The RIDGID® Micro IR-200 Non-Contact Infrared Thermometer provides simple, quick and accurate surface temperature readings at the push of a button. Simply squeeze the trigger and point the ultra-sharp dual class II lasers at the surface being measured. Ultra-Sharp Dual Class II Lasers easily identify the surface area being measured. Has a 30 to 1 Distance To Spot Ratio, this allows you to take more accurate measurements from a farther distance. With adjustable emissivity to accurately measure the temperature of virtually any surface. Uses audible and visual, high and low alarms to quickly alert user to temperatures outside of the ranges that are set. It has a bright backlit display which can be toggled on in poorly lit areas and can be mounted on a tripod for repeatable, precise temperature measurements. Specification Temperature Range: -50 to 1200°C (-58 to 2192°F),Distance To Spot Ratio: 30 to 1.Response Time: <150ms.Temperature Display: Current Temperature & MAX Temperature.Measurement Units: Fahrenheit & Celsius.Power Source: 1 x 9 Volt Battery (Included).Weight: 0.20kg.
Faithfull FSC Carpenters Sliding Bevel for marking out, checking and transferring angles. The blued spring steel blade can be set to any angle and locked in position by means of a brass wing nut. The quality hardwood stock is finely machined and shaped with brass end caps. This product is made with FSC® 100% Certified Wood from well-managed forests.
1 x Faithfull FSC Carpenters Sliding Bevel 270mm (10.1/2in)
The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption. Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.The FCM249G2 Sheathed Punch has the following specifications:Point diameter: 1.95mm.Length: 140mm.
Estwing E239 Roofers pick hammer is designed for the roofing trade. It has a spike for making a hole in the slate, a claw for extracting old nails and a magnetised head for starting nails accurately. The hammer is made from solid steel with a genuine leather grip. Made in the USA.Smooth faceLeather gripWeight 620g (1lb 6oz)
The Faithfull Clamp Heads are a low cost alternative to full size bar clamps, these clamp heads can be easily fitted onto any length of wooden batten with a cross section of 50 x 25mm (2 x 1in). Supplied complete with fixing pins that enable quick, easy and accurate setting of the clamp.A light-duty clamp, as long and as strong as the timber used, is quickly produced by drilling 2 holes to accomodate the clamp heads. Ideal for clamping large objects such as doors and window frames.
The Wiha SoftFinish electric Screwdrivers come with a high quality Chrome vanadium steel blade, through hardened with a black-finish. Insulation is moulded directly onto the blade. Individually tested at 10,000 V AC and approved for 1,000 V AC.Patented SoftFinish handle ensures work is kind to hands and muscles. Recommended by doctors and therapists at the German Campaign for Healthier Backs. The unique Wiha handle-length concept provides optimum balance of torque and control. Manufactured according to IEC 60900. This 6 Piece Set contains the following: 4 x Slotted Screwdrivers: 2.5 x 75mm, 3.5 x 100mm, 4.5 x 125mm & 5.5 x 125mm2 x Pozidriv Screwdrivers: PZ1 x 80mm & PZ2 x 100mm.
Guillotine type heavy-duty roof slate tile cutter of 210mm (8.1/4in) capacity. Designed to cut slates up to 7mm (9.3/2in) thick. The frame is fitted with a mounting hook for fixing to lathes or a bench.
The Faithfull Die Holders are used for securely holding round dies for the clean cutting of external threads. The body and ends are black powder-coated, with each end knurled for a comfortable non-slip grip.Size: 25.4mm (1 in)
Baileys Lockfast rods can be rotated in either direction and will remain secure in the most demanding conditions. The rods are manufactured from high grade polypropylene, complete with solid brass joints. The set contains the following: 10 x 3/4 in x 3ft Blue Rods.2 x 12 in Straps.1 x 4 in Plunger.1 x 2 in Double Worm Screw.
Thor deadblow hammers have coated die-cast aluminium alloy head with rubber grip and screw-in white nylon or brown polyurethane faces. Available in 5 different weights. The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force. Thor deadblow hammers are ideal as a multi-purpose striking tool and are ideal for sustained and effective blows without recoil. They are commonly used in most assembly / fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.Replacement faces are available.Diameter 38mm (1 1/2 in).Weight 700g (1 3/4 lb).
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size: 3.Weight 1650g (3 1/2lb).Diameter 44mm (1 3/4 in).
All purpose replacement screw-in white nylon faces which will not mark finished surfaces. For light and heavy assembly work.For use with Thor nylon hammers THO710 and THO1010. Diameter: 32 mm (1 1/4in).
Metric 333mm lengths of high carbon bright steel, precision ground to very close tolerances; Above 25mm + - 0.025mm.Below 25mm + - 0.0127mm. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 30mm
Faithfull heavy-duty crowbars, manufactured from high-grade heat-treated steel bar. Ideal for levering heavy objects, wrecking work and digging, the pinch point end allows easy penetration when breaking hard ground.1 x Faithfull Chisel & Point Crowbar 28mm x 1.5m
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-267 FatMax® Thru Tang Chisel is 50mm (2 inches) in width and 165mm in length
This Stanley FatMax® Moulding Bar is manufactured from spring steel for durability with a high visibility powder coated finish and polished tips. With polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim reducing material damage. The non-slip grip provides increased leverage.
The STANLEY FATMAX 2-in-1 Multi Tacker is perfect for multiple professional applications including fixing drywall beads and scrim to plasterboard, securing carpets, fencing and roof sheeting. It features an anti-jam mechanism for continuous use and reliable operation, as well as a high and low power setting to control the intensity of the staple application.Specification:Fires: STANLEY Type-G Staples in 6-14mm and STANLEY Type-J Headed Brad Pins in 12-15mm.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 300mm (12 in)Cut: flat second.
Tapered half round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size: 150mm (6in)Cut: half round smooth.Tanged.
The Estwing Nail Puller is made of fine tool steel, drop forged and tempered for extra durability. Both nail puller claws are precise and sharp to remove embedded or headless nails with ease and minimal wood damage. The head is slightly rounded to give you improved leverage and the precision thin claw design enables you to get into hard to reach places.
The Bahco BAHCOFIT Hex Ball End screwdrivers are suitable for hexagonal head screws. They are ball ended to allow easy insertion in to the screw head from a range of angles. This is more efficient and time saving compared to a standard hex tip. The screwdrivers have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. Their blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification.Specifications: Tip size: 5.0mm.Blade length: 100mm.Total length: 195mm.
Bahco 434 Series Bevel Edge Chisel developed according to the scientific ERGO™ process. Has a two component grip, splitproof handle allows repeated hammer blows and the blades are manufactured from hardened and tempered steel, which are precision ground for maximum sharpness and long lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with A safety guard and have rounded shoulders for added safety.Size: 10mm.
Bahco 434 Series Bevel Edge Chisel developed according to the scientific ERGO™ process. Has a two component grip, splitproof handle allows repeated hammer blows and the blades are manufactured from hardened and tempered steel, which are precision ground for maximum sharpness and long lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with A safety guard and have rounded shoulders for added safety.Size: 18mm.
SB-3732 series nail punches are manufactured with a plastic handle and fully polished steel surface with a brilliant chrome finish.Tip size: 4.0 mm (5/32in). Length: 125 mm (5in).
Tapered half-round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 100mm (4in)Cut: half-round second.Tanged.
The Bahco High Resistance Quick Clamp features a quick-release system for ease of use and will hold the maximum clamping force for at least one hour. The reversible jaw mechanism can be converted from clamp to spreader. Clamping Capacity: up to 80kgThis Bahco High Resistance Quick Clamp has the following specification: Jaw Width: 300mmJaw Depth: 64mmOverall Length: 475mmClamping Capacity: up to 80kgPack Quantity: 2
Bahco Insulated Phillips Screwdrivers are suitable for work on live equipment, up to 1,000 Volts. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The blades are made from high performance alloy steel, which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver is branded with part number, tip symbol and size for easier identification. They are each individually tested and manufactured according to IEC 60900 and conform to ISO 8764.Specifications: Tip: PH1.Blade length: 80mm.Total length: 185mm.
The Bahco BAHCOFIT Slotted Parallel Tip screwdrivers are suitable for slotted head screws. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The screwdrivers' blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification. Manufactured to ISO 2380 / DIN 5264 standards.Specifications: Tip: 5.5 x 1.0mm.Blade length: 300mm.Total length: 405mm.
Bahco Bent Snipe Nose Plier with ERGO™ handles for comfort. The tips angled at 60°, and slim, semi-circular shaped serrated jaws. Accurately machined jaws provide a sure grip on the workpiece. Tips give good grip and improved accessibility in confined spaces. Sharp edges for cutting softer material such as copper wire and plastic insulated wire. Equipped with return spring with on/off function. SpecificationLength: 160mm (6.1/4in).Jaw length: 46mm.Weight: 170g.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 150mm (6in)Cut: hand secondTanged
Bahco Chalk Powder is suitable for use with Bahco chalk line as well as other makes. The chalk is available in blue, red, white and yellow. Weight: 227g.The BAHCLYELLOW chalk powder has the following specifications:Colour: Yellow. Weight: 227g.
Bahco spare part kits for the adjustable wrench 80 and 90 Series, this set contains roll, pin and a spring. They are left-hand screw. Finish: Phosphated.
This Faithfull Long Arm Hex Key Set contains a selection of professional quality keys made from fully hardened Chrome-Vanadium steel. All keys from 4mm have chamfered edges to prevent damage to blade and fittings. Long arm design allows access to deep set screws or difficult to reach places. The handy storage caddy ensures that the key set can be safely stored in pockets and toolboxes. The key sizes are clearly shown on the caddy. Metric Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
The Stanley FatMax® VDE Insulated Voltage Tester has an insulated plastic handle for complete safety. Its blade is made from chrome vanadium steel for long life. Tip: Parallel 3 x 65mm.
The RUBI SC200 Vacuum Suction Cup has been specially designed for handling large and heavy tiles. Adapts to any surface finish. It has a high-resistance chassis, made of a technical polymer, and an ergonomic handle to increase comfort and safety when handling large ceramic tiles. The handle design also reduces the risk of unintentionally deactivating the suction cup.Suction is applied by manual vacuum pump. Easily activated with a single finger and is equipped with a safety mark that indicates the loss of suction and reminds us of the need to pump again to retain the vacuum charge in the suction cup. It also features a manual pressure release valve, to easily remove the suction cup from the manipulated material.All RUBI suction cups have been subjected to constant quality tests to ensure and guarantee their correct resistance during use. At RUBI we have always been concerned about the health of the professional.Specification:Max. Load Capacity: 110kg.
