External corner profiles provide the answer to fast and accurate bricklaying by removing the need to raise corners first. Brick profiles may be used after three courses of bricks have been laid and allowed to set overnight. Once the profiles have been attached to the brickwork and set up, they provide an accurate and firm corner post from which a building line may be run. Building profiles are easy to set up, simple to use and are supplied complete with all the fitments needed to help you lay bricks quickly and accurately. The profile's design also allows easy access to the brickwork for pointing and rubbing in to be completed as work progresses for greater productivity. The galvanised steel construction is simple to set up and remove and can be adjusted using wing nuts. The Faithfull FAIPROEXT profile pack comes complete with all fittings and full instructions including:2 x External steel profiles2 x 225mm (9in) retaining bolts2 x 350mm (14in) retaining bolts2 x 450mm (18in) retaining bolts4 x Clamping brackets2 x Line holders1 x Setting device2 x Stabilisers4 x Wing nuts
Diamond needle files are used in applications where the surface finish takes priority over fast stock removal rates and are most suited for smaller workpieces.They are often used by engineers and model makers where precision is required.Each set contains six files fitted with comfortable soft-grip handles, the files have a working length of 50mm, blade length of 100mm and an overall length of 150mm. Diamond files are suitable for use on metal and plastic. Six different file profiles as follows: Half round, round, flat taper, square, flat, three square.
These Faithful files and rasp are fitted with a soft grip, non-slip handles with integral hanging holes for storage. The set contains 5 files and 1 rasp in a handy roll up storage wallet. Comprising: 250mm (10 in) Engineer's hand bastard cut file.200mm (8 in) Engineer's hand second cut file.Designed for deburring and the filing of sharp corners, internal shoulders and is ideal for use on flat surfaces. 200mm (8 in) Half-round second cut file.Designed for deburring and filing of large holes and flat surfaces. 250mm (10 in) Round second cut file.Designed for the filing of concave surfaces. 150mm (6 in) Three-square second cut file.Designed for the filing of internal angles and flat surfaces. 250mm (10 in) Half-round cabinet rasp.Specifically designed for use with wood, plywood, wallboard, hard plastics and many soft materials.
Used correctly, this diamond chainsaw file will last a long time and increase the life of a chainsaw blade. Often only one or two light strokes are sufficient to put a sharp edge back on the blade. Blue Coarse Grit.Size 5.5mm
Used correctly, this diamond chainsaw file will last a long time and increase the life of a chainsaw blade. Often only one or two light strokes are sufficient to put a sharp edge back on the blade. Blue Coarse Grit.Size 4.8mm
Used correctly, this diamond chainsaw file will last a long time and increase the life of a chainsaw blade. Often only one or two light strokes are sufficient to put a sharp edge back on the blade. Blue Coarse Grit.Size 4.0mm
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 200mm (8in)Cut: flat second.Tanged.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 150mm (6in)Cut: flat second.Tanged.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 250mm (10in)Cut: flat second.Tanged.
Surfaces parallel, edges taper to a point. Surfaces double cut, edges single cut. For fine filing and polishing jobs. 16cm, smooth cut, flat needle file.
Bahco Flat files do the same jobs as hand files but are sometimes preferred because the tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 350mm (14in)Cut: flat bastard.Tanged.
Bahco Flat files do the same jobs as hand files but are sometimes preferred because the tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: flat bastard.Tanged.
Bahco Flat files do the same jobs as hand files but are sometimes preferred because the tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (10in)Cut: flat bastard.Tanged.
Smooth single cut teeth for sharpening round hooded chainsaw teeth. Safe point and special tooth construction for rapid cutting.Length 200mm (8in).Diameter: 7/32in.
Smooth single cut teeth for sharpening round hooded chainsaw teeth. Safe point and special tooth construction for rapid cutting.Length 200mm (8in).Diameter: 3/16in.
Bahco File Set 5 Piece, Engineer's 10in file set, all are fitted with ERGO™ handles for comfort. Comes with:1 x 1-210-10-1-2 half-round bastard file.1 x 1-230-10-1-2 round bastard file.1 x 1-100-10-1-2 hand bastard file.1 x 1-100-10-2-2 hand second cut file. 1 x 1-160-10-1-2 square bastard file. Supplied in a plastic roll wrap.
This Bahco ERGO™ File Set is perfect for fine filing and polishing jobs. The handle has been developed according to the scientific ERGO™ process. Supplied in a snap-shut plastic wallet with hanging hole. Contains one of each handled file: hand, warding, square, three-square, half-round and round. Specification Type of Cut: 3 SmoothBlade Length: 100mm
Bahco Double Ended Saw File for general purpose saw sharpening with both ends having second cut teeth. Single cut teeth on all sides. Fitted with an ERGO™ type handle.Size 180mm (7in).Side: 1/4in.
Bahco Double Ended Saw File for general purpose saw sharpening with both ends having second cut teeth. Single cut teeth on all sides. Fitted with an ERGO™ type handle.Size 150mm (6in).Side: 1/4in.
Triangular, with edges tapering towards the point.Surfaces and edges single cut.For sharpening all types of saw with fine cross toothing.Second cut.Width figures indicate the largest width of the file section. Size: 5in.Type: extra slim taper saw file.
