Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (10in)Cut: round bastard.Tanged.
Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox 18 teeth per 10mmSize 200mm (8in)Tanged
Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox 14 teeth per 10mmSize 300mm (12in)Tanged
Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox 16 teeth per 10mmSize 250mm (10in)Tanged
Conical edges and surfaces which taper to a point. Flat uncut back, surfaces double cut, thin edge single cut. For fine filing and polishing jobs.Size: 16cm.Cut: 2 (smooth).Type: Knife needle file.
The Bahco HRFM-10 Filemaster with an ERGO™ handle suitable for use on ferrous and non-ferrous metals, plastics, laminates and hard woods. The half round HRFM10 variant tapers towards the point and has milled, curved teeth. The concave back is uncut. Size: 250mm (10in).
Set of 6 needle files in snapshut plastic wallet with hanging hole. 1 of each of the following :Hand, flat, half round, round, three square and square, with handle included. For fine filing and polishing jobs.Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Size: 16cm.Cut: 2 (smooth).Type: Needle set (6).
Bahco Handled Round File 1-230 is fitted with a ERGO™ handle. These files are perfect for filing circular openings or concave surfaces. Tapered towards the point, 8in files are semi-pointed and double cut. Second Cut: Approx. 36 teeth per 25mm (Medium).Bastard Cut: Approx. 26 teeth per 25mm (Coarse).Bahco Handled Round Second Cut File1-230-08-2-2 Size: 200mm (8in).Cut: Round Second Cut.
Bahco Handled Round File 1-230 is fitted with a ERGO™ handle. These files are perfect for filing circular openings or concave surfaces. Tapered towards the point, 8in files are semi-pointed and double cut. Second Cut: Approx. 36 teeth per 25mm (Medium).Bastard Cut: Approx. 26 teeth per 25mm (Coarse).Bahco Handled Round Bastard File 1-230-08-1-2 Size: 200mm (8in).Cut: Round Bastard File.
Bahco Handled Half Round Cut File with a ERGO™ handle is a tapered half round file with cross section which allows use on convex and concave surfaces, suitable for deburring work. The edges and surfaces are tapered towards the point. 8in file are semi-pointed. Double cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Bahco Handled Half Round Second Cut File 1-210-08-2-2 Size: 200mm (8in).Cut: Half Round Second Cut.
Bahco Handled Three-Square Second Cut File 1-170 with an ERGO™ handle. These three-square files are ideal for deburring and filing angles and internal corners. Also for filing of holes and large fillets as well as concave surfaces. Its tapered surfaces make it well suited for flat filing. It has an equilateral triangle, tapered shape towards the point, and double cut surfaces. The two component handle gives comfort and control during use. It also incorporates a handy hanging slot. Size: 200mm (8in).Cut: Second Cut.
Handled square files with double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. The bi-material handle gives comfort and control during use. It also incorporates a handy hanging slot.Slightly tapered towards tip for surface filing.Second Cut: Approx 36 teeth per 25mm (Medium).
Handled square files with double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. The bi-material handle gives comfort and control during use. It also incorporates a handy hanging slot.Slightly tapered towards tip for surface filing.Ideal for filing grooves, rectangular holes, internal corners and fine adjustment of cutting tools. 6 inch square handled second cut file.
Bahco Homeowners File Set with ERGO™ handles for comfort and grip, they are suitable for homeowners. Both files are 8in in length. Contains the following: 1 x Bastard rasp, 1 side - double second cut, for wood.1 x Bastard double cut, 1 side - single second cut, for metal.
Bahco Homeowner's Metal File 4-153 with an ERGO™ handle for comfort and grip, suitable for homeowners. One side has a single second cut for fine sharpening of edges on above implements and on knives and scissors, etc. and the other side has a bastard double cut for rough sharpening of edges on spades, hoes, mower blades, axes, etc. Size: 200mm (8in).
Bahco Homeowner's Wood File 4-152 with an ERGO™ handle for comfort and grip, suitable for homeowners. One side a double second cut for fine filing of metals, iron and plastics, etc and the other a bastard rasp for rough filing of wood, plywood, soft plastics, etc. Size: 8in.
For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing. Type 138 has one round edge, Type 140 has two round edges. Type 138 has one round edge.Type 140 has two round edges.Millsaw bastard cutSize 200mm (8in)Tanged
For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing. Type 138 has one round edge, Type 140 has two round edges. Type 138 has one round edge.Type 140 has two round edges.Millsaw bastard cutSize 250mm (10in)Tanged
For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing. Type 138 has one round edge, Type 140 has two round edges. Type 138 has one round edge.Type 140 has two round edges.Millsaw bastard cutSize 200mm (8in)Tanged
For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing. Type 138 has one round edge, Type 140 has two round edges. Type 138 has one round edge.Type 140 has two round edges.Millsaw bastard cutSize 250mm (10in)Tanged
Bahco 1-106 series Hand files with Oberg cut are useful for all flat filing. The Oberg cut gives a high removal rate and smooth surface finish on most materials. The edges and surfaces are parallel. Surfaces single cut, bastard, with chipbreaking teeth. One edge single cut.Size 200mm (8in).
Bahco 1-106 series Hand files with Oberg cut are useful for all flat filing. The Oberg cut gives a high removal rate and smooth surface finish on most materials. The edges and surfaces are parallel. Surfaces single cut, bastard, with chipbreaking teeth. One edge single cut.Size 250mm (10in).
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (6in)Cut: hand second.With ergo- grip handle.
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut: hand bastard.With ergo grip handle.
The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO™ handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size: 200mm (8in)Cut: hand secondWith ergo-grip handle.
Black and Decker KA900E Powerfile™ Belt Sander with a 13mm sanding belt, that is ideal for sanding, shaping, filing, sharpening and rust removal applications. Variable speed for optimal control and finish when sanding wood, metal, ceramic tiles, masonry, plaster and plastic. Cyclonic action dust canister, for efficient dust collection and a cleaner work area. Has a powerful 350W motor enables optimal stock removal to get the job done quicker. The narrow arm allows for work in confined spaces, and has a screw operated belt tracking makes the sander easy to operate and prevents the belt from coming off the rollers during operation. Applications: sanding curved surfaces, shaping wood, removing excess weld, filing down nails and screw heads, cleaning out apertures e.g. door locks, shaping ceramic tiles, removing rust, sharpening blades. Specification Input Power: 350WBelt Speed: 900-1,400/min. Belt Dimensions: 451 x 13mmCable Length: 3m
Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.Size 100mm (4in)Cut half round second Flatside: Double CutHalf-Round: Single CutTanged
Cross section allows use on convex and concave surfaces. Tapered very slightly towards point both in width and thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size. 100mm (4in)Cut half round bastard Flat Side: Double CutHalf-Round: Double Cut.Tanged
The Faithfull Hand Rasp Round File is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. This cylindrical rasp features an ABS plastic handle plus a thumb grip at the tip for extra control and is ideal for hole enlargement or contour shaving. Specification: Blade Size: 255 x 17mmOverall Length: 400mm
The Faithfull Hand Rasp File is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body design allows this rasp to be used with a single or dual handed operation for fast stock removal. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 140 x 40mmOverall Length: 310mm
Faithfull Replacement Round File Blade for use with FAIHRROUND Round Hand Rasp and similar products from other leading brands. Suitable for use on all types of wood, aluminium, plastics, fibreglass and laminates. Can also be used for plaster and filler removal. Specification: Blade Size: 255 x 17mm
This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.Cut half round second Blade Length: 200mm (8in)Blade Width: 20mm (3/4in)
This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.The FAIFIHRSC6 Engineers File has the following specifications: Cut: Half-Round Second. Blade Length: 150mm (6 in). Blade Width: 16mm (5/8 in).
This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.The FAIFIHRSC10 half round engineers file has the following specifications:Blade Length: 250mm (10in). Blade Width: 24mm (7/8in).
Faithfull Chainsaw Files are ideal for sharpening round hooked chainsaw teeth. They are perfect for professional and frequent DIY use and fitted with a comfortable handle. Supplied in a blister pack.FAIFIC732 Chainsaw File has the following specifications:Cut: Single Cut. Blade Length: 200mm (8in). Blade Width: 5.5mm (7/32in).
