R.S.T. Gauging trowel with a traditional wooden handle and carbon steel blade. Used primarily for mixing and applying small quantities of cement. Size: 180mm (7in).
Marshalltown 19 Series Leather handled Philadelphia pattern brick trowel with the blade being manufactured from a single piece of high grade steel, tempered and taper ground with a straight post and carefully set handle angle. The handle is securely attached with a polished steel ferrule, straight shouldered Philadelphia pattern blade. These trowels have been re-engineered and are produced on the most modern forging equipment available. The impact area is strong to provide extra endurance, the flexibility produces the unique feel of Marshalltown brick trowels, straight shouldered Philadelphia pattern bladeLeather handle. Size. 300 x 150mm (12 x 6 in)
The R.S.T. Open Frame Geared Tape with a white, heavy-duty fibreglass blade which is corrosion resistant and hard-wearing. This tape has an easy grip winding handle with a 3:1 rewind ratio return. This tape has a colourful design making it easy to recognise. The claw at the end of the blade is ideal for wedging into material to keep the end secure, enabling you to read an accurate measurement. Available with metric only or metric and imperial measurements.This R.S.T. Open Frame Geared Tape has the following specification: Blade Length: 50m/165ftBlade Width: 13mmAccuracy: EC Class II
The RUBI SWEEPEX SUPERPRO Sponge is made of flexible polyurethane with a polyester base with added SUPERPRO advantages. These sponges feature a more abrasive, resistant side (orange) and a lower degree of absorption. Perfect for cleaning surfaces that need greater friction power. Not recommended for use with acid-based products.Specifications:Size: 18 x 10 x 7cm.Resistance to Abrasion (1-4): 3.Absorption Level (1-4): 3.
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument 1378Z Drain Testing Plug. Size: 100 mm (4 in).Capable of sealing against pressures of up to 1.97 bar / 29 psi.
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument 1379 Testing Plug.Size: 150mm (6 in).Capable of sealing against pressures of up to 1.62 bar / 24 psi.
The Hultafors Quattro Bevel Square is an innovative adjustable square which also functions as a bevel square and an angle finder. The rotatable blade features fixed positions for 45 degree, 90 degree, 135 degree (180 degree, 225 degree and 270 degree). By rotating the blade more than 180 degree the opposite side of the stock where there is no slit can be used - for example, to provide a straight edge thin sheet metal cannot slide into. By shifting the lever, the Quattro can also be used as a bevel square to copy any angle between 0 and 270 degrees. A lever allows you to lock it at whatever angle you like. There is a scale on both the blade and handle to measure angles between 0 and 90 degrees. The square is also completely foldable, which makes it easy to store and carry in the pocket. The blade is 45mm wide to accommodate work with standard stud dimensions and has a centre line making it easy to quickly mark out both sides of a stud. It also has scribing notches, spaced 5mm apart, which can be used to draw or cut a line parallel along an edge. A robust joint and a 2 cm long blade of 1mm thick, high-strength stainless steel provides a very durable design withstanding tough working environments, and will last a long time. Carefully selected materials and manufacturing techniques such as a CNC-milled stock and a blade cut with a precision laser provide high accuracy; angle tolerance ±0.06 degree (±1 mm/m).
The Starrett Fractional Display Caliper is lightweight, comfortable, and easy to use. Made from hardened stainless steel, it has a slim profile and a clear LCD display, reads 0.01mm, .0005in or 1/64in. The display includes function buttons for zeroing and unit switching (mm, inch, F). A fine adjustment thumb wheel allows for easy measuring and a lock screw to secures the slide position. To save battery life it has an auto-off after 5 minutes. It also features a low battery warning system with flashing display and a USB port for data output. Comes with: a battery cover wrench for easy access and a hardwearing case. Conforms to DIN862 standard. Specifications: Power: Single SR44/LR44 Long-life Battery.Max. Measuring Speed: 1.5m/sec or 60in/sec.1 x Starrett Fractional Display Caliper 200mm.
Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There is a locking device on all sets.Millimetre Reading Gauges with Straight leaves 12.7 x 77 mm No. of leaves: 20 Range 0.05 - 1 mm (by 0.05mm steps)
This Thor 27-42000 Square Solid Brass Mallet. Manufactured from extruded Brass rod. Provides a firm blow without the risk of damage to expensive components. Fitted with a durable wooden handle.Ideal for positive blows on highly finished or closely ground machined parts throughout the Aircraft, Automotive or Shipping Industries. Also used by tool and gauge makers and for bearing assembly in heavy industrial applications such as earth moving equipment, shipping, locomotive assembly etc.NOT recommended for non-sparking applications.Specifications:Weight: 2000gFace: 44mm (1 3/4in) SquareHead Length: 114mm (4 1/2in)
Thor Replacement white super plastic split head faces are special shaped and manufactured from ultra-high molecular weight polythene which will not fracture, splinter or delaminate on use. The Ultra-high molecular weight Polythene when fitted into Malleable iron heads provide high impact, durability and high abrasive resistance. These faces can be used as an alternative to Rawhide.For use with size 3 Thor split head hammers .Face diameter 44m (1 3/4 in)
Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.Size: 2. Weight 170g (6oz).Diameter 38 mm (1 1/2 in).
Tubtrugs feature strong handles and extreme flexibility that make it easier to handle than any average bucket or trug. They are frost proof, UV resistant and come in a variety of different sizes and colours depending on your preference.
Colour: Sky blue Size: Medium
IRWIN Vise-Grip Long Nose VDE pliers have a chrome nickel steel, induction hardened cutting edges that stay sharper for longer and improved durability. Machined jaws provide maxium grip strength. They are fully TÜV, GS, and VDE certified meaning they are safe for working with electrical equipment upto AC 1000 volts or DC 1500 volts. Featuring moulded, pull-resistant, one component handles for added comfort and less hand fatigue.Length: 200mm (8 in).
Best quality hardwood stocks with blued spring steel blades.Brass faced to ensure accuracy and to provide protection against damage.The blade is securely fixed in place by solid rivets for long lasting durability.Size. 12in - 300mm.
These Dormer 2 piece sets each feature a tap and its corresponding pre-hole drill in one convenient package, helping to save time and error.The packs contain an A002 split-point jobber drill and a straight flute tap. The taps are suitable for threading up to 1.5x their diameter in most materials (ISO Standard). Two tap options are available: Second tap for through drilling, or a bottoming tap for blind holes.Specifications: Tap Type: SecondThread Size: M6
This BlueSpot Telescopic Magnetic Pick Up Tool is fitted with a soft grip handle for increased comfort. The telescopic shaft extends from 150mm to 685mm. Fitted with a ;high strength magnet for a secure hold, with a maximum magnetic lift of 2.25kg (5lb). It also features a handy pocket clip for convenient carrying.
The BlueSpot Straight Cut Aviation Tin Snips are ;specially designed to cut through aluminium, sheet metal, leather, tiles, rubber and shingles. Manufactured from drop forged carbon steel and heat treated for increased durability. With a serrated lower jaw to prevent slips. They use a compound leverage for maximum cutting power and can cut up to 18 gauge steel. Fitted with soft grip handles for increased comfort and a lever lock for safe storage.
Bahco Dovetail Saw for use on wood and plastic materials. Fine universal hardpoint toothing and light steel back for rigidity. The flexible version has a handle which swings to allow both left and right hand sawing where access is restricted. Blade Length: 250mm (10in).Right Hand SawTeeth 13 tpi
The Roughneck Fencing Pins have a top hook for securing rope or hazard tape when marking off areas where work is in progress or where general access is restricted. They are fully painted black to protect against rust. The tips are hardened for use in hard ground.10 x Roughneck Fencing Pins 9mm x 1200mm
The Roughneck E-Z Read® Tape Measure is a premium grade product designed with the professional in mind. The outer casing is manufactured from a non-slip, shockproof rubber and is further complimented with a strong metal belt clip and powerful blade brake. The rustproof blade is nylon coated for maximum durability, with metric and imperial graduations and is fitted with a 3 rivet reinforced end hook. E-Z Read® blades, where every 1/8in is marked for easy reading, stud marking every 16in and truss marking every 40cm.This Roughneck E-Z Read® Tape Measure has metric and imperial graduations. Blade Length: 3m/10ftBlade Width: 16mm
Faithfull Professional quality hexagon keys made from fully hardened chrome vanadium steel. All keys from 4mm (5/32in) have chamfered edges to prevent damage to blade and fittings. All keys 3mm (1/8in) and above are marked with their size.Size.7/64in. AF.
The Wiha SoftFinish electric slimFix Slotted Screwdrivers come with a high quality Chrome vanadium steel blade, through hardened with a black-finish. Insulation is moulded directly onto the blade. Individually tested at 10,000 V AC and approved for 1,000 V AC.Patented SoftFinish handle ensures work is kind to hands and muscles. Recommended by doctors and therapists at the German Campaign for Healthier Backs. slimFix handles have been specially developed for electric applications, blades are up to 33% slimmer. The unique Wiha handle-length concept provides optimum balance of torque and control. Manufactured according to IEC 60900.1 x Wiha SoftFinish electric slimFix Screwdriver Slotted 4.0 x 100mm.
The ITL Torque Wrench is fully insulated with a unique injection-moulding process. Its Ovi-Grip handle provides superior comfort and includes an integral increment gauge for accuracy. Torque range is achieved in clockwise and anticlockwise directions via a unique removable drive core.1 x ITL Insulated Torque Wrench 1/2in Drive 20-100Nm.
Bahco Professional Mitre Handsaw for cutting plaster and boards of a wood based material. With a two-component handle which ensures a comfortable and safe grip. Specially developed toothing with new super sharp GT-toothing for the first 100mm (at the tip), followed by groups of four teeth with an extra large gullet between groups for greater efficiency and minimised clogging. Blade Length: 500mm (20in).Teeth: 9 tpi.
Stabila 96-2 Extra strong double plumb ribbed box section levels are made from an extra strong light metal rectangular profile with gripping ridges and removable end-caps made from two materials. The removable end-caps are also equipped with well-proven patented anti-slip stops. Has 2 vertical vials, 1 horizontal vial, and 2 milled measuring surfaces on levels up to 120cm. Levels over 120cm do not have milled surfaces. Measurement accuracy: in normal position 0.029° = 0.5 mm/m. Overhead measurement 0.043° = 0.75 mm/m.Stabila 96-2-40 Level 3 Vial. Length: 400mm (16 in).
The Stabila Series 80U-2 Spirit Level has a rectangular aluminium profile with a powder coating that protects sensitive surfaces. The spirit level is easy to clean due to its smooth surfaces and an electro-static powder coating in anodised colour. There are two vertical vials for quick and easy reading in any position, and one horizontal. The levels are firmly fitted with impact-resistant plastic end caps. The patented STABILA vial system ensures long-lasting accuracy and offers precise measurement even for heavy-duty tasks. Especially for carpenters and cabinet makers, electro installers, tilers, and plumbers. Perfect measuring tool for DIY. Specification Normal Position Accuracy: ±0.5 mm/m.Overhead Position Accuracy: ±1.0mm/m.3 Vials: 1 Horizontal and 2 Vertical.Measurement: 1 Coated Measuring Surface.Stabila 80U-2 Spirit Level 3 Vial 18790 Length: 120cm (48in).
The STANLEY FATMAX® XTREME™ Box Beam Level has been designed to provide durability and accuracy, providing you with the performance you need for every job. The patented continuous edge enables the ability to draw or scribe uninterrupted lines along the full length of the level. Whilst its fine milled primary edge provides 0.5mm/m accuracy, with a secondary edge accuracy of 0.8mm/m. Fully secured vial technology is designed to protect the vials against drop damage, while the 90% larger plumb vial provides an easier-to-see bubble for better visibility. The shock absorbing end caps are rubber moulded to protect the level from drop damage and feature raised anti-slip surface protectors to help protect against slipping and surface marking. Additionally, the end caps can be removed, making 90-degree markings and corner lines easier and more accurate. Strategically placed finger grab rails and wrap around handed grips are also incorporated for easier one handed use and better ergonomic design.
1 x STANLEY® FATMAX® XTREME™ Box Beam Level 60cm
The Bosch D-TECT 200 C Professional Wall Scanner detects all common objects and illustrates them clearly, while making documentation easy. Equipped with Bosch Radar Technology and an improved user interface. Multiple views allow for conveniently choosing the best option for different applications, such as Spot View, making detection in hard-to-reach locations especially easy. To provide solid evidence, the wallscanner´s innovative screenshot feature enables quick documentation. The D-TECT 200 C Professional supports both indoor and outdoor jobs, prevents damage during drilling, and measures concrete coverage. Supplied with: 1 x Battery Adaptor, 1 x USB-C Cable, 1 x Hand Strap, 4 x AA 1.5 V LR6 Batteries and 1 x Pouch. Specifications: Max. Detection Depth: 200mm.Max. Dry Concrete Detection Depth: 200mm.Max. Early Age Concrete Detection Depth: 60mm.Max. Detection Depth in Other Wall Types: 80mm.Max. Wooden Substructures Detection Depth: 38mm.Accuracy: ± 5mm.Power Supply: 12V Li-ion or 4 x AA Batteries.Dust and Splash Protection:IP5XWeight: 0.7kg.
This Norbar Industrial Torque Wrench has the following specification: Drive: 3/4in SquareRange: 120-600Nm (100-450 lbf·ft)Ratchet Type: Push ThroughLength: 954mmWeight: 5.95kg
The Norbar Model 5 Torque Wrench is highly accurate with interchangeable 1/4in hexagon bits. (ISO 1173:1988 Form C drive bits). The Model 5 is non-length dependent, and remains accurate regardless of hand position. Supplied in a storage case that allows space for the storage of additional drive bits and optional stepless ratchet. Comes with a declaration of conformance to ISO 6789:2017. Specification Drive: 1/4in Female Square. Range: 1-5Nm. Torque Radius: 101.6mm.Ratchet Teeth: None.Ratchet Type: Stepless.Length: 170mm.Weight: 0.12kg.
The Norbar Professional Adjustable 'Mushroom' Head Torque Wrenches are fitted with Norbar’s ‘Industrial’ style of ratchet. Using the principle of ‘offset pawls’, these ratchets feature a robust tooth pattern and a narrow engagement angle, meaning that the wrench is easy to use in tight spaces. The square drive features a finger grip on the top (the ‘mushroom’ head) that assists with running down the nut until resistance is met. The square drive can also be removed and replaced in the opposite direction so the wrench can give torque control in both the clockwise and anti-clockwise directions. The ‘Industrial’ ratchet is specifically designed for torque wrench application and provides users with the perfect combination of strength, versatility and ease of use. Factory calibrated to ±3% and the new mechanism ensures that the accuracy is retained for longer. They have a new ergonomic handle with a high proportion of soft-feel, high grip material. Both the handle material and lens resist all chemicals in common automotive, industrial and aviation use. There is a secure push/pull locking mechanism that is quick and intuitive to use and prevents accidental wrench adjustment. They are fitted with a large scale window and long scale length for great visibility and accurate setting. Unique on a torque wrench, the Timestrip® gives a visual indication that the wrench is due for re-calibration. Every wrench is supplied with a declaration of conformance of ISO 6789:2017 and in a sturdy plastic case.Norbar Pro 300 Adjustable 'Mushroom' Head Torque Wrench 1/2in Drive 60-300Nm Part Number: 15005.Accuracy: ±3%.Operates Between: 60-300Nm/50-220lbf ft.Square Size: 1/2in.Ratchet Teeth: 60.Ratchet Diameter: 51mm.Length: 593mm.Weight: 1.42kg.
The Norbar Professional Adjustable 'Mushroom' Head Torque Wrenches are fitted with Norbar’s ‘Industrial’ style of ratchet. Using the principle of ‘offset pawls’, these ratchets feature a robust tooth pattern and a narrow engagement angle, meaning that the wrench is easy to use in tight spaces. The square drive features a finger grip on the top (the ‘mushroom’ head) that assists with running down the nut until resistance is met. The square drive can also be removed and replaced in the opposite direction so the wrench can give torque control in both the clockwise and anti-clockwise directions. The ‘Industrial’ ratchet is specifically designed for torque wrench application and provides users with the perfect combination of strength, versatility and ease of use. Factory calibrated to ±3% and the new mechanism ensures that the accuracy is retained for longer. They have a new ergonomic handle with a high proportion of soft-feel, high grip material. Both the handle material and lens resist all chemicals in common automotive, industrial and aviation use. There is a secure push/pull locking mechanism that is quick and intuitive to use and prevents accidental wrench adjustment. They are fitted with a large scale window and long scale length for great visibility and accurate setting. Unique on a torque wrench, the Timestrip® gives a visual indication that the wrench is due for re-calibration. Every wrench is supplied with a declaration of conformance of ISO 6789:2017 and in a sturdy plastic case.Norbar Pro 340 Adjustable 'Mushroom' Head Torque Wrench 1/2in Drive 60-340Nm Part Number: 15006.Accuracy: ±3%.Operates Between: 60-340Nm/50-250lb.ft.Square Size: 1/2in.Ratchet Teeth: 60.Ratchet Diameter: 51mm.Length: 685mm.Weight: 1.48kg.
