The Arctic Hayes Non-contact Infrared Digital Thermometer is perfect for measuring the temperature of hard-to-reach objects. Its unique 12-point circular measurement area allows clear and accurate readings. Other features include an easy-to-read colourful LCD display, adjustable upper and lower limit alarm, data hold/Max. function, D:S 12-1 (distance to spot ratio) and automatic power-off function. Conforms to EMC and RoHS Directive, EN 60825 complaint for laser, CE and UCKA compliance. Specification: Temperature Range: -30 degreeC to &380 degreeC / -22 degreeF to 716 degreeFPower: 2 x 1.5V AAA alkaline battery (supplied)
Arctic Hayes Classic 9g Smoke Cartridges are encapsulated in a polycarbonate plastic sheath. Perfect for testing air filters, fume hoods, air balancing and fans, as well as for use within mandatory testing of flues, chimneys, pipe and ductwork. White smoke can also be used for photography, special effects and more. Each cartridge supplies approximately 7m³ of dense smoke for 75 seconds. Supplied in a resealable plastic pack. Complies with BS 5440-1.
The Faithfull Sound Level Meter is a compact digital tool for recording noise levels. It can be used to measure the sound level in all kinds of environments, such as factories, schools, offices, traffic, roads etc.Features include over-range indication, Max./Min. measurement mode, data hold, low battery indication, auto power-off and more. Sound level meters are instruments designed to react to the noise much like the human ear. The measurements taken by sound level meters are compared to known standards to identify whether the noise level could have a detrimental effect on humans located near the noise source.It is supplied with a removable wind noise reducing cap, batteries and user manual.Display: 4 digits LCD with backlightFrequency Weighting: AMeasuring Range: 30 dB - 130 dBFrequency Range: 30Hz~8kHzResolution: 0.1 dBAccuracy: ±1.5 dBOver-range Indicator: "OL" appears when the measured value is higher than the upper limit of the measuring range. "LO" appears when the measured value is lower than the lower limit of the measuring range.MAX./MIN. Measurement ModeTime Weighting: FAST mode and SLOW mode Microphone: Omni-directional Condenser MicrophoneOperating Altitude: <2000m above sea levelOperating Environment: 0-40°C, 20%-30%RHStorage Environment: -10°C to 50°C, <90%RHPower: 3 x 1.5V AAA batteries (supplied)Size: 160 x 54 x 32mmWeight: approx. 110g (including battery)
The Wiss Folding Pocket Knife has a Titanium coated stainless steel blade, Titanium coating is 3X harder than steel providing a longer working life. The blade features a piercing tip with serrated and straight cutting edges for maximum cutting abilities. With a full metal frame for increase durability and a slim, ergonomic handle for maximum comfort. Dual thumb studs and thumb hole provide quick and easy opening of the knife. It is also fitted with a reversible belt clip.
Stabila 70-M Series levels are traditional, light alloy box section levels with smooth sides and electrostatic powder coating. They are similar to the 70 series, but with additional super-powerful rare earth magnets in the measuring surface. With five times the holding power of ferrite magnets, this level will securely grip onto metal posts and beams without slipping. Ideal for household DIY and professional use, especially wet trades due to the ease of cleaning the level profile. 2 Vials: 1 plumb and 1 horizontal.Measurement accuracy: 0.029° = 0.5mm/m.Size: 60cm (24in).
The Stanley 4-in-1 Pocket Driver has a non slip textured surface that will not slip, crack or peel. It has a soft bi-material grip for comfort and is made from S2 tool steel for maximum durability. Magnetic bits attract and hold small screws. Contains: 2 x Double Ended Bits: Slotted 3mm (1/8in)/PH1, Slotted 4mm (5/32in)/PH00.
The Stanley FatMax® Pro Pocket Tape has a Mylar® coated steel blade with large markings and BladeArmor® coating on the first 150mm for extended blade life. This coating makes it 10 times more impervious to damage from wear and tear than your average lacquer coated blade. The 32mm wide blade, offers a stand-out of 4m. The exceptionally tough bi-material case has incorporated cushion grip areas that provide sturdy, slip-resistant hold. Fitted with a 3-rivet, corrosion resistant, Tru-zero hook that is 150% larger than traditional end hooks. Its shape enables overhead, to the side, as well as the more regular type of measurements. Available with metric only or metric and imperial graduations.This Stanley FatMax® Pro Pocket Tape has metric and imperial graduations. Blade Length: 8m/26ftBlade Width: 32mmAccuracy: EC Class II
Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.1 x Stanley Surform® Blade Fine Cut 140mm (5.1/2in)
The Stanley Moulded Body Surform® Flat File for use on all types of wood, aluminium, plastic, copper and laminates. It has a lightweight plastic moulded body. The slight curve on the 140mm (5.1/2in) blade is for increased stock removal and it can be used on push or pull stroke. The blade can be changed without the use of additional tools, simply click on. Overall Length: 335mm (13in).
The Stanley STHT2-28042 Mixing Paddle is a hexagonal rod that will fit a standard drill and is perfect for mixing compound, paint and other materials. The mixer has wings and a protective extension so they do not come in to contact with the bucket. Specification Length: 400mm.Diameter: 80mm.Maximum Capacity: 10kg.Minimum Capacity: 5kg.
The Stanley 0-70-447 adjustable pipe cutter cuts 3-22mm pipe and has the following features:Adjustable to cover a range of pipe sizesDurable metal constructionSteel guide rollers for accuracyReplacement cutter wheel in handle
The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - Flared Tip Size 4.0mmBlade Length 100mm (4 in)
Blades for replaceable blade planes are produced from fine rolled steel, heat treated and ground to a razor sharp edge ready for use. 3 types are available: STA012376 - Convex, for general purpose work. STA012378 - Straight, for rebating or narrow work. STA012379 - Special, with a second bevel. This makes it ideal for plastic laminates.The straight one for rebating or narrow edges.Suitable for RB10 replaceable blade plane. 112100.Card of 5.
Rapid VR22 hog rings are made from galvanised steel and are designed for use with the Rapid FP20 and FP222 Fence Pliers. Please check your fence pliers for compatible sizes. The hog rings are designed for Ø5-11mm netting wire and ideal for fixing fences onto tensioned wires.The Rapid RPDVR22GR215 VR22 Fence Hog Rings (Pack 215) come in green coated steel.
Rapid VR16 hog rings are designed for use with the Rapid FP20 and FP216 Fence Pliers. 1.3mm diameter steel. Fix to wire from 2 to 8mm diameter. Please check your fence pliers for compatible sizes. Available in galvanised or green coated steel.1 x Pack of 400 Rapid VR16 Fence Hog Rings Green Made from galvanised wire which is covered with green plastic for coloured fences.
Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.Size 100mm (4in)Cut half round smooth Flat Side: Double CutHalf-Round: Single CutTanged
The Monument MON2059 2059M multi purpose four way key for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, central heating pump cocks, some radiator valves and drain off valves.
Monument Master Plunger for removing blockages from pipes by building up pressure. With patented bellows to give more displacement than traditional force cups. Easily cleaned and has a removable handle.This plunger is ideal for bath and sink waste pipes. Size: 125mm (5 in).
Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.1 x Monument 1458T Large Force Cup Plunger 120mm (4.3/4in)
Monument force cups or plungers are used to remove blockages from bath and sink waste pipes by building up the air pressure.1 x Monument 1456N Small Force Cup Plunger 75mm (3in)
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 24 x 26mmLength 125mm (5 in)
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 24 x 25mm Length 150mm (6 in)
The Lufkin Unilok Pocket Tape has a yellow clad abrasion resistant blade with 2 colour, easy to read markings in metric and imperial graduations. With a self-adjusting end hook. It has a lightweight high strength case with removable belt clip and a toggle lock that holds the blade securely at any length. Built-in shock absorber cushions blade return.This Lufkin YU835CME Unilok Pocket Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 19mmAccuracy: EC Class II
The Knipex 03 01 series traditional combination pliers are equipped with hardened cutting edges for hard or soft wire up to 2.5mm diameter. The pliers have all the signs of Knipex technology and quality. The oil hardened and tempered construction will give these pliers a longer working life. Knipex 03 01 series combination pliers have separately induction hardened cutting edges that are hardened to approximately 60HRc. They have polished heads and PVC dipped handles. These Knipex pliers have gripping zones for flat and round material. This gives the pliers added grip and makes them ideal for home use, DIY or trade applications. They come in 160, 180 and 200mm versions.These Knipex Combination Pliers ;have the following specification: Length: 160mm (6.1/4in).Cutting Capacity: Hard: 2.0mm, Medium Hard: 3.1mm, Multi-Strand: 9.0mm.
The IRWIN Jack 880UN Universal Toolbox Saw has all the features and benefits of a standard Jack 880, with the convenience of a 14in 'short' blade. The saw is fitted with a high quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing four times the added protection than conventional anti-rust agents. The handle has integrated 90° and 45° angles to aid the user when marking out. Blade Length: 350mm (14 inch).Teeth: 8 tpi.
Irwin Pullsaw Dovetail Saw is designed to cut on the pull stroke. The thin blade and the teeth setting offer a cleaner cut and superb finish. The dovetail saw is suitable for flush cutting and fine, detail cutting. Blade Length: 185mm (7.1/4in).Teeth: 22 tpi.
Gorilla Tubs are flexible, which is the key to the millions of jobs they can perform. They are great for mixing small batches of plaster and mortar; if the mix dries, a few kicks to the flexible body will remove the muck easily. They can be carried with both handles in one hand, shaped for pouring, pressed flat to the floor for scooping, pushed flat against a wall for scraping wallpaper into, catching leaks and so on. Gorilla Tubs are extremely durable and long lasting. The handles have been EU tested and have a working weight of 100 kilos (220 lb), so really heavy loads can be carried between two people. Gorilla Tubs can be used as tool bags, water tubs, rubble removers, roofing, scaffold knuckles, collecting bits, broken glass carrier etc. Features:Infinitely Versatile.Super Flexible.Frost proof.UV Sunlight Proof.Handles CE Tested.Reinforced in key areas for durability.Ribbed profile for strength.The GORTUB14BLK Gorilla Tub Small Size 14 Litre (3 gal) has the following dimensions: Height: 23cm.Diameter: 32cm.Colour: Black.
Fisher steel rule with satin chrome finish and photo etched markings, subdivided in mm, and 10th, 16th, 20th, 32nd, 64th.Figured 10mm, Inches. Double sided except the 2m/72in which is single sided.Size 150mm (6 in)Width 15mm.English and metric markings
High quality, heavy-duty roofing square suitable for both the DIY enthusiast and the craftsman. Stamped with Imperial graduations on one face and metric on the other. Made from steel. Size: 400 x 600mm (16 x 24in).
The Faithfull 4-Way Services Utility Meter Key is made from chrome vanadium steel for strength and durability. It features four popular key shapes: square, triangular and two-way. Suitable for use on radiator taps, gas and electricity meter doors. An essential item for many tradesmen.
Faithfull TORX (Star) Screwdrivers are manufactured from high-quality, correctly hardened and tempered S2 steel. With precision machined tips to provide an optimum fit helping to prevent cam-out and screw stripping. The tips are magnetised to aid screw retention with a black phosphate finish to help provide a long working life. Each screwdriver features a full size bi-material, textured non-slip, soft grip handle for maximum user comfort and ease of use, with a drive icon displayed on the end for easy identification. Contains one of each size, all 100mm long: TX10, TX15, TX20, TX25 & TX30.
Faithfull Phillips tip screwdrivers with high quality, correctly hardened and tempered Chrome Vanadium steel blades. Black phosphate tips provide a long working life and are magnetised for screw retention. The screwdrivers have full size bi-material soft-grip handles for maximising user comfort and firm non-slip gripping. Each handle is coded with a drive icon displayed on the end for easy identification.Type - PhillipsTip - PH 1 Length - 75mm (3 in)
This Faithfull Instrument Precision Screwdriver Set is ideal for watchmakers, model makers, instrument technicians, opticians. electrical and precision engineering shops and many other applications where fine adjustment, along with speedy removal and setting of fixings is required. The revolving body to permits single-handed use while leaving the other hand free when working on small items. The mini set consists of seven precision soft-grip screwdrivers designed for use on small screws. Each screwdriver features a chrome vanadium steel blade with a black tip. The set comprises: 2 x Slotted: 2.5 x 50mm, 3 x 50mm.2 x Phillips: PH00 x 50mm PH0 x 50mm.3 x Torx Star: TX8, TX9, TX10.
3 Piece Faithfull Pliers Set with the most popular selling pliers for everyday use. Manufactured from chrome vanadium steel and fitted with soft grip, non-slip handles for safety and comfort. These pliers meet tough GS standards and are suitable for both the trade and home user. Contents: 1 x Handyman Combination Pliers 180mm (7in), designed to grip and cut. The front section of the serrated jaws are ideal for gripping flat surfaces and the serrated sections match the profiles of rods, pipes and tubing. The induction hardened jaws are suitable for cutting a wide range of materials including medium and medium-hard wire. 1 x Handyman Diagonal Cutting Pliers 160mm (6.1/4in), for cutting medium to medium-hard wire close to the flat surface. The tapered head profile is ideal for accessing confined spaces. Induction hardened jaws and cutting edges are individually processed for maximum performance. 1 x Handyman Long Nose Pliers 165mm (6.1/2in), with serrated jaws to maximise grip and tapered to a fine end for accessing and the manoeuvre of small objects in confined spaces.
