The R.S.T. SitePro Fibreglass Tape features both metric and imperial or metric only measurements on a white blade. The blade is manufactured from 42 strand fibreglass which withstands high tensile stretching. It has 3x geared high speed winding mechanism all encased within an ergonomic case. It features a folding rewind crank which sits in the middle of the tape when not being used to avoid being damaged. A metal claw at the end of the tape allows you to grip into the ground or material for easy and accurate measuring.This R.S.T. SitePro Fibreglass Tape has the following specification: Blade Length: 20m/66ftBlade Width: 13mmAccuracy: EC Class II
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 8mm
Designed for clearing out mortar from between brickwork prior to pointing. The strong aluminium handle is contoured to fit the hand and squared off at the end. With 2 large hard-wearing wheels and replaceable point. Size: 8.1/2in x 3in
The Sievert Turbojet Single Burner 360° Swivel Torch has been developed for professional users and is 50% lighter than its predecessor with a piezo ignition for soldering and brazing. The burner can now be tilted in all directions, thanks to its cyclone flame, a rotating flame that wraps around tubes, providing extra smooth heat distribution. With a built-in pressure regulator. Connection Type: 1in US.
Everbuild EVBP16PIPE is a PVC pipe cement is a non-drip, thixotropic solvent based pipe cement and combines a long open time with a rapid rate of bond strength development. Conforms to BS26209. The Everbuild P16 product is designed specifically for the following applications. Bonding uPVC and ABS non-pressure pipes to themselves and each other, i.e. uPVC soil and ventilating pipes, fittings, and accessories conforming to BS4514; uPVC rainwater piping/goods conforming to BS4576; uPVC underground drainpipes and fittings BS4660; ABS or uPVC waste pipes and fittings conforming to BS55255. Size 250ml
ITL 9 Piece Insulated General Purpose Toolkit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC Supplied in a tool roll, contains: 1 x Snipe Nose Pliers 150mm (6in). 1 x Combination Pliers 200mm (8in). 1 x Cable Cutters 200mm (8in). 1 x Adjustable Spanner 200mm (8in). 1 x Slotted Terminal Screwdriver 3 x 75mm. 2 x Phillips Screwdrivers: PH1 x 75mm, PH2 x 100mm. 2 x Slotted Screwdrivers: 5 x 150mm, 6.5 x 150mm.
The Insulated Cable Croppers for cutting aluminium and copper cables only. They have injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 200mm (8in).
The Detail Roofing Kits feature a heavy-duty burner ideal for drying, bitumen laying and detail work on roofs, road works and other heat demanding applications like preheating before weldings, melting snow and ice etc. The kit comes complete with a 4 or 10 metre hose and a hose failure valve. The burner and steel neck-tube are fixed to the handle and are not interchangeable. Ideal for engineering and detailing work. Burner Diameter: 50mm.Heat Input: 86kW.Hose length: 10 metres.
Slip stones are designed specifically for sharpening the inside edge of lathe tools and gouges.These aluminium oxide stones cut rapidly and hold their shape perfectly.Type. MS14.Size. 100 x 25 x 11 x 5mm (4 x 1 x 7/16 x 3/16 in).Grade. Medium. With 1 round edge.
The Sievert HP Hose Assembly comes supplied complete with a connection nipple. It is suitable for use with Promatic Pro 86 and Pro 88 torch handles.Size 10 metre
This Marshalltown Masons Line is made from twisted nylon that has been heat set after winding to increase stability. Not affected by mortar, oil or mildew and will not absorb water. Suitable for staking out sites, concrete and landscaping layout and brick/block laying. Made in the U.S.A1 x Marshalltown M632 Masons Line 76.2m (250ft) - Fluorescent Yellow
The Hultafors Adjustable Plasterer's Square has millimetre and degree graduations that can be set in 4 fixed positions (22.5°, 45°, 67.5°, 90°). There is an additional 21 angles marked on the scale. The stock and blade are made from anodized aluminium. They can be folded together, making it easy to store and transport, and also be switched between right and left position. Specification: Blade Length: 900mm
This Hultafors BT5ME Big T Pocket Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 19mmAccuracy: EC Class I The Hultafors Big T Pocket Tape has a multitude of user benefits, designed for measuring more quickly, easily and reliably. It has an ultra-tough, wear-resistant steel blade. Accurate to EC Class I, offering the end-user the highest level of measuring accuracy available. Clear-view end-hook mounted below the blade allowing the blade to be read right up to the tip. The tough rubber protected case and patented shock absorber have been designed to survive heavy on-site use. Exact inside measurements are possible with the 100mm case size making add-ons easy with the mouth cursor showing the precise reading (the 5m model has a flip-out arm). It also has a unique snap-in, quick-release belt clip holster. Available with both metric and imperial graduations or metric only. Made in Britain.
The Hultafors CLP30 Chalk Line has a 30m line, metal crank and quick gear function 3:1. The housing is made from ABS plastic, has a big opening for refilling and a cap with bayonet joint and contains up to 100g of chalk. The line is braided cotton/polyester with high absorbing chalk capacity and considerable increased numbers of distinct lines - up to 10 lines. The crank is fitted with an ergonomic release button and knob. It can be locked in the open and closed position. The cap is secured by the hook, no line is left hanging loose. There is also a secure strap function.
Roughneck Mini Sledge Hammers with fibreglass handles are manufactured from drop forged alloy steel hardened and tempered, with 8-sided 45 degree chamfered precision milled faces. With an industrial grade epoxy for a longer lasting bond, solid core fibreglass handle with polypropylene cover and double injected TPR soft grip handle with integral overstrike protection. They have shorter fibreglass handles than the traditional Sledge Hammers, which make them ideal for use in places where a large swing cannot be taken or using a full length sledge hammer is not practical. They can easily be carried in tool boxes and tool bags.Roughneck Mini Sledge Hammer with Fibreglass Handle. Handle Length: 16inWeight: 1.4kg (3lb)
These Roughneck Traditional Wrecking Bars are made from drop-forged alloy steel, hardened and tempered steel and with polished tips and hexagonal shank.1 x Roughneck Wrecking Bar 300mm (12in)
IRWIN Vise-Grip Long Nose Pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. Long grip groove direction jaws provide maximum gripping strength whilst the moulded ProTouch grips provide extra comfort and less hand fatigue. Moulded 1 component handle that are comfortable, and feature pull-resistant handles. Cable cutter: up to 1.6 mm cables.Size: 200mm (8 in)
The IRWIN Vise-Grip Cable Cutter has an induction hardened cutting face and is made from chromium nickel steel for improved durability on the gripping and cutting face. Fitted with moulded 2-component handles. It can cut copper and aluminium cables up to 5mm in diameter.
IRWIN Vise-Grip Long Nose Pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. Long grip groove direction jaws provide maximum gripping strength whilst the moulded ProTouch grips provide extra comfort and less hand fatigue. Moulded 1 component handle that are comfortable, and feature pull-resistant handles. Cable cutter: up to 1.6 mm cables.1 x Visegrip Long Nose Pliers 150mm (6in)
IRWIN Vise-Grip combination pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. Machined multi-grip jaws for maximum gripping strength. Moulded ProTouch™ grips for comfort and less hand fatigue. 180mm (7in) and 200mm (8in) are high leverage handled.1 x IRWIN Vise-Grip High Leverage Combination Pliers 200mm (8in)
Record Irwin V175B Woodcraft Vice is designed for the user who requires a more robust vice which is permanently fixed. The main screw has a rolled 2-start acme thread which ensures a smooth strong action with the integral nut in the vice body. A top quality vice at an economical price.Boxed. Jaw Width: 175mm (7in).Jaw opening: 165mm (6.1/2in).
The RIDGID Inner-Outer Reamers have a hardened steel construction and are suitable for cutting copper and stainless steel tubing. They have 46 cutting edges on the interior cone that allow for fast, clean, inner reaming and outer deburring/bevelling of 1⁄4in (6mm) to 2in (50mm). The reamers have dual inch/metric measurement bars.RIDGID 223S EN Inner-Outer Reamer Capacity: 6 - 40mm (1/4 - 1.1/4in).Weight: 0.34kg.
The RIDGID 2017 Telescopic Basin Wrench has an innovative design that makes working with tap fittings and retaining nuts easier than ever. It has a built-in, water-resistant LED light, that provides direct illumination of your work, with auto-shut off for maximum battery life. The removable, 180° pivoting T-handle allows you easier access in tight spaces, whilst the 3/8in square drive connection lets you use your ratchet or breaker bar for additional leverage and maximum torque. The ergonomic, contoured grip overmold handle increases leverage and improves grip, while its new body/button design enables effortless telescoping, 240-425mm (10-17in). Specification Capacity: 12-32mm (1/2-1.1/4in).Length: 240-425mm (10-17in).Weight: 1.2kg (2.5lbs).
The Marshalltown Aluminium Plasterer's Hawk is made from heavy gauge hard-rolled aluminium with smooth straight edges, rounded corners and a 95mm (3.3/4in) flange with extended hub that is threaded for the handle. Fitted with a detachable 125mm (5in) DuraSoft® handle. Also supplied with a sponge rubber callous preventer.1 x Marshalltown M6D Aluminium Plasterer's Hawk DuraSoft® Handle 350 x 350mm (14 x 14in)
Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm(10in)Cut: hand bastardTanged
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 150mm (6in)Cut: flat smooth.Tanged.
This Bahco Pry Bar features both a crowfoot and precise end, both of which are useful for demolition work. Its short length makes it ideal for use in tight spaces. The bright orange finish is easy to spot on site.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 250mm (10in)Cut: hand smoothTanged
Bahco 1-106 series Hand files with Oberg cut are useful for all flat filing. The Oberg cut gives a high removal rate and smooth surface finish on most materials. The edges and surfaces are parallel. Surfaces single cut, bastard, with chipbreaking teeth. One edge single cut.Size 200mm (8in).
The Bahco 111M/SH5 is a set of 5 combination wrenches in metric sizes made from a high performance alloy steel in a patented U shape design. Their U shape shank provides better comfort with the open end angle being 15º with a slimmer head for better accessibility. The 12 point Dynamic-Drive Profile provides longer life for screws and nuts and the ring end angle is 15º for knuckle clearance and better grip. They have bigger and bi-directional size markings for easy identification and have a chrome plated Micro Matt finish which provides a high quality surface. Standards: ISO 691, ISO 7738, ISO 3318, ISO 1711-1 and DIN 3113. Sizes : 8, 10, 13, 17 and 19mm.
