Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm(10in)Cut: hand bastardTanged
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 200mm (8in)Cut: flat smooth.Tanged.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 150mm (6in)Cut: flat smooth.Tanged.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 300mm (12in)Cut: flat smooth.Tanged.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 250mm (10in)Cut: flat smoothTanged
Bahco FM10 Filemaster with an ERGO™ handle suitable for use on ferrous and non-ferrous metals, plastics, laminates and hard woods. The parallel file FM10 has milled teeth (one side shear cut the other curved teeth). Size: 250mm (10in)
A Bahco Handle for Shaped Files that features a two component ERGO™ design. The end covers the tang and shoulder of the file for safety and comfort. Suits Series 1-190 150-170mm (6-7in) & Series 1-170 200-250mm (8-10in).
A Bahco Handle for Flat and Half-Round Files that features a two component ERGO™ design. The end covers the tang and shoulder of the file for safety and comfort.
Bahco Handled Half Round Cut File with a ERGO™ handle is a tapered half round file with cross section which allows use on convex and concave surfaces, suitable for deburring work. The edges and surfaces are tapered towards the point. 8in file are semi-pointed. Double cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Bahco Handled Half Round Bastard Cut File 1-210-08-1-2 Size: 200mm (8in).Cut: Half Round Bastard.
The Bahco Handled Flat Second Cut File is for the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.1 x Bahco Handled Flat Second 1-110-08-2-2 Cut File 200mm (8in)
Bahco Handled Flat File 1-110 with soft-grip ERGO™ handle does the same job as hand files but are sometimes preferred because the tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).
Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held or table work.This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm(C) Cutting Length: 9.5mmShank: 1/4in
Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety ‘K’ mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held or table work.This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm(C) Cutting Length: 25.4mmShank: 1/4in
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90 D = 12.7 mmC = 25.4 mm
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90 D = 12.7 mmC = 9.5 mm
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Angle A = 90 D = 12.7 mmC = 50 mm
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2 in Shank. Angle A = 90° D = 19.1 mmC = 50 mm
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90 D = 6.3 mmC = 25.4 mm
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank. Angle A = 90° D = 6.3 mmC = 12.7 mm
Three piece handled file set for metalwork applications. These files will give a good professional finish to any work piece.The blade is high carbon steel for strength and durability and the bi-material handle has a hang hole for convenient storage. 1 of each 8in flat, half-round and three-square.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. FF34.Size. 100 x 10mm (4 x 3/8 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. FF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. FF214.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. FF144.Size. 100 x 12mm (4 x 1/2 in).Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Square.Type. FF14.Size. 100 x 6mm (4 X 1/4 in)Grade. Fine.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.TriangularType. FF114.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.
These Faithfull Drill Saw Rasps can be used to drill pilot holes in material and then can be used as a saw to cut shapes. They can also be used to enlarge existing holes. This set consists of:1 x metal drill saw rasp 6.5 x 90 mm. 1 x wood drill saw rasp 6.5 x 90 mm.
Faithfull stabilisers for use with external building profiles. Help to ensure quick and accurate bricklaying. Building profiles are easy to set up and simple to use. Pack of 2.
Faithfull setting device for use with external building profiles. Help to ensure quick and accurate bricklaying. Building profiles are easy to set up and simple to use.
The Faithfull FAIPROEXTB9 pair of spare bolts are used as part of an external building profile. They are made from galvanised steel and are 230mm (9in) in size.
The Faithfull FAIPROEXTB18 pair of spare bolts are used as part of an external building profile. They are made from galvanised steel and 460mm (18in) in size.
