These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.The Faithfull FAICHCUT40Z Zinc Plated Chain has the following specifications:Size: 4.0mm x 2.5mFinish: Zinc
The Faithfull 6mm Staple on a 50 x 50mm (2 x 2in) pre-drilled plate. Multipurpose product for use with lengths of chain, to provide security on sheds, shutter doors, gates etc..This ;Faithfull Staple On Plate has a Galvanised ;finish for increased durability.
The Faithfull Fire Brigade Snap Hook is designed for the quick release and attachment of ropes and loops. This hook has a spring-loaded return mechanism, which allows it to be used where a quick but secure fixing is required. Chain accessories should never be used for any overhead lifting, load binding or towing applicationsThis Faithfull Fire Brigade Snap Hook has the following specifications: ; Link Diameter: 6mm. ;Length: 60mm. ;Finish: Stainless Steel. ;Quantity: 2.
This Energizer® LED Candle Non-Dimmable Bulb has the following specification: Fitting: SES (E14)Input Wattage: 3.4W (25W equivalent)Lumens of Light: 250 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 35 x 110mmDimmable: NoRated: A+
This Energizer® LED Golf Non-Dimmable Bulb has the following specification: Fitting: ES (E27)Input Wattage: 5.9W (40W equivalent)Lumens of Light: 470 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 45 x 87mmDimmable: NoRated: A+
This Energizer® LED GLS Filament Dimmable Bulb has the following specification: Fitting: ES (E27)Input Wattage: 7.2W (60W equivalent)Lumens of Light: 806 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 60 x 109mmDimmable: YesRated: A+
This Energizer® LED GLS Filament Non-Dimmable Bulb has the following specification: Fitting: BC (B22)Input Wattage: 4.3W (40W equivalent)Lumens of Light: 470 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 60 x 109mmDimmable: NoRated: A+
This Energizer® LED Opal GLS Non-Dimmable Bulb has the following specification: Fitting: BC (B22)Input Wattage: 12.5W (100W equivalent)Lumens of Light: 1521 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 60 x 117mmDimmable: NoRated: A+ Supplied as a Pack of 4.
The Rapid R83 is an ergonomic, high-capacity tacker for use with Rapid fine wire No.13 Staples 6-14mm and No.8 Brads 15mm. Fine wire staples are barely visible and have minimal effect on textile fibres; ideal for demanding jobs such as securing textiles, canvas, leather, posters, netting, labels, beading or frames. The tacker has all-steel wear parts to ensure strength and durability. It is manually operated and has a noise damper and recoil free action. Other features include an adjustable impact force with a maximum setting for long staples or hard materials and a staple window to show the length of staples in use and when it is time to reload. Covered by a 2 year guarantee Fires:Fine wire staples - Type 13 6mm to 14mm.No8 Brads 15mm.
Rapid No.8 Brad Nails 18Ga are versatile and high-quality. These high-performance, galvanised brads are ideal for many different kinds of finishing applications such as moulding, beading or working with frames. Precision cut legs optimise material penetration.These Rapid No.8 Brad Nails have the following specification: Leg Length: 50mmGauge: 18Suitable For: PB131 & PBS151
The ForgeFix TechFast Masonry CSK Screw is a self-tapping, no stress alternative to plastic plugs. With an easy 2-step installation: drill a hole in substrate and screw in with power tool. These screws have a countersunk head with TORX® compatible recess. Protected by an Elementech coating, fire and corrosion resistant. Salt spray tested to 1,000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied with a T20 Impact Bit.Specification: Size: 6.3 x 32mmPack Quantity: Box of 100
STICK2® All-Purpose Contact Adhesive is a premium grade, rubber-based contact adhesive suitable for use with a wide variety of materials for both professional and DIY use. The product may be used internally and externally* for bonding decorative laminates, all types of wood, rigid PVC, ABS, leather, cork, linoleum, rubber, stone, metals and dense fabrics. All tins are fully printed. This product has excellent adhesion and will stick to most common surfaces.*Excluding 5L size which is for internal use onlyThis Everbuild STICK2® All-Purpose Contact Adhesive has exceptional bond strength and will out perform conventional wood glues in its class. EVBCONA5 is suitable for internal use only. 5 Litre
ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Size: M8 x 130mm.Pack quantity: 50.
Forgefix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M10 x 75mm.Pack quantity: 10.
These Forgefix General Purpose Pozi Screws with round heads are zinc plated finish for increased durability. They are versatile screws, suitable for use in and with many materials. APPLICATIONIdeal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Round headed screws have a flat under head surface making the screw ideal for laying flat on sheet material of all types, reducing deformation. These screws have twin threads to enable an easy start when driving.General Purpose Pozi Screw Round Head TT ZP 5/8 x 6 Box 200
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 6.0 x 60mm.Box quantity: 100.
These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, Torx compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, Torx compatible heads were designed to prevent it and to achieve a desired torque consistently. Torx compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 132mm Bag 10
These Forgefix extra large Clout Nails have a larger head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion.Suitable for roofing of all types. APPLICATION:Specifically used when roofing felt is being fitted to either shed or smilar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Clout Nail Extra Large Head Galvanised 25mm Bag Weight 2.5kg
ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M10 x 150mm.Pack quantity: 25.
These Forgefix Plasterboard Spring toggles have an all-metal constuction, making them ideal for applications where heat resistance is required. Their wide span wings spread load, ensuring an increased holding capacity. They have excellent holding in lathe and plaster applications.The toggles are quick and easy to use, with no requirement for specialist tools. APPLICATION:Light to medium-duty fixing for all manner of fixtures including bathroom accessories, shelving, lighting, radiators and much, much more.Plasterboard Spring Toggle M6 x 50 Bag 10
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 6.0 x 50mm Box 100
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 5.0 x 70mm Box 100
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 3 x 8 Box 100
