This Footprint Cold Chisel is ideal for use on stone, masonry, brick work and other similar materials. It has a heavy-duty design and is made from a fully drop forged single piece of Carbon Steel. The cutting edge is hardened and ground for a longer life, and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain.The cold chisel has a comfortable hand grip for extra safety.
The Bulldog Square Punner (tamper) has a one piece head design and a large, square, solid-cast head. The handle is made from tubular steel. It is ideal for finishing work on asphalt surface, to tamp up close to walls and corners where mechanical rollers leave ridges or cannot get access. Part of Bulldog's Premier Agricultural Tool range, manufactured to the highest possible specification to guarantee quality. Made In Britain.
The Wiha SoftFinish electric slimFix Phillips Screwdrivers comes with a high quality Chrome vanadium steel blade, through hardened with a black-finish. Insulation is moulded directly onto blade. Individually tested at 10,000 V AC and approved for 1,000 V AC.Patented SoftFinish handle ensures work is kind to hands and muscles. Recommended by doctors and therapists at the German Campaign for Healthier Backs. slimFix handles have been specially developed for electric applications, blades are up to 33% slimmer. The unique Wiha handle-length concept provides optimum balance of torque and control. Manufactured according to IEC 60900.1 x Wiha SoftFinish electric slimFix Screwdriver Phillips PH1 x 80mm.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. FF144.Size. 100 x 12mm (4 x 1/2 in).Grade. Fine.
The Wiha TorqueVario-S electric Screwdriver System provides controlled screw tightening combined with safe use for electric installations. Both the screwdrivers and the slimBits undergo an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC. This 14 Piece Set contains the following: 1 x TorqueVario-S electric Screwdriver Handle. Covers a wide variety of applications with a torque range between 0.8 and 5.0 Nm. A clearly audible, physically perceptible signal emitted when the torque is produced guarantees process safe torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of ± 6%, the torque tool complies with EN ISO 6789 requirements. The insulated ClicFix bit holder guarantees a secure hold for 75 mm long slimBits thanks to mechanical blade locking. 1 x Setting Tool with Long Handle 90mm. 1 x SoftFinish electric slimVario Screwdriver with bit holder. 1 x TorqueVario-S electric Adaptor. 3 x Slotted slimBit electric Blades: 2.5 x 75mm, 3.5 x 75mm & 5.5 x 75mm. 2 x Phillips slimBit electric Blades: PH1 x 75mm & PH2 x 75mm. 2 x Pozidriv slimBit electric Blades: PZ1 x 75mm & PZ2 x 75mm. 2 x PlusMinus/Pozidriv slimBit electric Blades: SL/PZ1 x 75mm & SL/PZ2 x 75mm. 1 x Folding Case. Made from high-grade, hard-wearing materials. All components are arranged practically so they are easy to identify.
The Wiha electric PocketMax Screwdriver is made for controlled fastening for live parts up to 1,000 V AC. It conveniently fits into any shirt or pants pocket, the ideal companion for every professional. The bit depot is securely stowed in the handle and includes four 75mm slimBits, they ensure perfect access to low-lying screws or spring clips. Thanks to a magnetic shut function, the bit depot can very easily be opened to remove the bits. During closing, the bit depot smoothly and easily glides back into the shaft and practically closes by itself thanks to the magnet. Its twistable cap ensures convenient handling.Both the magazine bit holder and the slimBits have been individually tested as per international IEC 60900 standards. Supplied with: 1 x electric Slotted slimBit 3.5 x 75mm. 2 x electric Phillips slimBits: PH1 x 75mm & PH2 x 75mm. 1 x electric PlusMinus/Pozidriv slimBit SL/PZ2 x 75mm.
These Facom 12-point OGV sockets have a 3/8 inch drive to fit 3/8 inch ratchets. The sockets are long-reach, and their OGV profile allows tightening torque to be applied to the sides, rather than to the angles of the nut/bolt. They are an excellent choice for tightening/loosening harder to reach nuts, bolts and other fasteners. Available in a range of different metric sizes. Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMJ13LA Deep Socket has the following specifications:Socket size: 13.0mm.Length: 55mm.
The Faithfull Pick Axe has a high quality solid eye navy pick head with chisel and point for the breaking of concrete. This tool is virtually unbreakable and incorporates a soft-grip, non-slip fibreglass handle.
Roughneck Toolbox Saw with triple ground teeth, which are heat treated for faster cutting and a longer lasting cutting edge. With double injected soft-grip handle for comfort and hand protection, which is shaped to allow cutting at 90° and 45°. Suitable for cutting hardwood, softwood, rough timber, board sheet, worktop, floorboard, melamine and PVC. Blade Thickness: 1mm.Teeth: 10 tpi.Length: 350mm (14 inch).Teeth: 10tpi.
The Roughneck Ultimate Mortar Gun offers 7 applications in one gun, and is suitable for mortar, grout, adhesive, sealant, cartridges, foil packs and bulk material. This spares kit has a heavy-duty ratchet mechanism with a high thrust ratio, high density push block with hardened release plate, and push rod. Along with a strong 750mm aluminium tube, aluminium front and back rings, this mortar gun is an ideal choice for re-pointing or filling applications.Spares Kit.
The Roughneck Ground Breaking Bar is ideal for use in locations and jobs where a normal crowbar is not sufficient or a pick not accurate enough. This heavy-duty bar is made up of an inner solid crowbar with a chisel tip, drop forged, heat treated and hardened. A weight slides up and down the central bar and exerts blows on the target material. It is ideal for breaking up hard ground, rocks, concrete slabs, asphalt etc. For extra impact, the end stopper can be removed to allow the weight to drop from a greater height.
Roughneck Gorilla Sledge Hammers are precision forged from high carbon steel. Each sledge hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger than normal striking face with chamfered edge for general use. Both of these striking faces are induction heat-treated for hardness. The hammers also feature a side striking face which is not hardened and is designed for striking wooden posts. A shock absorbing TPE grip handle is designed for maximum comfort.This Gorilla Sledge Hammer has the following specifications: Weight: 4.5kg (10lb).Length: 780mm.
This Roughneck Replacement Handle is made from double injected fibreglass with a solid core for added strength. With a polypropylene cover for reduced vibration and added comfort. For use with a No.6 Eye pick, mattock, paving maul etc.
The Roughneck Gorilla Moulding Bar has a wide jaw end, ideal for scraping and prying trim from walls. The head features a striking face allowing the bevelled jaws to be punched deep into the material to pry out embedded nails. Drop-forged hardened and tempered steel construction for extreme strength and durability. It also has polished tips and 2 x nail removers.1 x Roughneck Gorilla Moulding Bar 300mm (12in)
This Teng Tools Socket is a professional, 3/8 inch drive regular 6 point metric socket, produced in accordance with ISO 9000 and AS954 specifications. It provides excellent torque and reduces the risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety. The socket is manufactured from chrome vanadium steel with a satin finish.Size: 17mm.Overall length 29mm
Open ended cranked podger spanners manufactured from chrome alloy steel with a corrosion resistant black finish.The tapered end is generally used for hole alignment.Size 17mm.Length 281mm.
Nail punches are designed to drive nail heads below the surface of the wood. Square head provides a large striking area which also stops the punch from rolling off the bench. Knurled body with hardened, slightly cupped head.Size. 3/32 in.Length 4 in
Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. 6mm (1/4 in)Contents A to Z Plus & (and)
Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 35mm (1 3/8 in)
Open ended cranked podger spanners manufactured from chrome alloy steel with a corrosion resistant black finish.The tapered end is generally used for hole alignment.Size 22mm.Length 281mm.
Letter punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Packed in attractive plastic box.Size. 3mm (1/8 in)Contents: A to Z plus & (and)
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.8mm (3/16 in).
Manufactured from heat-treated tool steel, this dual function tool is used firstly to set the rivet up and then to form the head.Size 3 x 115mm (1/8 x 4 3/4 in).
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 1.6mm (1/16 in).
Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling.Size 6.0mm (1/4 in)Length 100mm (4 in)
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 9.5mm (3/8 in).
Short bent reversible ratchet podger with a hole for attaching a lanyard. It has a flush box for use when space is restricted and is made of high-quality steel. Flick switch for quickly changing the direction of the head. Reversible box type socket, 19mm on one side for use on aluminium beam bolts and 21mm (7/16 W) on the other. Length: 240mm (9.1/2in).
This hollow punch is made from carbon steel. It has a ground tapered section with a milled clearway for removing waste materials. It is intended for cutting soft materials such as leather.
Number punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Set contains 0-9 with the latter inverted to double up as a 6. Packed in attractive plastic box.Size. 6mm (1/4 in).
The Priory 124 Series Round Head Centre Punches are high quality, British manufactured punches.They are made from high quality carbon steel and heat-treated to exact tolerances. Precisely knurled body for firm grip.Specifications:Tip: 9.5mm (3/8in).Length: 150mm (6in).
This Combination Podger Scaffold Spanner has a hardened and tempered handle which has a tapered square end suitable for use on scaffold eye bolts and hex whitworth sockets.Length: 250mm.Size 7/16 in Whitworth.
Long straight reversible ratchet podger, with a hole for attaching a lanyard. It has a long handle which can be used for lining up of holes and a flick switch for quickly changing the direction of the head. Made of high-quality steel, with quality powder-coated orange hi-vis finish. Reversible box type socket, 19mm on one side for use on aluminium beam bolts and 21mm (7/16 W) on the other.
Hardened steel punches carefully heat treated for long life. Precisely knurled body with square head which gives a good striking area and prevents the punch from rolling.Size 4mm (5/32 in).Length 100mm (4 in)
