movement.Irwin Gilbow snips and shears have a great cutting capability which is much greater than the strength of the user and will provide a good, clean, easy cut edge to any workpiece.The original Gilbow cutting snips were first designed many years ago, and have dominated the sheet metal cutting industry to such an extent that today, snips and shears are referred to as 'Gilbows'.Length: 250mm (10in).
The Faithfull Welded Bucket Trowel has a tapered blade that has been cut square and is designed for removing mortar from the sides and bottom of buckets.The handle is made of a soft grip material which provides a better hold and increased comfort. Size: 180mm (7in).Taper Width: 106mm - 88mm (4.1/4in-3.1/2in).
Irwin Hacksaw Frame 300mm (12 in) is aimed at meeting the demands of professional users. Mushroom pins prevent the blade from being released when the saw is dropped. The ergonomically shaped handle ensures a comfortable grip and the 90° and 180° blade setting options are a handy facility. The I-125 is able to to reach over 125kg blade tension to ensure accurate cutting. Blade Length: 300mm (12 in).
Everbuild EuroScrim is a premium quality scrim tape which is quick and easy to apply. It is self adhesive and has a high tack adhesive and an open mesh that will not blister or bubble. Ideal for creating perfect joints everytime.Size: 100mm x 90m.
The Markal Dura-Ink 20 Fine Bullet Tip is a retractable permanent ink marker, which uses a one-handed operation, push-button for easy activation on the job site. Wear-resistant ink formula, and formulated to dry quickly and leave bold, highly-visible marks. The wear-resistant ink is safe for use on almost any surface and is water-resistant. Supplied in a display pack, 24 pieces. Mark Size: 1.5mm (1/16in).
The Moore & Wright 401 Series Dial Indicator has an aluminium body and a tungsten carbide measuring tip. It has an adjustable bezel with stop screw and features tolerance indicators. Manufactured to ANSI B89.1.10 standard. Specifications:Range: 0-0.5in.Resolution: 0.001in.Bezel diameter: 58mm.
The ITL 5 Piece Insulated Nut Spinner Set. All the nut spinners are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation. Supplied in a tool roll, contains: 5 xNut Spinners: 0BA, 2BA, 4BA, 6BA, 8BA.
Engineered for clean, controlled removal of skirting boards, architraves and decorative trim, the Roughneck Skirting & Trim Puller delivers the leverage, durability and precision needed for refurbishment and restoration work.The integrated self‑prying wedge is designed to slide behind trim with minimal surface damage, providing steady, progressive lifting without crushing or splitting the material. Chamfered edges help the tool penetrate tight gaps more easily, improving access and reducing the risk of marking surrounding surfaces.A built‑in nail remover adds practical versatility, allowing fasteners to be extracted cleanly once the trim is released. Constructed from heavy‑duty steel, the tool offers exceptional strength and long‑term reliability, standing up to repeated prying and demanding worksite conditions.A tough, dependable puller built for professionals who need clean, efficient trim removal with maximum control.Size: 280mm/11in
Engineered for demanding renovation and floor lifting tasks, the heavy-duty, professional grade, Roughneck Flooring & Trim Remover delivers the power, control and versatility needed to remove a wide range of floor coverings and trim.The self‑prying wedge is designed to drive cleanly beneath flooring and edging materials, providing steady, progressive lifting. Its chamfered edge helps the tool slip into tight gaps and stubborn seams, improving access across wood flooring, carpet tiles, vinyl flooring, ceramic tiles and more. This makes it a highly adaptable tool capable of working efficiently on just about any surface.A metal end cap built into the handle allows the tool to be struck with a hammer, delivering additional impact when breaking adhesive bonds or lifting particularly resistant sections. Constructed with heavy‑duty materials, it offers long‑term durability and dependable performance under tough worksite conditions.A rugged, multi‑purpose lifter and scraping tool designed for fast, controlled removal of flooring, tiles and trim during renovation and refurbishment work.
The Roughneck Ball Pein Hammer offers superior strength and safety. Manufactured from drop-forged, hardened and tempered steel. Chamfered striking edges prevent chipping and damage to striking surfaces. Its solid fibreglass core handle is securely attached to the head with a powerful epoxy bond. The handle is fitted with an air-cushioned grip for exceptional comfort and reduced fatigue. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Ball Pein Hammer Fibreglass Shaft 908g (32oz)
These Roughneck Digging Bars have a drop-forged steel construction with heat-treated working areas, and a black finish with polished tips. They have a chisel blade for general prying and breaking, and a pointed tip for breaking stone and concrete.1 x Roughneck Digging Bar 7.7kg 25mm x 180cm
44 straight grain wood float is made from 3/4in thick seasoned wood with a smooth finish. Generally used for skimming and to give a sandy surface finish to rendering concrete or plaster. Size: 300 x 125mm (12 X 5 in).
These Roughneck Chisels are made from drop forged steel, heat treated and tempered. Powder coated for a smooth finish with polished tips. The Electricians Chisel & Brick Bolster come with double injected, soft-feel safety grips. Contains the following: 1 x Cold Chisel 16 x 152mm 1 x Cold Chisel 25 x 304mm 1 x Electricians Chisel with Safety Grip 76 x 279mm 1 x Brick Bolster with Safety Grip 102 x 216mm
