Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length: 63mm (2.1/2in).Overall length: 152mm (6in).Size. 5.5mm (7/32 in).
Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length: 63mm (2.1/2in).Overall length: 152mm (6in).Size. 3.2mm (1/8 in).
A hexagonal bodied Rivet Snap with the working end heat-treated to ensure a long life.This tool is used for the forming of heads on solid rivets.Size 5 x 125mm (3/16 x 5 in)
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 12.0mm x 1.75 taper
The Faithfull Magnetic Square Welding Clamp enables fast and accurate holding of ferrous metals for welding and assembly. The clamp contains a strong magnet and features angled edges for precise alignment of metal workpieces. It will securely hold round and square tubing, angle and flat stock. Through-holes enable multiple clamps to be fixed together when working on larger projects. Ideal for use by welders and fabricators. Achievable Angles: 45°, 90° & 135°Pull Power: 20kgSize: 100 x 95 x 19mm
A 6-piece pin punch set made from quality chrome vanadium steel gives increased strength and durability, for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Contains the following sizes: 1.5, 3, 4, 5, 6, and 8mm (1/16, 1/8, 5/32, 3/16, 1/4, 5/16in).
The Faithfull Shallow Pot Magnets are designed for clamping directly onto a steel surface. The large, powerful ceramic magnet is encased within a protective steel shell. Magnetic on one face only, creating a solid clamping force for holding and lifting metal parts. The shallow depth allows use in confined spaces. They can be secured with bolts through their centre holes and their heavy lifting capacities make them a great choice for use in industrial settings.Diameter: 50.8mmHeight: 8.0mmPull power: 10.0kg
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 6mm (1/4 in).
The BlueSpot Screw Extraction Bits are manufactured from carbon steel and feature a reverse thread. They are used to remove broken/damaged screws and bolts. Simply insert into pre-drilled hole within screw and operate drill in reverse to remove screw without damage to hole. The square end also allows use with a tap wrench. Suitable for screws 3-25mm diameter.
Double ended screw removers for use with a reversible drill to remove damaged screws, machine screws and broken bolts from wood, metal and plastic.Set of 2 bits can be used on Pozi, Phillips, Slotted, Hexagon, Torx, Tri-wing, Frearson and most Tamper Resistant Screws.
A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be ordered separately. To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.Size.1 3/16in.Key Type.B. 5/16 in hexagonal wrench
A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be ordered separately. To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.Size. 1 1/4 in.Key Type.B. 5/16 in hexagonal wrench
A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be ordered separately. To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.Size. 1 1/2 in.Key Type.B. 5/16 in hexagonal wrench
BlueSpot Tools Metric Tap and Die Set, manufactured from alloy steel and features a range of taps and dies for cutting and cleaning threads. Supplied in a heavy-duty steel box for easy storage. Contains: 21 x Taps (3 of each size): M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 and M12 x 1.757 x Dies: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 and M12 x 1.751 x Tap Wrench1 x Die Holder1 x Metric Pitch Gauge1 x Screwdriver
The Faithfull Double Ended Scriber is a useful pocket sized scriber with a hardened steel reversible point. Scribes and scores most metal surfaces. Compact size makes it useful for working in confined spaces. Includes pocket storage clip. Length: 110mm (4.1/3in).
Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, Installation tool, precision stainless steel inserts and instructions.Supplied in a sturdy container.Supplied with a tapping drill.Kit 1/4 Whit x 20 tpiLength 1 1/2 x Diameter
A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be ordered separately. To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.Size 7/8 in.Key Type. 7/32 in hexagonal wrench
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 6.0 x 1.0 set of 3
The Faithfull pin chuck is a useful accessory for holding drills too small to be held by standard capacity drill chucks. Supplied with three collets of the following sizes: 1 x 0 - 0.75mm (0 - 1/32in). 1 x 0.75 - 1.5mm (1/32 - 1/16in). 1 x 1.5 - 2.5mm (1/16 - 3/32in).
The Faithfull three piece set of hand tap wrenches designed for use in hand tapping and reaming operations. Each wrench features a heavy-duty ductile steel body with a knurled chuck cap. A four point clamping system helps to increase the range of tap sizes that can be used and provide a firm non slip grip for accurate control.Three sizes cover the following metric and imperial size taps:M1-M4 1/16in - 5/32inM4-M6 5/32in - 1/4inM6-M12 1/4in - 1/2in
The BlueSpot Tools Tap Set can be used to cut threads into a wide range of materials. Manufactured from carbon steel for increased strength and durability. The set includes a T-shape tap holder for easy use. Sizes: M12 x 1.75, M10 x 1.5, M8 x 1.25, M7 x 1, M6 x 1
The Faithfull Prestige Mitre Saw Protractor is a modern and accurate way to measure internal and external wall angles. This measurement is commonly used to transfer angles to mitre saws but could also be used as a datum point for hand cutting. Manufactured using CNC machining from heavy-duty aluminium. It is then black anodised for protection and laser etched for accuracy.
The Faithfull Prestige Centre Finder Gauge is manufactured from aluminium using computer numerical controlled (CNC) machines. The black anodised finish offers enhanced corrosion protection and the laser engraved scales give outstanding measurement accuracy. The centre finder is used to find the centre point of a square or cylindrical object. It features ruled markings in millimetre increments and can also be used for 45° and 90° mitre cut lines, making this product ideal for any engineer's workshop.With a measuring capacity of 140mm, this tool can be used on objects with a diameter or width of up to 240mm. Specification: Length: 150mmMeasuring Capacity: 140mm
Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Size: 3Capacity: 1.5 - 3mm (1/16 - 1/8 in)
The Faithfull useful set of picks and hooks manufactured from stainless steel. The set contains 3 single end picks and 3 double end hooks. Suitable for pin or clip picking and the removal of seals and O-rings and many other applications. Approximate lengths 140mm - 165mm. Supplied in a plastic pouch.
Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 6mm (1/4 in).
Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 4mm (5/32 in).
Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 10mm (3/8 in).
The Faithfull Engineer's Set has been carefully crafted from high-quality tool steel, these squares are accurate to BS939 Grade B standard. The stock and blade are precision ground to ensure straightness and accuracy, and the spring steel blade is hardened and tempered for increased durability. Set of 4 in a wooden storage case containing 50mm, 75mm, 100mm and 150mm (2in, 3in, 4in, 6in).
The Faithfull Engineers Square has been carefully crafted from high quality tool steel, these squares are accurate to BS939 Grade B standard. The stock and blade are precision ground to ensure straightness and accuracy, and the spring steel blade is hardened and tempered for increased durability. Size: 150mm (6in) External size: 173 x 100mmInternal size: 150 x 75mmStock thickness: 11mmBlade thickness: 1.7mm
This compact set of engineering tools contains 6 essential marking and measuring tools. Supplied in a wooden storage case, the set contains the following tools: Faithfull FAIESMEASURE Engineers Marking & Measuring Set 6 Piece comprises:3 x Precision Stainless Steel Squares 50mm (2in), 100mm (4in), 150mm (6in), accurate to BS939 Grade B standard.1 x Steel Centre Finder 38mm capacity.1 x Stainless Steel Rule 150mm (6in).1 x Scriber 135mm (5¼in).
The Trend EASYSCRIBE is a handheld scribing tool for architrave, skirting, scribing doors, scribing worktops, setting hinge recess depth, etc. Fitted with an articulated arm that allows the required offset to be set precisely, from 1mm to 40mm, for increased flexibility. It has a thin guide plate (0.5mm) for access into narrow gaps ensuring full versatility. The flat base ensures constant contact for a consistent scribe. Fitted with a knurled foregrip sliding steel guide plate for up to 50mm projection and a thumb wheel for fine adjustment. It marks a narrow pencil line, 0.7mm wide. Use for a multitude of applications including hanging doors, installing worktops, plinths & skirting, architraves, flooring, window boards, panelling, shop fitting and tiling. Can be used as a marking gauge.1 x Trend EASYSCRIBE Scribing Tool with 3 x Graphite Leads.
A comfortable DynaGrip sleeve surrounds a fully hardened body, which is precision milled for extra long life. The overall length is 25% longer than conventional nail punches, making it easy to set nails in hidden and hard to reach areas. Colour coded sleeves for easier identification of sizes.This set of 3 punches contains the following tip sizes:1/32in (0.8mm) Yellow Sleeve 1/16in (1.6mm) Grey Sleeve3/32in (2.4mm) Red SleeveOverall Length: 125 mm / 5in
The Faithfull Double Ended Scriber is a dual use scriber has a knife edge at one end and is pointed at the opposite end. The knife edge is ideal for scoring wood, plastics and laminates. It is also called a striking knife. Length: 165mm (6.1/2in).
