The Wiha Classic Plier Set covers a wider variety of applications. Contains the following: 1 x Pair of Classic Combination Pliers. Made from high-quality C 70 tool steel, tempered. With extra long cutting edge for flat and round cables. OptiGrip; 'three-point support' ensures optimum hold of the workpiece when working. Cutting edges additionally induction hardened to approx. 64 HRC. The Wiha DynamicJoint ensures manual force is optimally transferred to the cutting edges. Conforms to ISO 5746. Size: 180mm.Wire Capacity (mm): Med. Hard: 3.4mm, Hard: 2.2, Hardened Spring Steel: 1.8mm. 1 x Pair of Diagonal Cutters. Made from high-quality C 70 tool steel, tempered. Size: 160mm.Max. Cutting Ø: 2mm. 1 x Pair of Needle Nose Piers. Made from high-quality C 70 tool steel, tempered. With an extra long cutting edge for flat and round cables. Gripping surfaces are partially serrated. Cutting edges additionally induction hardened to approx. 64 HRC. Fitted with Classic Wiha grips for increased comfort. Conforms to ISO 5745. Size: 160mm.Wire Capacity (mm): Med. Hard: 2.5mm, Hard: 1.8, Hardened Spring Steel: 1.2mm.
Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.Size 225mm (9in)
The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, for examle one 8oz jar will provide enough dye for approximately 15,000 litres/3,300 gallons of water. However please note that dirty water will require a greater concentration of dye.The Baileys BAI1992 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: BluePart No: 1992Dilution Rates Litres: 12-14,000
The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, for examle one 8oz jar will provide enough dye for approximately 15,000 litres/3,300 gallons of water. However please note that dirty water will require a greater concentration of dye.The Baileys BAI3591 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: YellowPart No: 3591Dilution Rates Litres: 10-12,000
Baileys Lockfast rods can be rotated in either direction and will remain secure in the most demanding conditions. The rods are manufactured from high grade polypropylene, complete with solid brass joints. These Rods are generally acknowledged as the best quality cleaning rods available which are specified on a world wide basis and are the preferred choice of professionals. Blue Rods® have earned an international reputation for their reliability, strength, rigidity and the right amount of flexibility.Size 3/4 in x 3ft.
The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, for examle one 8oz jar will provide enough dye for approximately 15,000 litres/3,300 gallons of water. However please note that dirty water will require a greater concentration of dye.The Baileys BAI3590 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: RedPart No: 3590Dilution Rates Litres: 12-15,000
Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.Size 150mm (6 in)
Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.Centre locking drain test plugs with steel plates, brass wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers. Size: 100mm (4in).
The Bosch GLM 50-27 C Professional Laser Measure offers a highly durable design which defies rough conditions while enabling fast documentation and ease of use. Perfect for demanding jobsites, its IP65 protection-certified design features a shock-absorbing housing and resists 1.5-metre drops even on hard concrete. Thanks to quick data transfer via Bluetooth connectivity and Bosch’s MeasureOn App, documentation of measuring results has never been easier. Intuitive handling is ensured by its smart user interface with many helpful features such as a high-end colour display and a handy help function. Ideal for documentation, calculating material needs, room and wall areas, and placing plus fitting elements, it is the unbeatable choice for architects, electricians, and many other professions. Specifications: Measurement Range: 0.05-50.00m.Measurement Accuracy: ±1.5mm.Units of Measurement: m/cm/mm/ft/inch/ft-inch.Measurement Range of Incline Measurement:0-360 degree (4 x 90 degree).Measurement Accuracy: ±0.2 degree*.Laser Diode: 635 nm, < 1 mW.Laser Class: 2.Memory Capacity (Values): 30.Power Supply: 2 x AA 1.5V LR6 Batteries (supplied).Dust and Splash Protection: IP65.Tripod Thread:1/4in.Weight: 0.2kg.
Bosch GIM 60 L Pro Incline Measurer with integrated point laser for incline measurement up to a distance of 30m. Fitted with strong magnets and two straps for securely fastening the instrument to workpieces. There is also an incline mechanism for fine adjustment on uneven surfaces. Specifications: Length: 60cm.Measurement Range: 0 - 360 degree (4 x 90 degree).Electronics Measurement Accuracy: @0 degree/90 degree ± 0.05 degree, @1-89 degree ± 0.2 degree.Laser Range: 30m.Laser Levelling Accuracy:± 0.5mm/m.Laser Type:635 nm, < 1 mW.Laser Class:2.Units of Measurement: degree, %, mm/m.Power Supply: 4 x AA 1.5 V LR6 Batteries (supplied).Tripod Thread:1/4in.Weight: 0.91kg.
Bosch GAM 220 MF Professional Angle Measurer for automatic calculation of single and double mitre angles without any other tools. A memory function allows for rapid calculation and transfer of angle, ideal for frequently used angle dimensions. Specifications: Measurement Range: 0-220 degree.Measurement Accuracy: ± 0.1 degree.Vial Measurement Accuracy:± 0.05 degree.Accuracy of Angle Calculation:± 0.1 degree.Power Supply: 4 x AA 1.5 V LR6 Batteries (supplied).Arm Length: 40cm.Weight: 1.3kg.
Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.Size 100mm (4 in)
The proper tool for driving hardened nails and cold chisels.One-piece steel hammer with Estwing's world famous blue shock reduction nylon vinyl grip.Weight: 1810g (4lb).
These brushes are ideal for cleaning patios, barbeques, paint and rust from hard surfaces and cleaning small parts such as contacts on spark plugs, and can also be used for cleaning paint, rust, damp patches from brickwork, woodwork, metalwork etc.This set consists:The Carbon Steel Wire Brush which is a 4 row general purpose wire brush, it is a 300mm (12in) brush with 11 sets of anodised carbon steel bristles and a TPR soft-grip handle.Like all in the trio this wire brush is ideal for cleaning patios, barbeques, paint and rust from hard surfaces and cleaning small parts such as contacts on spark plugs. It can also be used for cleaning paint, rust, damp patches from brickwork, woodwork, metalwork etc.1 x Roughneck ROU52042 Carbon Steel Wire Brush Soft Grip with Scraper 300mm (12in).The Heavy Duty Tapered Block Wire Brush which is ideal for cleaning corners. It has 18 sets of large carbon steel bristles and is suitable for general purpose use and soft grip for comfort. It is also ideal for cleaning patios, BBQ's, paint, rust, damp patches from brick work, woodwork, metal work and much more.1 x Roughneck ROU52050 Block Wire Brush with Handle, overall length 165mm (6½in).The Heavy-Duty Two-Handed Wire Brush is ideal for applying extra force and features two soft grips for comfort in use. It has 32 sets of large carbon steel bristles and is suitable for general purpose use. It is also ideal for larger areas, cleaning patios, BBQ's, paint, rust, damp patches from brick work, woodwork, metal work and more.
Red impact resistant plastic level with two right-angled vials. Ideal for checking the incline of two horizontal surfaces simultaneously. Made from ABS plastic which makes the level both light and durable. The tube vials are made of Plexiglas.
The T block ball pein hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.1 x Hulfafors T Block Ball Pein Hammer Large
The Electrician's hammer is a versatile hammer with a U-shaped striking face ideal for working in confined spaces. The U-shape makes it possible to work close to ceilings and corners without leaving marks on surrounding surfaces while the straight claw makes it easy to get at and remove nails and clamps in confined places. Ergonomically designed handle for a good grip along the entire handle, regardless of power or precision. Weight: 550g.
This Hultafors PY30/15 Pacer Tape has metric and imperial measurements. Specification: Blade Length: 30m/100ft.Blade Width: 13mm.Accuracy: EC Class II.
Versatile, easy-to-use nail puller. Despite its small size, it can easily pull out a 5 in nail, even when the head of the nail is off or buried deep in the wood. Made of red lacquered hardened steel.
The Hultafors H 700 B Aluminium Bending Bar is made with a bent tip. Originally produced to test wheel bearings on cars, but also used by locksmiths to adjust door fittings. As aluminium does not rust, it has a better resistance to extreme temperatures and is also more flexible than steel tools.
The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC10 Scandinavian Butt Chisel. Blade: 10mm.Overall Length: 232mm.
Monodex Nibbler Shears are easier to use in many applications than conventional tinsnips. The upward cutting action of the blade cuts through mild steel up to 20 gauge and most non-ferrous metals up to 18 gauge thickness. Cuts without distorting the sheet. Cutting Capacities: Stainless steel: 0.6mm (22Ga; 0.023in).Galvanised steel, zinc, sheet metal: 1.2mm (16Ga; 0.047in).Copper, brass: 1.5mm (15Ga; 0.059in). PVC, vinyl flooring, aluminium: 2mm (12Ga; 0.078in).Polycarbonate: 2.5mm (10Ga; 0.098in). Perfect for cutting rails and studs. Replaceable stainless steel blade. No shear strain. Nibbling width: 2.7 mm.
DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 300mm (12 in)
The sharpening of the two blade edges and the design of the handle on this Hultafors Electricians Knife are optimised for cable stripping. The knife blade is made from Japanese 1.5 mm knife carbon steel that has been hardened to 58-60 HRC. A unique method for attaching the sheath around a button on work clothes means it does not loosen, but is easy to remove. The sheath fits just as well on a belt as on buttons. The handle and sheath are made from extra durable PP plastic. Blade Length: 33mm.Overall Length: 158mm.Supplied loose.
Hultafors Dry-Marker Refills supplied in a smart container with 10 leads for marking on all types of surfaces. The container protects the leads during transport and only ejects one lead at a time. Clips for easy storage in a pocket or bag. These refills fit the Hultafors Dry-Marker. Available options: either graphite only or graphite, red and yellow chalks.1 x Pack of 10 Hultafors Dry-Marker Refills containing: 4 x Graphite Leads3 x Red Chalk Leads3 x Yellow Chalk Leads
The Faithfull Spring Clamp is easy-to-use and cost effective. Made from durable engineering plastic and fitted with a bi-material handle for increased comfort and ease of use. Ideal for general-purpose clamping needs, from holding material whilst fixing, to simple tasks such as securing sheeting or tarpaulins.Faithfull Spring Clamp 50mm (2in) supplied in a pack of 4.
Blackedge carpenters pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain. Available in three grades - Green (hard). For Hardwoods, Brickwork and Plastered wallsRed (medium). For General CarpentryBlue (soft). For Softwoods and newly felled timberCard of 12. Hard (Green) Ideal for marking Hardwoods, Brickwork and Plastered walls.
Wrecking bars are an essential tool for all builders, carpenters and plumbers and widely used in factories, warehouses and the farming industry. Manufactured from octagonal steel cross section with hardened and tempered chisel and claw ends, which ensure maximum strength and durability. For opening packing cases, pulling out nails, levering off shuttering etc.Size: 750 x 19mm (30 x 3/4 in).
Blackedge carpenters pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain. Available in three grades - Green (hard). For Hardwoods, Brickwork and Plastered wallsRed (medium). For General CarpentryBlue (soft). For Softwoods and newly felled timberCard of 12. Soft (Blue) Ideal for marking Softwoods and newly felled timber.
PlastiKote Trade Leak Detector Spray for the detection of leaks in gas pipes. It has a non-combustible, non-corrosive formula that can be removed with water.
