Bondloc B572 Pipe Seal Slow Cure 50Ml

Description

Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate.

Has a good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol and Brake Fluid. B572 is unusual in that it does not fully cure until some 60 hours after application, allowing for re-alignment of elbows and joints.

Replaces tapes and dopes, stops gas and fluid leaks on most metals and assists in lubricating during assembly. Will not shred or tear which would contaminate your system. Use it to seal against oils, gases, chemicals, water and steam etc.

Specifications:

Resin: Dimethacrylate.
Colour: White paste.
Cure speed with activator: Not recommended.
Cure speed Without Activator: up to 60 hours.
Viscosity Brookfield Sp3 @ 20rpm: 20,000cps.
Gap fill / Max threadform: 0.4 mm / M36.
Flash Point: >85°C.
Shelf Life: 36 months @ 20°C.
Specific Gravity: 1.25.
Max Operating Temperature: -55°C to + 150°C.

Cured Performance:

Full Cure Time: 60 hours.
Typical breakaway strength: 6 N.m.
Typical prevailing strength: 2 N.m.

Size: 50ml.

Bondloc B572 Pipe Seal Slow Cure 50Ml

Product form

£19.49 Incl. VAT

    Be quick! Only 5 products left in stock!

    • Shipped today? Order within: Nov 25, 2024 14:00:00 +0000
    • Free UK Shipping No Minimum Spend*
    • 5 Star Reviews Across All Our Retail Channels
    • Multiple Secure Payment Options
    • 100% Genuine Products
    Delivery

    Next Day Delivery available Monday - Friday when you order by 2pm.

    We take delivery very seriously. You can find the UK delivery time for any of our products on the relevant product page. These vary based on complexity of shipping, size/value of the item and the service used. These times are a guideline - however, in well over 99% of cases (and rising), we achieve or beat them.

    DELIVERY PRICES

    We offer free delivery throughout mainland UK and Northern Ireland. *This excludes certain items that are difficult to ship and some special offers. ‘Mainland UK’ is defined by the delivery area set by our couriers - although geographically belonging to the mainland we do have to charge a delivery fee to some parts of the Scottish Highlands and other outer lying areas given the increased costs charged by couriers for despatch to these areas. We do however attempt to keep these costs to our customers as low as possible.

    *Please note - this may vary for non-mainland UK addresses. You can always check the delivery cost of an order by adding items to your shopping cart and using the ‘Estimate Shipping & Tax’ tool.

    To find out more about delivery prices/methods please click here.

    Returns & Refunds

    We know that you will be pleased with your purchases from Trade Hut Direct however, there may be occasions when you will need to return items to us. If you wish to do so, please thoroughly read our returns policy and complete the returns form here.

    Important - if your return qualifies for a refund of the return carriage costs, please be aware that the maximum we can refund is £6. If the return costs are going to be more than this, please call our customer service team who should be able to arrange an alternative solution.

    To find out more about returns and refunds please click here.

    Payments

    We accept all major credit/debit cards.

    If you have any questions relating to placing an order, how to pay or issues with checking out please contact our customer service team on 0800 994 9992.

    SKU: BONB57250
    Barcode: 5005725050052

    Description

    Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate.

    Has a good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol and Brake Fluid. B572 is unusual in that it does not fully cure until some 60 hours after application, allowing for re-alignment of elbows and joints.

    Replaces tapes and dopes, stops gas and fluid leaks on most metals and assists in lubricating during assembly. Will not shred or tear which would contaminate your system. Use it to seal against oils, gases, chemicals, water and steam etc.

    Specifications:

    Resin: Dimethacrylate.
    Colour: White paste.
    Cure speed with activator: Not recommended.
    Cure speed Without Activator: up to 60 hours.
    Viscosity Brookfield Sp3 @ 20rpm: 20,000cps.
    Gap fill / Max threadform: 0.4 mm / M36.
    Flash Point: >85°C.
    Shelf Life: 36 months @ 20°C.
    Specific Gravity: 1.25.
    Max Operating Temperature: -55°C to + 150°C.

    Cured Performance:

    Full Cure Time: 60 hours.
    Typical breakaway strength: 6 N.m.
    Typical prevailing strength: 2 N.m.

    Size: 50ml.

    Recently viewed products

    Login

    Forgot your password?

    Don't have an account yet?
    Create account