SBS20 series combination spanners manufactured from high grade chrome-vanadium steel for strength and tolerance.The small, flat heads and dynamic drive profile are designed for easy access in confined spaces.Open-end angle 15° , ring end 15° offset,DIN 3113 / ISO 3318 / ISO 7738.Size 13mmLength 160mm.
Bahco Half Round Cut File with a tapered half-round cross section to allow use on convex and concave surfaces. The edges and surfaces are tapered towards the point. It has a double cut surface, and it suitable for deburring work. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: half-round bastard.Tanged.
Bahco BAHCOFIT screwdrivers have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. Their blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification. This set of 6 contains:2 x Slotted: 3.0 x 100mm & 4.0 x 100mm.2 x Phillips: PH1 x 100mm & PH2 x 125mm.2 x Pozi: PZ1 x 100mm & PZ2 x 125mm.
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 110 mm (4.3/8 in). Blade length (B): 10mm (0.39 in). Head width (C): 10mm (0.39 in). Head depth (D): 6mm (0.24 in). Tip width: (F): 0.8mm (0.03 in).Cutting Capacity: 0.1-1.0mm. Cutting edge: Ultra flush. The Ultra flush cutter virtually eliminates the pinch that other cutters make. The cutters configure two flat planes, with a barely discernible line separating each of these planar surfaces. They are perfect for use in close tolerance electronic and medical device assembly, where concerns about final lead-end configuration and mechanical shock transmission are a top priority.
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 112mm (4.1/2in). Blade length (B): 12.5mm (0.5 in). Head width (C): 12.5mm (0.5 in). Head depth (D): 6.0mm (0.24 in). Tip width: (F): 1.2mm (0.05 in). Cutting capacity: 0.3-1.6mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox 18 teeth per 10mmSize 200mm (8in)Tanged
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 25mm.
These Lindstrom Supreme Flat Nose Pliers are produced from high-performance tool steel. These holding pliers have a screw joint that minimises friction and maximises alignment of cutting edges. The handles have a return spring and are sleeved. The pliers' smooth jaws minimise the risk of damage and scratching to the wire. Length (A): 120mm (4.72in). Jaw length (B): 20mm (0.79in). Head width (C): 9mm (0.35in). Head depth (D): 6mm (0.24in). Tip width (E): 1.2mm (0.05in). Tip depth (F): 3.2mm (0.13in).
Bahco DD/S14 Deep Impact Socket Set of 1/2in deep impact sockets, that have a black finish and are made from high performance alloy steel. To be used with machines, for maximum safety use clamping springs. Conforms to DIN 3121-G 12,5 ISO 1174 standards. Comes supplied in a case with 2-component handles, and a 1 piece removable three section plastic box. Sizes: 10, 11, 12 ,13 ,14, 15, 16, 17, 18, 19, 21, 22, 24, and 27mm.
Sievert 8716 Neck and Valve Assembly for direct connection onto the Primus 2000 cylinder giving precise flame control. Back pressure valve to reduce the risk of flare up, it will accept burners of M8 x 0.75 thread from the Sievert Burner range 8725, 8719, 8720, 8842.
The Sievert 50mm 86kW Power Burner is a heavy-duty, lightweight power burner with extremely strong windproof flames capable of withstanding the severest weather conditions. Ideal for drying, bitumen laying, detail and field torching and other demanding applications. For use with PRMS3509, PRMS3510 or PRMS3511.
The Sievert HP Hose Assembly comes supplied complete with a connection nipple. It is suitable for use with Promatic Pro 86 and Pro 88 torch handles.Size 4 metre.
The Vitrex 102902 Margin Float with a latex face laminated to a lightweight foam core, makes this tool both lightweight and excellent at fast, even grouting. Soft grip handle for extra comfort. The slimline shape of this float makes it ideal for grouting in difficult to access areas.
Olympia Tools Bolt Cutter Centre Cut with compound action blades that are made from high carbon alloy steel blades, hardened and tempered, heat treated. Have a secure rubber grip, and are ideal for cutting wire, chains and bolts.These Olympia Centre Cut Bolt Cutters have the following specification: Length: 200mm (8in)Capacity: Soft: 3.5mm, Medium: 2mm
The Faithfull Ball Pein Hammer comes with a traditional hickory handle. Made with FSC 100% certified wood from well-managed forests. Universal engineers metal working hammer, precision ground with hardened striking face to withstand the rigours of all metal working applications.
1 x Faithfull Ball Pein Hammer FSC Hickory 227g (1/2 lb).
Bahco Insulated Screwdrivers are suitable for work on live equipment, up to 1,000 Volts. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The blades are made from high performance alloy steel, which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver is branded with part number, tip symbol and size for easier identification. They are each individually tested and manufactured according to IEC 60900 and conform to ISO 8764. This set of 7 contains:4 x Slotted: 2.5 x 75mm, 4.0 x 100mm, 5.5 x 125mm & 6.5 x 150mm.3 x Pozi: PZ0 x 75mm, PZ1 x 80mm & PZ2 x 100mm.
Stainless steel and hook for added durability and rust prevention. Ergonomic design, holds 30m of string, 30g chalk capacity. Can be used vertically as a plumb bob. Die-cast aluminium case for durability.
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Diameter range: 48-62mm. Maximum allowable back pressure: 37psi (2.50bar).1/2 in BSP outlet.
The Stanley Interlock Snap-Off Blade Knife has a die-cast metal body that is solvent resistant. The durable patented wedge lock action holds the blade securely in position. A simple finger screw action operates the locking mechanism. Suitable for heavy-duty cutting. The knife can be opened and cleaned, making it ideal for applications where material build-up is a problem. Available sizes: 9mm and 18mm. 1 x Stanley Interlock Snap-Off Blade Knife 18mm
Monument White Tallow is the best quality, hard tallow used as a lubricant when threading conduit pipe and when pulling electric cables through conduit.1 x Monument 261P White Tallow 275g Tub.
FatMax® straight pattern tin snips with serrated cutting edges to prevent slippage when cutting. Forged alloy steel construction. Single pivot action and scissor pattern enclosed handles with a soft touch comfort finish. Cuts up to 18 gauge mild steel 0.7 to 1.2mm.Also suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic.Size: 250mm (10in).
The Stanley FatMax® Phillips tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type PhillipsTip Size PH.00Blade Length 50mm (2 in)
The Komelon PowerBlade™ II Pocket Tape has a Dura NY nylon coated steel dual printed blade with vertical blade markings on the reverse and patented hi-vis blade printing. The Dura NY nylon coating offers superior quality that lasts up to 15x longer. Its ergonomically designed ABS case with a moulded rubber grip provides increased comfort. The edges of the blade have been deburred. It also has a magnetic end hook. Available with both metric and imperial graduations or metric only.This Komelon PowerBlade™ II Pocket Tape has metric and imperial graduations. Blade Length: 8m/26ftBlade Width: 27mmAccuracy: EC Class II
The Stanley FatMax® Magnetic BladeArmor® Tape has a Mylar® coated steel blade with metric graduations and an impressive stand-out of 3.3m. The Mylar® coated blade is up to 10 times more resistant to abrasion than normal lacquered blades. Its high-impact ABS plastic case has an oversized rubberised bumper to prolong the life of the hook. With rubber overmould to deliver additional comfort and control, whilst also increasing durability and impact resistance. The 3-rivet, corrosion resistant, magnetic Tru-zero hook allows for accurate inside and outside measurements. This particular hook also features top, bottom and side hooks for easy above, below or side measurements. The forward blade lock design makes it easier to lock and unlock the blade.This Stanley FatMax® Magnetic BladeArmor® Tape has metric graduations only. Blade Length: 5mBlade Width: 32mmAccuracy: EC Class II
Durable heavy-duty I-Beam aluminium level with 1 x fixed horizontal vial and 1 x 180° rotating vial top easy to read centre vial. The horizontal vial can be viewed from both side and above for ease of use. Shock absorbing end caps and pipe groove for use on rounded surfaces. 2 vials. Accurate to ± 1.5mm/1m.Length 1000mm (40 in)
Teng Tools specialises in a range of mechanics' hands tools to suit the price conscious professional user and the quality conscious DIY enthusiast. The Tools have been designed to Teng's own specifications, which meet or exceed British European or federal standards. This Teng Tools socket is a professional, bi-hexagon 1/2 inch square drive socket. It has been produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Made from chrome vanadium steel for strength and durability, with a satin finish.The TENM120524 Bi-Hexagon, 12-point socket has the following specifications:Size: 24mm. Length: 40mm.
The STANLEY FatMax Anti-Slip Combination Wrench provides improved bolt contact, reducing the chance of slippage. Forged in corrosion-resistant chrome vanadium steel with a satin chrome finish for strength and durability. With a 12-point versatile box end for easy fitting over nuts and bolts. It also has a 15 degree offset open and box end offering improved access and torque.1 x STANLEY FatMax Anti-Slip Combination Wrench 15mm
IRWIN® Junior Saw Blades provide improved cutting performance. Their tooth geometry delivers higher resistance against tooth strippage and increases longevity and durability. Leveraging the advantages of WeldTec™ technology, IRWIN® hacksaw blades allow for faster, smoother and less tiring cutting. Can be used on wood. Specification: Length: 150mm (6in)TPI: 14
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. MF134.Size. 100 x 10mm (4 x 3/8 in).Grade. Medium.
The BlueSpot Combination Pliers are manufactured from drop forged micro plated steel for increased durability. Fitted with soft-grip vinyl handles that have a slip guard for increased comfort.
Thor super plastic hammers have a malleable iron head fitted with cylindrical ultra-high molecular weight polythene faces which are designed to wear and be replaced. Available in 3 different weights. The ultra-high molecular weight polythene heads provide high impact, durability and high abrasive resistance. The faces will not fracture, splinter or delaminate. Ideal for use as a general-purpose, soft-faced hammer in engineering applications for assembly, repair and maintenance operations as an alternative to a rawhide faced hammer.Size: 3.Weight 1300g (3lb).Diameter 44mm (1 3/4 in).
Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 6mm (1/4 in).
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mm1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 32mm (1.1/4in)
