The Bailey's Lockfast drain, chimney and flue brush, has a plastic stock and polypropylene bristles. For brick chimneys and coal burning applications, and drain cleaning purposes.1 x Bailey Z5694 Lockfast Brush 250mm (10in)
The Bailey's Lockfast drain, chimney and flue brush, has a plastic stock and polypropylene bristles. For brick chimneys and coal burning applications, and drain cleaning purposes.1 x Bailey Z5695 Lockfast Brush 300mm (12in)
The Bailey's Lockfast drain, chimney and flue brush, has a plastic stock and polypropylene bristles. For brick chimneys and coal burning applications, and drain cleaning purposes.1 x Bailey Z5697 Lockfast Brush 400mm (16in)
The Bessey AV2 Spacer is designed for laying parquet, laminated and panel flooring without any wedges. Spacer for floating laminate and parquet flooring installations.Wide contact and support area for avoiding pressure points on thefloorboards and plaster.Easy to remove by simply turning back.Very light and compact. Features: 1 Clever dial Set up is fast and simple. Inserted between the wall and the first row of flooring, the distance to the wall can be set simply by turning the red dial. When the installation work is finished, the spacer is easy to remove; just rotate the dial to release the pressure.2 Wide contact and support surface - Simply put, the pressure points on the wall and the flooring are avoided. There is no danger of the aid slipping or tilting – as can happen with wedges or blocks – when working with the BESSEY spacer.3 Exact millimetre scale. Wall surface irregularities of 5 to 20 mm can be compensated for easily. The exact distance required for spacing can be readily seen on the millimetre scale.4 'Robust' in the size of a business card. Manufactured from impact and break resistant, glass fibre reinforced polyamide, the spacer is light and tough and should last for years. Spacer AV2. Each pack contains 4 spacers.
The band clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm all-round clamping which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60° to 180° . Clamping Range Up to 7mBand Width & Depth 25mm x 1mm Angle 60 / 80 DegreesWeight: 0.53Kg
Whether you are clamping or spreading: the original BESSEY DuoKlamp always lies securely in your hand. Thats because the handle and pump lever are parallel to the rail, thus ensuring the best possible hold. The innovative DuoKlamp makes going from clamping to spreading amazingly easy. This allows you to switch the convenient one-handed clamp from clamping to spreading at any time. Simply turn the knob and youre done. So all you need to do is switch not convert. The DuoKlamp DUO clamping and spreading easily with just one hand! Change from clamping to spreading by switching, not converting.Handle with pump lever parallel to the rail.Convenient one-handed operation, with little effort required.All-round clamping in front of, behind and to the side of the rail. Your benefits at a glance:1 Reversing.Dont disassemble the clamp JUST TURN THE KNOB! The practical turning knob allows you to switch easily at any time from clamping to spreading. 2 Parallel handle with pump lever. The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed. 3 Rapidly-adjustable release lever.A press of a button is all it takes: the release lever allows the clamp to be immediately released, as well as rapidly adjusted. 4 Large jaw faces.The large, planar jaw faces made from impact- and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers.The Bessey DUO168 has the following: Clamping force up to 1,200NOpening: 160mmThroat Depth: 85mmSpread: 75-235mmF Size: 9-170mmRail: 20 x 5mm Weight: 0.51kg
Whether you are clamping or spreading: the original BESSEY DuoKlamp always lies securely in your hand. Thats because the handle and pump lever are parallel to the rail, thus ensuring the best possible hold. The innovative DuoKlamp makes going from clamping to spreading amazingly easy. This allows you to switch the convenient one-handed clamp from clamping to spreading at any time. Simply turn the knob and youre done. So all you need to do is switch not convert. The DuoKlamp DUO clamping and spreading easily with just one hand! Change from clamping to spreading by switching, not converting.Handle with pump lever parallel to the rail.Convenient one-handed operation, with little effort required.All-round clamping in front of, behind and to the side of the rail. Your benefits at a glance:1 Reversing.Dont disassemble the clamp JUST TURN THE KNOB! The practical turning knob allows you to switch easily at any time from clamping to spreading. 2 Parallel handle with pump lever. The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed. 3 Rapidly-adjustable release lever.A press of a button is all it takes: the release lever allows the clamp to be immediately released, as well as rapidly adjusted. 4 Large jaw faces.The large, planar jaw faces made from impact- and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers.The Bessey DUO308 has the following: Clamping force up to 1,200NOpening: 300mmThroat Depth: 85mmSpread: 75-380mmF Size: 9-315mmRail: 20 x 5mm Weight: 0.61kg
Whether you are clamping or spreading: the original BESSEY DuoKlamp always lies securely in your hand. Thats because the handle and pump lever are parallel to the rail, thus ensuring the best possible hold. The innovative DuoKlamp makes going from clamping to spreading amazingly easy. This allows you to switch the convenient one-handed clamp from clamping to spreading at any time. Simply turn the knob and youre done. So all you need to do is switch not convert. The DuoKlamp DUO clamping and spreading easily with just one hand! Change from clamping to spreading by switching, not converting.Handle with pump lever parallel to the rail.Convenient one-handed operation, with little effort required.All-round clamping in front of, behind and to the side of the rail. Your benefits at a glance:1 Reversing.Dont disassemble the clamp JUST TURN THE KNOB! The practical turning knob allows you to switch easily at any time from clamping to spreading. 2 Parallel handle with pump lever. The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed. 3 Rapidly-adjustable release lever.A press of a button is all it takes: the release lever allows the clamp to be immediately released, as well as rapidly adjusted. 4 Large jaw faces.The large, planar jaw faces made from impact- and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers.The Bessey DUO458 has the following: Clamping force up to 1,200NOpening: 450mmThroat Depth: 85mmSpread: 75-535mmF Size: 9-470mmRail: 20 x 5mm Weight: 0.72kg
Whether you are clamping or spreading: the original BESSEY DuoKlamp always lies securely in your hand. Thats because the handle and pump lever are parallel to the rail, thus ensuring the best possible hold. The innovative DuoKlamp makes going from clamping to spreading amazingly easy. This allows you to switch the convenient one-handed clamp from clamping to spreading at any time. Simply turn the knob and youre done. So all you need to do is switch not convert. The DuoKlamp DUO clamping and spreading easily with just one hand! Change from clamping to spreading by switching, not converting.Handle with pump lever parallel to the rail.Convenient one-handed operation, with little effort required.All-round clamping in front of, behind and to the side of the rail. Your benefits at a glance:1 Reversing.Dont disassemble the clamp JUST TURN THE KNOB! The practical turning knob allows you to switch easily at any time from clamping to spreading. 2 Parallel handle with pump lever. The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed. 3 Rapidly-adjustable release lever.A press of a button is all it takes: the release lever allows the clamp to be immediately released, as well as rapidly adjusted. 4 Large jaw faces.The large, planar jaw faces made from impact- and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers.The Bessey DUO658 has the following: Clamping force up to 1,200NOpening: 650mmThroat Depth: 85mmSpread: 75-685mmF Size: 9-660mmRail: 20 x 5mm Weight: 0.86kg
The one-handed clamp EHZ - full power with just one hand This extremely sturdy original BESSEY one-handed clamp EHZ is perfect for all work that needs to be carried out with one hand e.g. for overhead tasks, or if a further tool needs to be used at the same time for aligning purposes. Not only does the one-handed clamp allow you to hold or fix in place with just one hand, it also allows you to clamp just as powerfully as ever. That means you save both manpower and time. Clamp and fix in place quickly and simply with just one hand. Your benefits at a glance: 1 Parallel handle with pump lever.The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed. 2 Rapid move button.This button allows you to move the sliding arm at any time, quickly and with minimum effort. 3 Plastic pressure caps The removable plastic caps provide a nonmarring soft-touch for use with wood and finished metal surfaces. 4 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic.The Bessey EHZ302K has the following: Clamping force of up to 5,000NOpening: 300mmThroat Depth: 100mm Rail: 19.5 x 9.5mm
The one-handed clamp EHZ - full power with just one hand This extremely sturdy original BESSEY one-handed clamp EHZ is perfect for all work that needs to be carried out with one hand e.g. for overhead tasks, or if a further tool needs to be used at the same time for aligning purposes. Not only does the one-handed clamp allow you to hold or fix in place with just one hand, it also allows you to clamp just as powerfully as ever. That means you save both manpower and time. Clamp and fix in place quickly and simply with just one hand. Your benefits at a glance: 1 Parallel handle with pump lever.The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed. 2 Rapid move button.This button allows you to move the sliding arm at any time, quickly and with minimum effort. 3 Plastic pressure caps The removable plastic caps provide a nonmarring soft-touch for use with wood and finished metal surfaces. 4 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic.The Bessey EHZ602K has the following: Clamping force of up to 5,000NOpening: 600mmThroat Depth: 100mmRail: 19.5 x 9.5mm
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey G12H Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 120mm.Throat Depth: 60mm.Rail: 13.5 x 5.6mm.Weight: 0.49kg.
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey GH16 Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 160mm.Throat Depth: 80mm.Rail: 16 x 7.5mm.Weight: 0.64kg.
Particularly light and easy-to-handle. With BESSEY you can be sure of an extremely high quality, durable clamping tool which is also light and easy-to-handle. Even at the high clamping force, it will retain its dimensions and resist distortion. So in future, if you are looking for a powerful, flexible clamping effect, then what you need is a BESSEY all-steel screw clamp! High-quality 2-component plastic handle.Pressure plates may be changed without tools. Your benefits at a glance: 1 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic. 2 Forged sliding arm.The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can always be sure of that. 3 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. 4 Lightweight.Thanks to its lightweight, the original BESSEY all-steel screw clamp is deally suited to assembly work on the move. Or indeed for larger applications for which several screw clamps are required at the same time.The Bessey G16Z2K has the following: Clamping force up to 5,000NOpening 160mmThroat depth 80mmRail 16 x 7.5mmWeight 0.48Kg
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey GH20 Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 200mm.Throat Depth: 100mm.Rail: 19.5 x 9.5mm.Weight: 1.11kg.
Particularly light and easy-to-handle. With BESSEY you can be sure of an extremely high quality, durable clamping tool which is also light and easy-to-handle. Even at the high clamping force, it will retain its dimensions and resist distortion. So in future, if you are looking for a powerful, flexible clamping effect, then what you need is a BESSEY all-steel screw clamp! High-quality 2-component plastic handle.Pressure plates may be changed without tools. Your benefits at a glance: 1 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic. 2 Forged sliding arm.The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can always be sure of that. 3 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. 4 Lightweight.Thanks to its lightweight, the original BESSEY all-steel screw clamp is deally suited to assembly work on the move. Or indeed for larger applications for which several screw clamps are required at the same time.The Bessey G20Z2K has the following:Clamping force up to 5,000NOpening 200mmThroat depth 100mmRail 19.5 x 9.5mmWeight 0.85Kg
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey G25H has the following: Clamping force up to 8,000NOpening: 250mmThroat Depth: 120mmRail: 22 x 10.5mm
Particularly light and easy-to-handle. With BESSEY you can be sure of an extremely high quality, durable clamping tool which is also light and easy-to-handle. Even at the high clamping force, it will retain its dimensions and resist distortion. So in future, if you are looking for a powerful, flexible clamping effect, then what you need is a BESSEY all-steel screw clamp! High-quality 2-component plastic handle.Pressure plates may be changed without tools. Your benefits at a glance: 1 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic. 2 Forged sliding arm.The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can always be sure of that. 3 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. 4 Lightweight.Thanks to its lightweight, the original BESSEY all-steel screw clamp is deally suited to assembly work on the move. Or indeed for larger applications for which several screw clamps are required at the same time.The Bessey G25Z2K has the following: Clamping force up to 5,000NOpening 250mmThroat depth 120mmRail 22 x 10.5mmWeight 1.25Kg
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey GH25 Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 300mm.Throat Depth: 140mm.Rail: 25 x 12mm.Weight: 2.27kg.
Particularly light and easy-to-handle. With BESSEY you can be sure of an extremely high quality, durable clamping tool which is also light and easy-to-handle. Even at the high clamping force, it will retain its dimensions and resist distortion. So in future, if you are looking for a powerful, flexible clamping effect, then what you need is a BESSEY all-steel screw clamp! High-quality 2-component plastic handle.Pressure plates may be changed without tools. Your benefits at a glance: 1 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic. 2 Forged sliding arm.The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can always be sure of that. 3 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. 4 Lightweight.Thanks to its lightweight, the original BESSEY all-steel screw clamp is deally suited to assembly work on the move. Or indeed for larger applications for which several screw clamps are required at the same time.The Bessey G30Z2K has the following:Clamping force up to 5,000NOpening 300mmThroat depth 140mmRail 25 x 12mmWeight 1.85Kg
Particularly light and easy-to-handle. With BESSEY you can be sure of an extremely high quality, durable clamping tool which is also light and easy-to-handle. Even at the high clamping force, it will retain its dimensions and resist distortion. So in future, if you are looking for a powerful, flexible clamping effect, then what you need is a BESSEY all-steel screw clamp! High-quality 2-component plastic handle.Pressure plates may be changed without tools. Your benefits at a glance: 1 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic. 2 Forged sliding arm.The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can always be sure of that. 3 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. 4 Lightweight.Thanks to its lightweight, the original BESSEY all-steel screw clamp is deally suited to assembly work on the move. Or indeed for larger applications for which several screw clamps are required at the same time.The Bessey G40Z2K has the following:Clamping force up to 5,000NOpening 400mmThroat depth 120mmRail 25 x 12mmWeight 2.00Kg
Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy-to-handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5 x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.The Bessey GH50 Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 500mm.Throat Depth: 120mm.Rail: 25 x 12mm.Weight: 0.64kg.
The BESSEY GearKlamp GK offers the perfect solution for conveniently clamping work even in the tightest spaces. BESSEY's patented design separates the handle from the spindle and positions it around the rail. The GearKlamp's force is transferred due to the concealed internal gear mechanism in the sliding jaw. The V-grooves on the upper section securely hold round, pointed and angular components. Its design is more compact than classic screw clamps, lever clamps and one-handed clamps. Fitted with a 2-component soft grip handle that offers superb comfort and a quick-release button for fast adjustment and release. A swivel pressure plate and protective caps protect the work piece.This BESSEY GearKlamp GK Transmission Clamp has the following specification: Opening: 150mmThroat Depth: 60mmClamping Force: 2,000NRail Section: Width: 25mm, Thickness: 12mmWeight: 0.62kg (Approx.)
The BESSEY GearKlamp GK offers the perfect solution for conveniently clamping work even in the tightest spaces. BESSEY's patented design separates the handle from the spindle and positions it around the rail. The GearKlamp's force is transferred due to the concealed internal gear mechanism in the sliding jaw. The V-grooves on the upper section securely hold round, pointed and angular components. Its design is more compact than classic screw clamps, lever clamps and one-handed clamps. Fitted with a 2-component soft grip handle that offers superb comfort and a quick-release button for fast adjustment and release. A swivel pressure plate and protective caps protect the work piece.This BESSEY GearKlamp GK Transmission Clamp has the following specification: Opening: 300mmThroat Depth: 60mmClamping Force: 2,000NRail Section: Width: 25mm, Thickness: 12mmWeight: 0.73kg (Approx.)
Feather light yet ultra strong. Extremely lightweight, stable magnesium, fibreglass reinforced plastics, and cold-drawn BESSEY quality steel: this optimum mixture is characteristic of the innovative high-tech KliKlamp lever clamp. That's why the smallest KliKlamp weighs just a tiny 260 g simply ideal for assembly work or where several clamps are being used at once. The pressure is also built up easily and highly effectively: the VIBRAFIX ratchet mechanism lets you achieve a huge clamping force quickly with just 2 fingers. You certainly will never have clamped as quickly, easily or as gently as this! Weight starts from a tiny 260g.Sturdy fixed and sliding arms made from lightweight magnesium.Stepped, vibration-resistant VIBRAFIX ratchet mechanism. Your benefits at a glance: 1 Sturdy magnesium.The surface-coated fixed and sliding arms, made from sturdy magnesium, are extremely light and strong. 2 VIBRAFIX stepped ratchet mechanism.The multi-stage VIBRAFIX ratchet mechanism is easy to operate, vibration-resistant, particularly easy-to-control, and can be released quickly. 3 A secure hold.The fixed arm with the crossed v-grooves holds round, pointed or angular components firmly in place. This is part of what makes the KliKlamp so versatile. 4 Ergonomically shaped clamping arm.The ergonomically shaped clamping arm made from fibreglass-reinforced polyamide is breakproof and fits very snugly in the hand. Thats quality of the highest calibre.The Bessey KLI12 has the following: Clamping force up to 1,200NOpening 120mmThroat depth 80mmRail 20 x 5mmWeight 0.26Kg
Feather light yet ultra strong. Extremely lightweight, stable magnesium, fibreglass reinforced plastics, and cold-drawn BESSEY quality steel: this optimum mixture is characteristic of the innovative high-tech KliKlamp lever clamp. That's why the smallest KliKlamp weighs just a tiny 260 g simply ideal for assembly work or where several clamps are being used at once. The pressure is also built up easily and highly effectively: the VIBRAFIX ratchet mechanism lets you achieve a huge clamping force quickly with just 2 fingers. You certainly will never have clamped as quickly, easily or as gently as this! Weight starts from a tiny 260g.Sturdy fixed and sliding arms made from lightweight magnesium.Stepped, vibration-resistant VIBRAFIX ratchet mechanism. Your benefits at a glance: 1 Sturdy magnesium.The surface-coated fixed and sliding arms, made from sturdy magnesium, are extremely light and strong. 2 VIBRAFIX stepped ratchet mechanism.The multi-stage VIBRAFIX ratchet mechanism is easy to operate, vibration-resistant, particularly easy-to-control, and can be released quickly. 3 A secure hold.The fixed arm with the crossed v-grooves holds round, pointed or angular components firmly in place. This is part of what makes the KliKlamp so versatile. 4 Ergonomically shaped clamping arm.The ergonomically shaped clamping arm made from fibreglass-reinforced polyamide is breakproof and fits very snugly in the hand. Thats quality of the highest calibre.The Bessey KLI16 has the following: Clamping force up to 1,200NOpening 160mmThroat depth 80mmRail 20 x 5mmWeight 0.29Kg
Feather light yet ultra strong. Extremely lightweight, stable magnesium, fibreglass reinforced plastics, and cold-drawn BESSEY quality steel: this optimum mixture is characteristic of the innovative high-tech KliKlamp lever clamp. That's why the smallest KliKlamp weighs just a tiny 260 g simply ideal for assembly work or where several clamps are being used at once. The pressure is also built up easily and highly effectively: the VIBRAFIX ratchet mechanism lets you achieve a huge clamping force quickly with just 2 fingers. You certainly will never have clamped as quickly, easily or as gently as this! Weight starts from a tiny 260g.Sturdy fixed and sliding arms made from lightweight magnesium.Stepped, vibration-resistant VIBRAFIX ratchet mechanism. Your benefits at a glance: 1 Sturdy magnesium.The surface-coated fixed and sliding arms, made from sturdy magnesium, are extremely light and strong. 2 VIBRAFIX stepped ratchet mechanism.The multi-stage VIBRAFIX ratchet mechanism is easy to operate, vibration-resistant, particularly easy-to-control, and can be released quickly. 3 A secure hold.The fixed arm with the crossed v-grooves holds round, pointed or angular components firmly in place. This is part of what makes the KliKlamp so versatile. 4 Ergonomically shaped clamping arm.The ergonomically shaped clamping arm made from fibreglass-reinforced polyamide is breakproof and fits very snugly in the hand. Thats quality of the highest calibre.The Bessey KLI125 has the following: Clamping force up to 1,200NOpening 250mmThroat depth 80mmRail 20 x 5mmWeight 0.35Kg
Feather light yet ultra strong. Extremely lightweight, stable magnesium, fibreglass reinforced plastics, and cold-drawn BESSEY quality steel: this optimum mixture is characteristic of the innovative high-tech KliKlamp lever clamp. That's why the smallest KliKlamp weighs just a tiny 260 g simply ideal for assembly work or where several clamps are being used at once. The pressure is also built up easily and highly effectively: the VIBRAFIX ratchet mechanism lets you achieve a huge clamping force quickly with just 2 fingers. You certainly will never have clamped as quickly, easily or as gently as this! Weight starts from a tiny 260g.Sturdy fixed and sliding arms made from lightweight magnesium.Stepped, vibration-resistant VIBRAFIX ratchet mechanism. Your benefits at a glance: 1 Sturdy magnesium.The surface-coated fixed and sliding arms, made from sturdy magnesium, are extremely light and strong. 2 VIBRAFIX stepped ratchet mechanism.The multi-stage VIBRAFIX ratchet mechanism is easy to operate, vibration-resistant, particularly easy-to-control, and can be released quickly. 3 A secure hold.The fixed arm with the crossed v-grooves holds round, pointed or angular components firmly in place. This is part of what makes the KliKlamp so versatile. 4 Ergonomically shaped clamping arm.The ergonomically shaped clamping arm made from fibreglass-reinforced polyamide is breakproof and fits very snugly in the hand. Thats quality of the highest calibre.The Bessey KLI30 has the following: Clamping force up to 1,200N.Opening 300mm.Throat depth 80mm.Rail 20 x 5mm.Weight 0.38kg.
Feather light yet ultra strong. Extremely lightweight, stable magnesium, fibreglass reinforced plastics, and cold-drawn BESSEY quality steel: this optimum mixture is characteristic of the innovative high-tech KliKlamp lever clamp. That's why the smallest KliKlamp weighs just a tiny 260 g simply ideal for assembly work or where several clamps are being used at once. The pressure is also built up easily and highly effectively: the VIBRAFIX ratchet mechanism lets you achieve a huge clamping force quickly with just 2 fingers. You certainly will never have clamped as quickly, easily or as gently as this! Weight starts from a tiny 260g.Sturdy fixed and sliding arms made from lightweight magnesium.Stepped, vibration-resistant VIBRAFIX ratchet mechanism. Your benefits at a glance: 1 Sturdy magnesium.The surface-coated fixed and sliding arms, made from sturdy magnesium, are extremely light and strong. 2 VIBRAFIX stepped ratchet mechanism.The multi-stage VIBRAFIX ratchet mechanism is easy to operate, vibration-resistant, particularly easy-to-control, and can be released quickly. 3 A secure hold.The fixed arm with the crossed v-grooves holds round, pointed or angular components firmly in place. This is part of what makes the KliKlamp so versatile. 4 Ergonomically shaped clamping arm.The ergonomically shaped clamping arm made from fibreglass-reinforced polyamide is breakproof and fits very snugly in the hand. Thats quality of the highest calibre.The Bessey KLI40 has the following: Clamping force: up to 1,200N.Opening: 400mm.Throat depth: 80mm.Rail: 20 x 5mm.Weight 0.45kg.
The Bessey K Body Parallel Jaw Clamp REVO KRE offers powerful clamping and spreading over large surfaces with clamping forces of up to 8.000N. With extremely large parallel clamping surfaces. Fitted with 3 removable pressure caps to help protect the surface, they are repellent to glue, paint and grease solvents. The metal reinforced plastic housing features an optimised sliding arm with double slide protection for more power and safety. The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition. Can be quickly and easily converted without tools for spreading tasks. Fitted with a high quality 2-component symmetrical plastic handle, with a hexagon socket for ultimate comfort and quick and easy application of the clamping force.The Bessey KRE100-2K K Body Parallel Jaw Clamp REVO KRE has the following specification: Clamping Force: up to 8,000NOpening 1000mmThroat Depth: 95mmRail: 29 x 9mmSpreading Min/Max: 225/1130mmWeight: 3.45kg
The Bessey K Body Parallel Jaw Clamp REVO KRE offers powerful clamping and spreading over large surfaces with clamping forces of up to 8.000N. With extremely large parallel clamping surfaces. Fitted with 3 removable pressure caps to help protect the surface, they are repellent to glue, paint and grease solvents. The metal reinforced plastic housing features an optimised sliding arm with double slide protection for more power and safety. The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition. Can be quickly and easily converted without tools for spreading tasks. Fitted with a high quality 2-component symmetrical plastic handle, with a hexagon socket for ultimate comfort and quick and easy application of the clamping force.The Bessey KRE125-2K K Body Parallel Jaw Clamp REVO KRE has the following specification: Clamping Force: up to 8,000NOpening 1250mmThroat Depth: 95mmRail: 29 x 9mmSpreading Min/Max: 225/1355mmWeight: 3.87kg
The Bessey K Body Parallel Jaw Clamp REVO KRE offers powerful clamping and spreading over large surfaces with clamping forces of up to 8.000N. With extremely large parallel clamping surfaces. Fitted with 3 removable pressure caps to help protect the surface, they are repellent to glue, paint and grease solvents. The metal reinforced plastic housing features an optimised sliding arm with double slide protection for more power and safety. The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition. Can be quickly and easily converted without tools for spreading tasks. Fitted with a high quality 2-component symmetrical plastic handle, with a hexagon socket for ultimate comfort and quick and easy application of the clamping force.The Bessey KRE150-2K K Body Parallel Jaw Clamp REVO KRE has the following specification: Clamping Force: up to 8,000NOpening 1500mmThroat Depth: 95mmRail: 29 x 9mmSpreading Min/Max: 255/1610mmWeight: 4.28kg
The Bessey K Body Parallel Jaw Clamp REVO KRE offers powerful clamping and spreading over large surfaces with clamping forces of up to 8.000N. With extremely large parallel clamping surfaces. Fitted with 3 removable pressure caps to help protect the surface, they are repellent to glue, paint and grease solvents. The metal reinforced plastic housing features an optimised sliding arm with double slide protection for more power and safety. The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition. Can be quickly and easily converted without tools for spreading tasks. Fitted with a high quality 2-component symmetrical plastic handle, with a hexagon socket for ultimate comfort and quick and easy application of the clamping force.The Bessey KRE60-2K K Body Parallel Jaw Clamp REVO KRE has the following specification: Clamping Force: up to 8,000NOpening 600mmThroat Depth: 95mmRail: 29 x 9mmSpreading Min/Max: 255/730mmWeight: 2.76kg
The Bessey K Body Parallel Jaw Clamp REVO KRE offers powerful clamping and spreading over large surfaces with clamping forces of up to 8.000N. With extremely large parallel clamping surfaces. Fitted with 3 removable pressure caps to help protect the surface, they are repellent to glue, paint and grease solvents. The metal reinforced plastic housing features an optimised sliding arm with double slide protection for more power and safety. The set clamping force is maintained and the sliding arm cannot unintentionally slip in the unclamped condition. Can be quickly and easily converted without tools for spreading tasks. Fitted with a high quality 2-component symmetrical plastic handle, with a hexagon socket for ultimate comfort and quick and easy application of the clamping force.The Bessey KRE80-2K K Body Parallel Jaw Clamp REVO KRE has the following specification: Clamping Force: up to 8,000NOpening 800mmThroat Depth: 95mmRail: 29 x 9mmSpreading Min/Max: 255/930mmWeight: 3.1kg
The Bessey PS55 is an ideal clamp for clamping smooth surfaces such as ceramic, granite, Corian®, plastic boards, glass. There is a lever for compensating differences in height. Opening: 10-55mm. Width: 130mm.Length: 240-295mm. Weight: 1.55Kg.
