Bahco Combination Pliers used for both holding and cutting. The jaws are slimmer than standard products, have smoothly rounded contours to provide maximum accessibility and have a phosphated and anti-rust protected finish. The handles of these pliers are designed to allow the vast majority of users to apply the greatest possible force with the least amount of effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand.These Bahco Combination Pliers have the following specification: Length: 160mm (6.1/4in).Jaw Length: 35mm.Cutting ;Capacity: ;Piano: 1.3mm, Hard: 1.7mm.Weight: 196g.
The Knipex Ear Clamp Plier is for simple and reliable mounting of 1-ear and 2-ear clamps (Oetiker system or similar). The head is made from high-grade special tool steel, forged and oil-hardened. Black atramentized finish with polished tips. Durable and strong, the press points on the clamp are extremely tough. Fitted with dipped plastic coated handles. The slim head permits good accessibility in confined areas. Versatile use, ideal for clamps on CV boots, cooler and fuel lines, air pressure systems, compressors. Length: 220mm
The ITL 29 Piece Insulated General Purpose Toolkit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC Supplied in a case, contains: 7 x Metric Spanners : 10, 11, 12, 13, 14, 17, 19mm. 7 x 1/2in Drive Metric Sockets: 10, 11, 12, 13, 14, 17, 19mm. 1 x 1/2in Reversible Ratchet. 2 x 1/2in Extension Bars: 125, 250mm. 1 x Coring Knife. 2 x 8in Pliers : Combination, Snipe Nose. 1 x 6in Diasgonal Cutting Pliers. 2 x 1/2in Drive Hex Key Sockets: 5, 6mm. 2 x Terminal / Slotted Screwdrivers: 3 x 75mm, 4 x 75mm. 2 x Slotted Screwdrivers 5 x 150mm, 8 x 150mm. 2 x Pozidriv Screwdrivers: PZ1 x 75mm, PZ2 x 100mm.
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument 1379 Testing Plug.Size: 150mm (6 in).Capable of sealing against pressures of up to 1.62 bar / 24 psi.
The Monument 2036T ;Olive Puller is ideal for removing olives from copper piping without damaging the attached pipe. Suitable for 15mm and 22mm copper pipe. This puller simply utilises the compression fitting locking nut to remove the olive from the tube. With all the major parts of the tool turned from brass, this olive puller provides a quick and reliable remedy to removing most olives. Made in Britain.
These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.Size 25mm
The screwdrivers in this Stanley module have black oxidised tips for increased durability. Their chrome vanadium steel bars resist bending and snapping and their bi-material tri-lobular handles increase torque and reduce slippage. The polypropylene handles feature a TPR overlay for comfort. Increased torque can be applied by using another bar through the hole. The set contains the following:3 x Flared slotted: 3 x 100mm, 6.5 x 150mm, 8 x 200mm.1 x Parallel slotted: 5 x 150mm.4 x Phillips: PH0 x 60mm, PH1 x 100mm, PH2 x 125mm, PH3 x 150mm. Designed to fit the Stanley roller cabinet range.
Stanley FatMax® Digital Levels are highly accurate, measuring to the nearest 0.10 degrees at level and plumb. It has 3 vials: horizontal, vertical and the digital vial. A buzzer sounds at 0°, 45° and 90°. The LCD screen features 180° readout, where the display flips in the upside down position to enable easier reading. The level has a recalibration function, allowing a 'false zero', a hold function and a mode function. It is able to measure in degrees (°), percentage (%) and mm/m. It has 2 milled surfaces and a magnetic base. Supplied with a water-resistant bag. Accuracy: Level and plumb: ±0.05.Other angles: ±0.10.The STA042063 Digital Level is 40cm in length.
Estwing's Pro-Claw Moulding Puller is made of fine tool steel, drop forged and tempered for extra durability. Its precision thin blade is perfect for removing moulding without damaging the wall. The slot in the blade is designed for removing small nails and brads. The other end has a popular Japanese nail puller with precise and sharp claws for removing imbedded nails or headless nails with ease and minimal damage. 1 x Estwing EMP300G Pro-Claw Moulding Puller 300mm (12in).
The Stanley Tools FatMax® magnetic level has a single-piece, aluminum box-beam structure for durability and accuracy with ergonomic, rubber over-molded hand grips and shock-absorbing end caps. Non-marring side bumpers help prevent damage to finished surfaces. It has 3 vials in total, with a MaxEdge™ bridged centre vial for continuous marking surface and durability. The block vials provide maximum accuracy of 0.5mm/m. Fitted with rare earth magnets that provide ultimate holding power on metal surfaces.1 x Stanley Tools FatMax® Magnetic Level 3 Vial 120cm
The Stanley FatMax® VDE Insulated Screwdrivers, which have VDE insulated tips individually tested to 10,000 volts and guaranteed to 1,000 volts. They are fitted with a soft grip handle that has been moulded directly to the bar to reduce fatigue and provide a virtually unbreakable bond. The heavy-duty plastic sheath running the length of the bar protects the user from live current. Contents: 3 x Parallel: 2.5 x 50mm, 3.5 x 75mm, 5.5 x 150mm. 2 x Phillips: PH1 x 100mm, PH2 x 125mm. 1 x Voltage Tester.
The Faithfull Plastic Debris Shovel is ideal for fast-moving of wood chips, rubble, farm waste, grain, compost, snow etc.This lightweight multipurpose shovel has a large impact-resistant plastic scoop with reinforcing ribs and deep sides. The plastic scoop does not create sparks when dragged across a concrete floor, making it a safe choice for use with flammable materials.Fitted with an FSC® European ash wood shaft and plastic D-handle. Specification:Overall Length: 1200mm (48in).Blade Size: 360 x 460mm.
Hultafors Set of 5 Scandinavian Butt Chisels which are ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic Deposition (EPD). They are an everyday chisel, sharp, reliable and always at hand. Comes with one of each size: 32mm, 25mm, 18mm, 12mm and 6mm. Each chisel is supplied in a ventilated ABS holster to protect the user and cutting edge during transportation.
The Matabi Construplus 7 Sprayer is specially developed for the construction industry. It is made from maximum strength materials and has Viton seals, PE filters and PP nozzles, which are suitable for use with many different chemical products. This versatile sprayer is suitable for many uses, including:ShutteringWaterproofingCleaningDescalingDegreasingMachinery maintenance. The sprayer is supplied with 2 nozzles. One nozzle has an elbow and is resistant to acids and strong chemicals. The other is a disc nozzle which is suitable for emulsions, oil emulsions and organic releasing agents. It also comes with a 0.42m extension and a 0.25m flexible tube. Specifications: Total capacity: 7 Litres.Working capacity: 5 Litres.Lance length: 0.58m.Hose length: 1.3m.
The Faithfull Junior Hacksaw is a compact value for money steel framed saw for cutting light materials and best suited for smaller general sawing where the work piece cannot be firmly secured. Replacement blades available. Blade length: 150mm (6in).Junior Hacksaw Blades, virtually unbreakable in normal use.Providing an efficient way to cut metal. Pack of 10 blades. 32tpi.
This Stanley module is designed to fit the Stanley roller cabinet range. It includes a pear head ratchet made from chrome vanadium steel with a bi-material handle. This set of 36 contains the following: 14 x 3/8in Drive Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21 and 22mm.13 x 3/8in Drive Deep Sockets: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21 and 22mm.6 x 3/8in Drive Torx Sockets: E4, E5, E6, E7, E8 and E10.1 x 3/8in Drive Ratchet.1 x Extension Joint: 125mm.1 x Universal Joint.
The BlueSpot Jumbo Hex Keys are manufactured from heat treated steel with a blackened oxide coating to protect against corrosion. The precise and chamfered ends fit smoothly into fastener heads to reduce wear. The long arm hex keys allow for increased reach and torque and are ideal for use in automotive environments. The set is supplied in a carrier which holds each key securely in a marked slot for rapid identification. The outer plastic case has a handle for easy storage and transportation. Contains the following sizes: 8, 10, 12, 14, 17 & 19mm
BlueSpot Flexible Ratchet Spanner with a 180 degree pivoting ratchet ring head. Manufactured from chrome vanadium steel. Heat-treated and nickel-plated for increased durability. Fully polished mirror finish. The 5 degree ratcheting increment makes it ideal for use in tight spaces. 72 teeth.1 x BlueSpot Tools 180 degree Flexible Head Ratchet Spanner 13mm.
The BlueSpot Broad Buddy Pocket Tape has an extra wide steel blade with easy-to-read metric and imperial graduations. With a rubberised, impact resistant case for increased comfort. Its rubber casing improves strength and durability, and it has a strong belt clip to keep it conveniently to hand. A powerful lock holds the blade in position.This BlueSpot Tools Broad Buddy Pocket Tape has the following dimensions: Blade Length: 10m/33ftBlade Width: 32mm
These KNIPEX 13 Series VDE Multifunctional Installation Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. The slim dimensions of these pliers enable easy access. Fitted with a bolted joint for precise, zero backlash operation of pliers. With 6 functions: -Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. -Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes. -Stripping holes for conductors of 0.75 - 1.5mm² and 2.5mm² -Crimp die for wire-end ferrules 0.5 - 2.5mm² -Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5mm² / dia. 15mm -Gripping, without opening the pliers completely (intelligent latching mechanism in the spring assisted version). The cutting edge remains closed and protected1 x Knipex VDE Multifunctional Installation Pliers 200mm
The Knipex 44 11 Series Internal Straight Circlip Pliers with dipped PVC handles. Used to assemble internal circlips into bores. With solid style forged, precision non slip tips. Made from chrome vanadium electric steel, oil-hardened. Polished head. 44 11 series of internal straight circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. The slim head style allows use in confined areas. Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade.Length 180mm (7 in).Bore size: 19 - 60 mm.
Ready to go 3 in credit card size diamond sharpener with convenient vinyl colour coded carrying case. Fits easily in pocket or wallet. Size 83 x 51mm.Blue Coarse
The popular Diafold Diamond Whetstone is now available with two grit combinations for the ultimate in sharpening versatility. For applications where a dull edge needs to be quickly restored, but a refined edge is required. Simply turn over to use the second grit. The length of the sharpening stone is 110mm.Grit. One Side Red Fine, other side Blue Coarse. (600 x 325 grit)Size 110mm.
The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption. Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.The FCM249G3 Sheathed Punch has the following specifications:Point diameter: 2.95mm.Length: 150mm.
The Norbar Pro Adjustable Dual Scale Torque Handle has been factory calibrated to plusmn;3%. A newly designed mechanism ensures the accuracy is retained for longer. The secure push/pull locking mechanism is quick and intuitive to use and prevents accidental adjustment. There is also a large scale window and long scale length for great visibility and accurate setting. The ergonomic handle features a high proportion of soft-feel, high grip material. Both the handle material and lens resist all chemicals in common automotive, industrial and aviation use. Supplied with a Calibration Certificate, which meets the requirements of ISO 6789-2:2017. This Norbar Pro Adjustable Dual Scale Torque Handle has the following specifications: Drive: 16mm Spigot.Range: 60-300Nm (44-222 lbf.in).Length: 569mm.Weight: 1.17kg.
Imperial 13in lengths of high carbon bright steel, precision ground to very close tolerances; Above 1 in + - 0.0005in.Below 1 in + - 0.00025in. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 7/8 in
The Norbar Professional Torque Wrench is factory calibrated to plusmn;3% and our new mechanism ensures the accuracy is retained for longer. A large scale window and long scale length provide great visibility and accurate setting. The secure push/pull locking mechanism is quick and intuitive to use and prevents accidental adjustment. Fitted with an ergonomically designed handle (high proportion of soft-feel, high grip material). The handle and lens resist all chemicals in common automotive, industrial and aviation use. Supplied with a Calibration Certificate, which meets the requirements of ISO 6789-2:2017. This Norbar Pro Torque Wrench has the following specifications: Drive: 1/4in Square.Range: 3-15Nm (27-132 lbf-in).Scale Increments (N middot;m): 0.1Nm (1lbf middot;in).Ratchet Type: Reversible.Length: 221mm.Weight: 0.26kg.
The Irwin® Quick-Grip® Wide Pads change your standard clamp pads to wide pads for wider distribution of clamping pressure. The pads are double the width of standard pads. Compatible with all Quick-Grip® heavy-duty and medium-duty and one-handed bar clamps.
Knipex 68 01 Series End Cutting Pliers with dipped PVC handles. They are made from high-grade special tool steel, forged and then oil-hardened for reliability and durability. With cutting edges hardened approximately 61 HRC, these pliers will help make light work on annealed tie wire used on reinforced rods or braided reinforced concrete mesh.These Knipex End Cutting Nippers have the following specification: Length: 160mm. (6.1/4in).Cutting Capacity: Hard: 2.3mm, Medium: 2.8mm, Soft: 4.0mm.
Bahco 90 Series Phosphated Finish ERGO™ Adjustable Wrenches with a unique reversible jaw and comfortable thermo plastic handle and larger grip width. In one position it is a conventional adjustable wrench, but with the jaw reversed it becomes a serrated jaw pipe wrench.Size : 150mm (6 in).Jaw Capacity 21mm
