Forgefix TechFast Composite Panels to Steel Hex Screws are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 19mm EPDM rubber washers.These Forgefix TechFast Composite Panels to Steel Hex Screws have the following specification: Size: 5.5 x 150mmInsulation Thickness: 63-129mmPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:These nails are the most popular type of nail, used in many joinery and construction applications.Round Head Nail Bright Finish 50mm Bag of 250g
ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M10 x 75mm.Pack quantity: 50.
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.5 x 70mmThread: 42mm lengthPack Quantity: Box of 100
These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 42mm Box 1000
This Energizer® LED HIGHTECH Reflector Bulb has the following specification: Fitting: SES (E14)Input Wattage: 6W (40W equivalent)Lumens of Light: 430 lmSwitching Cycles: 40,000Average Rated Life: 25,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 50 x 63mmDimmable: NoRated: A+
This Energizer® LED Opal GLS Non-Dimmable Bulb has the following specification: Fitting: ES (E27)Input Wattage: 9.2W (60W equivalent)Lumens of Light: 806 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 60 x 110mmDimmable: NoRated: A+
This Energizer® LED GLS Dimmable Bulb has the following specification: Fitting: BC (B22)Input Wattage: 9.2W (60W equivalent)Lumens of Light: 806 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 60 x 110mmDimmable: YesRated: A+
This Energizer® LED Opal GLS Non-Dimmable Bulb has the following specification: Fitting: BC (B22)Input Wattage: 5.6W (40W equivalent)Lumens of Light: 470 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 60 x 109mmDimmable: NoRated: A+
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 2 x 12 Box 100
Tacwise galvanised narrow crown staples, ideal for a wide variety of 2nd fix tasks. Suitable for 191EL Pro Stapler/Nailer, Tacwise 35 Duo Nailer/Stapler and Tacwise 50 Duo Nailer/Stapler and other major brands in the market.Size: 22mm.Pack quantity: 1000.
The Rawplug Nylon Self-Drill Plasterboard Fixings require no drilling, simply pierce plaster and screw home. The nylon insulates against accidental electrical contact with a choice of panhead or countersink screws, flush fit finish. The Screw and fixture can be removed and re-used. (e.g. When decorating).Maximum Fixture Thickness: 12mmPack of 6.
These Forgefix Cavity Wall Plugs are made from Zinc alloy and have a specially designed cutting tip to pierce the plasterboard skin. Cavity Fixing Plugs are an easy to use fixing for plasterboard and hollow wall applications. They are supplied complete with a Pozi screw, and the countersunk head feature on the plug allows flush fitting of the screw to the plasterboard. The screw and fixture can be removed for cleaning and decoration. Alternative screws can be used if required for different fixtures. APPLICATION:Ideal when re-fixing into existing plug or anchor holes.Cavity Wall Zinc Speed Plug & Screw 4.5mm Bag 25.
These Forgefix flat Bellwire Clips have hardened masonry nails for increased efficiency, and which will fix into timber, blockwork and mortar. The nail should not be hammered directly in brick, and fixing into mortar is recommended. Application:For fitting bell wire cable to timber or masonry in audio, visual and both commercial and domestic cabling.Cable Clip Flat Grey 2.50mm Box 100
These Forgefix flat Bellwire Clips have hardened masonry nails for increased efficiency, and which will fix into timber, blockwork and mortar. The nail should not be hammered directly in brick, and fixing into mortar is recommended. Application:For fitting bell wire cable to timber or masonry in audio, visual and both commercial and domestic cabling.Cable Clip Flat Grey 1.50mm Box 100
Masterplug 822U is a 2-Gang Switched Socket with outboard rockers and two type A USB ports with a total output of 3.1A. Frees your sockets and allows you to charge all your devices. It comes with colour coded, angled in-line terminals and fits in a 25mm back box, ideal for retrofit. Manufactured to BS1363-2
Masterplug Metal Clad Switched Socket manufactured in heavy gauge steel and finished with a scratch resistant epoxy powder-coating. Flat profile with rounded edges, colour coded terminals with backed out captive screws for ease of installation. Two Earth terminals. Suitable for everyday use in a garage, shed, commercial and industrial environments.1 x Masterplug Metal Clad Switched Socket 1-Gang 13A
Masterplug Metal Clad Switched Socket manufactured in heavy gauge steel and finished with a scratch resistant epoxy powder-coating. Flat profile with rounded edges, colour coded terminals with backed out captive screws for ease of installation. Two Earth terminals. Suitable for everyday use in a garage, shed, commercial and industrial environments.1 x Masterplug Metal Clad Switched Socket 2-Gang 13A
