Increasingly high clamping pressures, with larger throat depths and wider openings. These are the demands that original BESSEY high-performance clamps need to fulfil on a daily basis. Used in steel and boiler construction, shipbuilding and automotive engineering. Also in heavy timber construction, laminated wood beam construction and carpentry. In other words, wherever sturdy or heavy parts need to be clamped very securely, with a very high clamping pressure. Developed on the basis of the tried-and-tested BESSEY all-steel screw clamp, the original BESSEY high-performance clamps fulfil all requirements with panache... again and again! The high-performance clamp. Your benefits at a glance: Extremely sturdy.Fixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Special tilting pressure plate.The heat-resistant pressure plate is replaceable and can be tilted up to 35° so it can even clamp on angled or sloping surfaces. Tempered spindle. The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability. Sturdy tommy bar.The sturdy tommy bar has special rounded hand-friendly ends, as well as a hexagonal bolt. This allows powerful, controlled clamping.The Bessey SG50M has the following: Clamping force up to 12,000NTightening torque: 40NmOpening 500mmThroat depth 140mmRail 34 x 13mmWeight 3.40Kg
The Bessey Variable Screw Clamps offer flexibility with large clamping widths. They have tempered spindles which are particularly sturdy and wear-resistant. This considerably increases durability. The end fastenings on both sides can be loosened without tools, enabling rapid changeover of the sliding arm for spreading tasks. It is also possible to replace the sliding arms or to add additional sliding arms easily. The U-shaped sliding arms are made from forged tempered steel which guarantees the highest level of safety and can withstand extremely large loads. They have heat-resistant pressure plates which can be tilted up to 35° for angled or sloping surfaces. Clamping force: Up to 6,500N.The SLV150M Variable Screw Clamp has the following specifications: Opening: 1500mm.Throat depth: 120mm.Rail: 28 x 11mm.Weight: 5.25kg.
These Bessey STC Self-Adjusting Horizontal Toggle Clamps automatically adjust to different workpiece heights, while maintaining a constant clamping force. They ensure quick and secure clamping and are ideal for small-scale productions. Using the set screw on the cantilevered joint, the clamping force can be adjusted to meet particular requirements. The base plate, which is suitable for both metric and imperial, has been designed to facilitate fast and secure clamping set up. The Toggle Clamps have high-quality, oil-resistant two-component handles. These are ergonomically designed to fit well in the hand and provide a good grip.This STC Self-Adjusting Horizontal Toggle Clamp has the following specifications: Clamping height: up to 40mm.Clamping force: up to 2500N.Weight: 0.38kg.
These Bessey STC Self-Adjusting Horizontal Toggle Clamps automatically adjust to different workpiece heights, while maintaining a constant clamping force. They ensure quick and secure clamping and are ideal for small-scale productions. Using the set screw on the cantilevered joint, the clamping force can be adjusted to meet particular requirements. The base plate, which is suitable for both metric and imperial, has been designed to facilitate fast and secure clamping set up. The Toggle Clamps have high-quality, oil-resistant two-component handles. These are ergonomically designed to fit well in the hand and provide a good grip.This STC Self-Adjusting Horizontal Toggle Clamp has the following specifications: Clamping height: up to 60mm.Clamping force: up to 2500N.Weight: 0.42kg.
The Bessey SVH400 is ideal for floor coverings such as wood and cork parquet, laminated and panel flooring, which are stylish and fashionable. BESSEY has developed a range of specialist clamping tools that make the laying of these sought after floor coverings easier and more efficient. For laying parquet, laminated and panel flooring. Length: 4.0mBand size: 25mm x 1mmJaw Width : 120mm
Often copied, never equalled: the original malleable cast iron screw clamps from BESSEY the classic screw clamps dating back to 1936. Unmistakable, thanks to their unique high-quality profiled rail and their characteristic malleable cast iron arms, serrated for reinforcement. The integrated BESSEY anti-slip system additionally ensures maximum safety. This is why the original BESSEY malleable cast iron screw clamps have proved so successful for so many years. And so ideal for all applications where powerful, rigid clamping is required. Try them out for yourself! Your benefits at a glance:1 Integrated BESSEY anti-slip system.Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. 2 Reinforced malleable cast iron arms.The characteristic high-quality malleable cast iron fixed and sliding arms, which are serrated for reinforcement, allow powerful, rigid clamping. The powder coating provides additional protection against corrosion. 3 High-quality profiled rail.The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration on six faces additionally prevents the clamp from slipping. 4 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. Noticeably more comfortable.The Bessey TG16-2K Malleable Cast Iron Screwclamp has the following specification: Clamping Force: up to 6,000N.Opening 160mm.Throat Depth: 80mm.Rail: 25 x 6mm.Weight: 0.66kg.
Often copied, never equalled: the original malleable cast iron screw clamps from BESSEY the classic screw clamps dating back to 1936. Unmistakable, thanks to their unique high-quality profiled rail and their characteristic malleable cast iron arms, serrated for reinforcement. The integrated BESSEY anti-slip system additionally ensures maximum safety. This is why the original BESSEY malleable cast iron screw clamps have proved so successful for so many years. And so ideal for all applications where powerful, rigid clamping is required. Try them out for yourself! Your benefits at a glance:1 Integrated BESSEY anti-slip system.Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. 2 Reinforced malleable cast iron arms.The characteristic high-quality malleable cast iron fixed and sliding arms, which are serrated for reinforcement, allow powerful, rigid clamping. The powder coating provides additional protection against corrosion. 3 High-quality profiled rail.The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration on six faces additionally prevents the clamp from slipping. 4 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. Noticeably more comfortable.The Bessey TG20-2K Malleable Cast Iron Screwclamp has the following specification: Clamping Force: up to 6,000N.Opening 200mm.Throat Depth: 100mm.Rail: 27 x 7mm.Weight: 1.05kg.
Often copied, never equalled: the original malleable cast iron screw clamps from BESSEY the classic screw clamps dating back to 1936. Unmistakable, thanks to their unique high-quality profiled rail and their characteristic malleable cast iron arms, serrated for reinforcement. The integrated BESSEY anti-slip system additionally ensures maximum safety. This is why the original BESSEY malleable cast iron screw clamps have proved so successful for so many years. And so ideal for all applications where powerful, rigid clamping is required. Try them out for yourself! Your benefits at a glance:1 Integrated BESSEY anti-slip system.Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away. 2 Reinforced malleable cast iron arms.The characteristic high-quality malleable cast iron fixed and sliding arms, which are serrated for reinforcement, allow powerful, rigid clamping. The powder coating provides additional protection against corrosion. 3 High-quality profiled rail.The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration on six faces additionally prevents the clamp from slipping. 4 Smooth-running spindle.The surface-coated spindle with acme thread is particularly smooth-running, and does not bind. For even smoother, more efficient work. Noticeably more comfortable.The Bessey TG30-2K Malleable Cast Iron Screwclamp has the following specification: Clamping Force: up to 6,000N.Opening 300mm.Throat Depth: 140mm.Rail: 32 x 10mm.Weight: 2.19kg.
Ideal for sensitive workpieces and right angles. The large, perfectly parallel jaw faces are characteristic of the original BESSEY K-body clamp. They allow easy clamping and spreading of sensitive surfaces and right angles. Also round and pointed workpieces. And the best thing is: thanks to their extra-large contact surfaces, the original BESSEY K-body clamp are universally applicable even behind and to the side of the high-quality profiled rail. This allows you to clamp in locations that conventional screw clamps are unable to reach. That's guaranteed! The K-body clamp holds workpieces exactly parallel. Parallel jaw faces with extra-large contact surfaces.Clamping of various shapes, along the whole length of the rail.Universally applicable.Light and easy-to-handle.No need for tools for switching between clamping and spreading. Your benefits at a glance:1 Parallel jaw faces.The large, planar jaw faces made from impact and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers. 2 High-quality profiled rail.The BESSEY hollow profile rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration prevents the clamp from slipping. 3 Removable end stop.The end stop made from impact-resistant polyamide also gives the clamp added support. It can be removed without any tools, to allow the lower arm to be quickly turned around and used for spreading.The Bessey UK30 Uniklamp has the following specification: Clamping Force: up to 1,500N.Opening 600mm.Throat Depth: 80mm.Rail: 20 x 5mm.Weight: 0.93kg.
Ideal for sensitive workpieces and right angles. The large, perfectly parallel jaw faces are characteristic of the original BESSEY K-body clamp. They allow easy clamping and spreading of sensitive surfaces and right angles. Also round and pointed workpieces. And the best thing is: thanks to their extra-large contact surfaces, the original BESSEY K-body clamp are universally applicable even behind and to the side of the high-quality profiled rail. This allows you to clamp in locations that conventional screw clamps are unable to reach. That's guaranteed! The K-body clamp holds workpieces exactly parallel. Parallel jaw faces with extra-large contact surfaces.Clamping of various shapes, along the whole length of the rail.Universally applicable.Light and easy-to-handle.No need for tools for switching between clamping and spreading. Your benefits at a glance:1 Parallel jaw faces.The large, planar jaw faces made from impact and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers. 2 High-quality profiled rail.The BESSEY hollow profile rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration prevents the clamp from slipping. 3 Removable end stop.The end stop made from impact-resistant polyamide also gives the clamp added support. It can be removed without any tools, to allow the lower arm to be quickly turned around and used for spreading.The Bessey UK30 Uniklamp has the following specification: Clamping Force: up to 1,500N.Opening 300mm.Throat Depth: 80mm.Rail: 20 x 5mm.Weight: 0.72kg.
The Bessey Clippix XC Spring Clamps are perfect for gluing, clamping and securing objects. They feature soft, anti-slip ergonomic handles that offer quick and easy one handed operation. The self-adjusting protective caps offer secure non-marking clamping. Manufactured from lightweight fibreglass that has been reinforced with nylon for ease of handling.The Bessey XC1 Clippix XV Spring Clamp has the following specification: Opening: 20mm Throat Depth: 20mmWeight: 0.01kg
The Bessey Clippix XC Spring Clamps are perfect for gluing, clamping and securing objects. They feature soft, anti-slip ergonomic handles that offer quick and easy one handed operation. The self-adjusting protective caps offer secure non-marking clamping. Manufactured from lightweight fibreglass that has been reinforced with nylon for ease of handling.The Bessey XC2 Clippix XV Spring Clamp has the following specification: Opening: 25mmThroat Depth: 30mmWeight: 0.02kg
The Bessey Clippix XC Spring Clamps are perfect for gluing, clamping and securing objects. They feature soft, anti-slip ergonomic handles that offer quick and easy one handed operation. The self-adjusting protective caps offer secure non-marking clamping. Manufactured from lightweight fibreglass that has been reinforced with nylon for ease of handling.The Bessey XC3 Clippix XV Spring Clamp has the following specification: Opening: 35mmThroat Depth: 37mmWeight: 0.05kg
The Bessey Clippix XC Spring Clamps are perfect for gluing, clamping and securing objects. They feature soft, anti-slip ergonomic handles that offer quick and easy one handed operation. The self-adjusting protective caps offer secure non-marking clamping. Manufactured from lightweight fibreglass that has been reinforced with nylon for ease of handling.The Bessey XC5 Clippix XV Spring Clamp has the following specification: Opening: 50mmThroat Depth: 50mmWeight: 0.012kg
The Bessey Clippix XCL Spring Clamps are perfect for gluing, clamping and securing objects. With a needle nose design that offers extra throat depth. They feature soft, anti-slip, ergonomic handles that offer quick and easy one handed operation. The self-adjusting protective caps offer secure non-marking clamping. Manufactured from lightweight fibreglass that has been reinforced with nylon for ease of handling.The Bessey Clippix XCL Spring Clamp has the following specification: Opening: 55mmThroat Depth: 60mmWeight: 0.02kg (approx)
The Bessey Clippix XCL Spring Clamps are perfect for gluing, clamping and securing objects. With a needle nose design that offers extra throat depth. They feature soft, anti-slip, ergonomic handles that offer quick and easy one handed operation. The self-adjusting protective caps offer secure non-marking clamping. Manufactured from lightweight fibreglass that has been reinforced with nylon for ease of handling.The Bessey Clippix XCL Spring Clamp has the following specification: Opening: 70mmThroat Depth: 110mmWeight: 0.14kg (approx)
The Bessey VarioClippix XV Spring Clamps offer variable clamping force and are perfect for gluing, clamping and securing objects. They feature soft, anti-slip ergonomic handles that offer quick and easy one handed operation. The self adjusting caps offer secure, non-marking clamping. Manufactured from robust, lightweight, reinforced nylon for ease of handling.The Bessey XV3-50 VarioClippix XV Spring Clamp has the following specification: Opening: 55mmThroat Depth: 37mmWeight: 0.07kg (approx)
The Bessey VarioClippix XV Spring Clamps offer variable clamping force and are perfect for gluing, clamping and securing objects. They feature soft, anti-slip ergonomic handles that offer quick and easy one handed operation. The self adjusting caps offer secure, non-marking clamping. Manufactured from robust, lightweight, reinforced nylon for ease of handling.The Bessey XV5-100 VarioClippix XV Spring Clamp has the following specification: Opening: 100mm.Throat Depth: 50mm.Weight: 0.17kg.
The Bessey VarioClippix XV Spring Clamps offer variable clamping force and are perfect for gluing, clamping and securing objects. They feature soft, anti-slip ergonomic handles that offer quick and easy one handed operation. The self adjusting caps offer secure, non-marking clamping. Manufactured from robust, lightweight, reinforced nylon for ease of handling.The Bessey XV5-100 VarioClippix XV Spring Clamp has the following specification: Opening: 170mmThroat Depth: 50mmWeight: 0.19kg.
The Broadfix Levelling Shims have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber levelling shims. This also makes them more economical. They are colour coded depending on size, for easy identification.This Broadfix Levelling Shim ;Mixed Set contains four of the most popular shim styles: 30 x Standard U Shims 101 x 43mm. 70 x Small U Shims 55 x 43mm. 15 x Precision Wedge Shim 78 x 45mm. 45 x Flat Packers 100 x 28mm.
The Broadfix Flat Packers have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber flat packers. This also makes them more economical. They are colour coded depending on size, for easy identification. Sometimes referred to as a glazing packer or shim, and is a great multi-purpose shim. They are ideal for narrower shimming jobs. Stack to the required depth, slide in and you're done. The micro ridged surface prevents slippage under load.This Broadfix Flat Packers Mixed Set is supplied in a robust tub, that can be refilled with the bagged range once you run low. Has the following specification: Size: 100 x 28mm, Thickness: 1-6mm.Number of Pieces: 300.
The Broadfix Flat Packers have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber flat packers. This also makes them more economical. They are colour coded depending on size, for easy identification. Sometimes referred to as a glazing packer or shim, and is a great multi-purpose shim. They are ideal for narrower shimming jobs. Stack to the required depth, slide in and you're done. The micro ridged surface prevents slippage under load.The Broadfix Flat Packers Mixed Set supplied in a handy clam shell pack for easy storage. Has the following specification: Size: 100 x 28mm, Thickness: 1-6mm.Number of Pieces: 60.
The Broadfix U Packers have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber flat packers. This also makes them more economical. They are colour coded depending on size, for easy identification. The ever popular U-Shim is perfect for shimming behind a screw or fixing – loosely install the fixing, and then simply slide the required number of U-Shims over the fixing. The unique comb/clip prevents the U-Shims from falling out, which leaves both hands free to tighten up the fixing.Broadfix U Packer Mixed Bag contains the following: 140 x Small U Packers 55 x 43mm. 60 x Standard U Packers 101 x 143mm.
The Broadfix U Packers have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber flat packers. This also makes them more economical. They are colour coded depending on size, for easy identification. The ever popular U-Shim is perfect for shimming behind a screw or fixing – loosely install the fixing, and then simply slide the required number of U-Shims over the fixing. The unique comb/clip prevents the U-Shims from falling out, which leaves both hands free to tighten up the fixing.Broadfix U Packer Mixed Set is supplied in a robust tub, that can be refilled with the bagged range once you run low. Contains the following: 210 x Small U Packers 55 x 43mm. 90 x Standard U Packers 101 x 43mm.
The Broadfix U Packers have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber flat packers. This also makes them more economical. They are colour coded depending on size, for easy identification. The ever popular U-Shim is perfect for shimming behind a screw or fixing – loosely install the fixing, and then simply slide the required number of U-Shims over the fixing. The unique comb/clip prevents the U-Shims from falling out, which leaves both hands free to tighten up the fixing.The Broadfix Small U Packers come in a mix of thicknesses and are supplied in a handy clam shell pack for easy storage. Has the following specification: Size: 55 x 43mm.Number of Pieces: 100.
The Broadfix U Packers have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber flat packers. This also makes them more economical. They are colour coded depending on size, for easy identification. The ever popular U-Shim is perfect for shimming behind a screw or fixing – loosely install the fixing, and then simply slide the required number of U-Shims over the fixing. The unique comb/clip prevents the U-Shims from falling out, which leaves both hands free to tighten up the fixing.The Broadfix Standard U Packers come in a mix of thicknesses and are supplied in a handy clam shell pack for easy storage. Has the following specification: Size: 101 x 43mm.Number of Pieces: 60.
The Broadfix Precision Wedges are ideal for shimming in pairs for ultra precise incremental adjustment. They have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber flat packers. This also makes them more economical. They are colour coded depending on size, for easy identification. Wedge shaped shim with a distinctive serrated design which allows a pair of them to achieve a precise, level, non-slip thickness. The slot allows 2 of them to be placed around the fixing, facing each other, and then adjusted to the desired thickness. Size: Green, 78 x 45mm.Number of Pieces: 100.
Blackedge carpenters pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain. Available in three grades - Green (hard). For Hardwoods, Brickwork and Plastered wallsRed (medium). For General CarpentryBlue (soft). For Softwoods and newly felled timberCard of 12 Assorted pencils - Blue, Red & Green
Blackedge carpenters pencils have an oblong section which can be sharpened to a chisel shaped edge. This eliminates the tendency of a pointed pencil to follow the grain. Available in three grades - Green (hard). For Hardwoods, Brickwork and Plastered wallsRed (medium). For General CarpentryBlue (soft). For Softwoods and newly felled timberCard of 12. Medium (Red) Ideal for general carpentry use.
The Boa Aluminium Strap Wrench is the orginial and best strap wrench. Useful for many jobs including plumbing, automotive, A/C installation/maintence, pool, pond and oil filtres. Both strength and flexibility are provided by the braided rubber strap, which fits into a slot in the handle of the tool and provides a perfect fit on the work piece. Provides over 2,000lb of pressure without marking the workpiece with a pro use capacity of up to 305mm. Capacity: 10 (3/8in) to 275mm (11in).
The BOA Baby Boa Constrictor Strap Wrench is used for many plumbing jobs, on cars and irregular shapes and provides over 2,000lb of pressure without marking the workpiece. Both strength and flexibility are provided by the braided rubber strap, which fits into a slot in the handle of the tool and provides a perfect fit on the workpiece. Capacity: 100mm (4in).
The BOA Mini X Out will remove broken, damaged or embedded screws from metal, wood and ceramics. Made from high quality hardened steel, the Boa screw extractor fits all standard variable speed drills. Wood Screw Sizes: No.6-10.
The BOA Micro Grabit Kit is made from high quality hardened steel, fits all standard variable speed drills and will cleanly remove a variety of screws and bolts. Suitable for electronic, precision equipment and the medical industry. Removes: Wood Screws: 1.5-5mm, Bolts: 3-6mm
The BOA Rotary Thread Rescue 382 is the worlds only rotary thread restoration tool. Restores any damaged thread: Male, Female, right, left, inch, metric, pipe, in seconds. Suitable for a multitude of DIY uses including bicycles, auto, motorbikes, anything with a thread around the home and garage. Use with a drill, multi-tool or die grinder. Mini Rotary Thread File: Product Size 1.0cm diameter x 5cm long x 0.32cm.Shank Pitches: down to 28 TPI (0.8 metric).Fits: 1.27cm (1/2in hole).
The BOA Rotary Thread Rescue 752 is the worlds only rotary thread restoration tool. Restores any damaged thread: Male, Female, right, left, inch, metric, pipe, in seconds. Repairs any pitch thread. Replaces the need for kits, taps & dies, thread ploughs etc. Suitable for use in trade, commercial and home, use in workshops, agricultural, auto repair, machinery anything with a thread that you need to work on. Use with a drill, multi-tool or die grinder. Product Size: 2cm diameter x 5cm overall x 4.45cm reach x 6mm (1/4 inch) shank.Shank Pitches: down to 28 TPI (0.8 metric).Fits: 1.27cm (1/2in hole).
The Boa Constrictor Strap Wrench is the original and best strap wrench. Useful for many jobs including plumbing, automotive, A/C installation/maintenance, pool, pond and oil filters. Both strength and flexibility are provided by the braided rubber strap, which fits into a slot in the handle of the tool and provides a perfect fit on the work piece. Provides over 2,000lb of pressure without marking the workpiece with a pro use capacity of up to 160mm. Capacity: 10mm (3/8in) to 160mm (6.1/4in)
