The Moore & Wright 110-DBL Series Digital Calipers display values in mm/inch and feature ABS / INC measurement settings. All the metal parts are made from hardened stainless steel. The calipers offer a zero point at any position and a conveniently located on/off button. The calipers are manufactured to DIN 862 standards. Supplied with a CR2032 battery.The MAW11030DBL calipers have the following specifications: Range: 0-300mm (0-12in).Resolution: 0.01mm (0.005in).Jaws: 60mm.
The Faithfull Digital Calipers are made from hardened stainless steel, this electronic digital caliper provides precision readings through a clear liquid crystal display. Its many features include a fine adjustment roller which allows precise measurements to be taken quickly and easily. The digital section button enables readings to be displayed in either metric or imperial format. The four-way measurement function provides a choice of readings in external, internal, depth and step modes. The strong plastic storage case enables the caliper to be kept in a dust and damp free environment. Specifications: Measuring range: 0-150mm / 0-6inResolution: 0.01mm / 0.0005inAccuracy: ±0.03mm / 0.001inRepeatability: 0.01mm / 0.0005inMax measuring speed: 1.5m/sec, 60in/secMeasuring system: Linear capacitive measuring systemDisplay: LCD displayCharacter Height: 6.35mmWorking temperature: 5-40°C, 41-104°FData output: Serial output for interface with computer or printerBattery: 1.55V, LR44Auto power off: 5 minutes
The Faithfull Die Holders are used for securely holding round dies for the clean cutting of external threads. The body and ends are black powder-coated, with each end knurled for a comfortable non-slip grip.Size: 50.8mm (2 in)
The Faithfull Depth Gauge is a versatile tool that allows the angle and depth to be measured simultaneously. The protractor features deep etched graduations 0 - 180° in opposite directions permitting the reading of both the direct and supplementary angles. The rule is graduated in both imperial and metric dimensions up to 150mm (6in) and a knurled thumb nut allows the rule to be locked at the chosen angle. Blade Length: 150mm (6in).Graduations: 0.5mm or 64ths.
Faithfull Deep Pot Magnets have a steel outer shell with a highly magnetic front face and an M6 threaded hole in the back. They are made from alnico to provide high-resistance to corrosion and operate at temperatures up to 220°C. The magnets offer high-holding forces on parts with a clean surface and are suitable for many applications. They are ideal for incorporating into jigs and fixtures.Diameter: 27.0mmHeight: 25.4mmPull Power: 5.0kgHole Thread: M6
The Faithfull Centre Squares (Finders) is made from ground tool steel and has a hardened and tempered blade. The device has a useful square for rapid location of round bar or disc centre. To execute, place the round bar between the centre square. Scribe different lines on the workpiece each time changing its position. The centre of the scribed lines will provide the accurate centre of the workpiece. The Centre Squares (Finders) is supplied in a box.Bar Capacity: 75mm.
Faithfull Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.Point Diameter: 3mm (1/8in).Length: 100mm (4in).
The Faithfull Fixed joint Jenny Calipers are specifically designed to locate the centre of a round or square section of steel. The leg that holds the adjustable point is offset with the locating lug incorporated in the straight leg. Also known as Hermaphrodite calipers. Range: 150mm (6in).
The Faithfull Internal Spring Calipers, have polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 75mm (3 in)
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa.They reduce thread wear and are interchangeable with other brands of inserts or tooling.Size. 6mm x 1.0 Length. 1 1/2 x Diameter.
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 2mm (5/64 in).
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container.Supplied with a tapping drill.Kit 10mm x 1.5Length 1 1/2 X Diameter
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container.Please note NOT supplied with a tapping drill.Kit 12.0mm x 1.75Length 1 1/2 x Diameter
Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 16mm (5/8 in)
The Faithfull Vernier Calipers are manufactured from hardened stainless steel with dual reading in Imperial to 0.001in and in Metric to 0.02mm. The universal four-way measurement facility enables reading in external, internal, depth and step modes. The sliding thumblock feature easily allows quick and precise measurements to be taken. The satin finished scales and beam ensure fast, easy and accurate readings. Range: 150mm (6in).Graduations: 0.02mm and 0.001in increments.
The Faithfull Shallow Pot Magnets are designed for clamping directly onto a steel surface. The large, powerful ceramic magnet is encased within a protective steel shell. Magnetic on one face only, creating a solid clamping force for holding and lifting metal parts. The shallow depth allows use in confined spaces. They can be secured with bolts through their centre holes and their heavy lifting capacities make them a great choice for use in industrial settings.Diameter: 44.5mmHeight: 6.35mmPull Power: 9.0kg
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 10mm (3/8 in).
The Faithfull Adjustable Magnetic Welding Clamp, also known as an 'adjustable links magnet', is a type of welding clamp where each magnet can be completely rotated. The 2 magnets can be adjusted to hold ferrous metal workpieces at any angle by tightening/loosening the wing nuts. The compact size allows it to be used in confined spaces. Ideal for use by welders and fabricators. Magnetic Block Size: 50 x 25mmOverall Size: 114 x 25 x 50mm
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 4mm (5/32 in).
The Faithfull D.I.Y Vernier Calipers which are manufactured from mild steel with dual reading in imperial and metric. The universal three-way measurement facility enables readings in external, internal and depth modes.The sliding thumb-lock feature easily allows quick and precise measurements to be taken. Metric and Imperial dual reading with a handy locking function. Range: 125mm (5in).Graduations: 1.0mm and 0.16in increments.
Micrometer Engineers Marking Blue gives a clear, perfect mark on any metal, in any light and being a lubricant cannot damage bearings or other working parts.
Square Leg Compasses, when fitted with a standard pencil or other marking implement, can be used for drawing circles and arcs or used as dividers to measure distances or repeat a set distance. Manufactured from forged steel with square section legs for grip and balance, this Faithfull divider has a hardened and ground compass point and knurled grip locking screws. Size: 200mm (8in).
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 5mm (3/16in)Length: 100mm (4in)
A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be ordered separately. To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.Size. 11/16 in.Key Type. 7/32 in hexagonal wrench
These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.The set of eight punches include one of each of the following.1.5mm , 2.5mm , 3.0mm , 4.0mm , 5.0 mm , 5.5mm , 6.0mm and 8mm Length: 100mm (4 in)
This Faithfull handy pocket-sized caliper is manufactured from a lightweight non-marring carbon fibre material. The digital selection button enables readings to be displayed in either metric or imperial format and will provide precision readings from 0.01mm and 0.0005in. The calipers have an easy-to-read clear liquid crystal display and can perform internal, external and step measurement functions. A convenient pocket clip is provided to help keep the calipers close at hand and safe. Specifications: Measuring range: 0-75mm (0-3in).Resolution: 0.01mm (0.0005in).Accuracy: ± 0.02mm (0.001in).Auto off: 5 minutes.Display: LCD, character height 8mm.
Manufactured from high quality C45 carbon steel, this Faithfull tap and die set is suitable for cleaning and cutting threads in mild steel, aluminium and brass. Each set contains a tap wrench, die holder, screwdriver and a range of metric taps and dies, featuring the most commonly used European threads. The Faithfull FAITAPDSET39 39 piece metric tap & die set contains the following: 1 x Tap wrench: M3-121 x Die stock holder: 25mm (1 inch)1 x Screwdriver1 x Screwpitch1 x Tap wrench16 x Metric Taps: 3x0.5mm, 3x0.6mm, 4x0.7mm, 4x0.75mm, 5x0.8mm, 5x0.9mm, 6x0.75mm, 6x1.0mm, 7x0.75mm, 7x1.0mm, 8x1.0mm, 8x1.25mm, 10x1.25mm, 10x1.5mm, 12x1.5mm, 12x1.75mm1 x Tap: 1/8 inch NPT16 x Metric Dies (same sizes as metric taps)1 x Die: 1/8 inch NPT.
Manufactured from high quality C45 carbon steel, this Faithfull tap and die set is suitable for cleaning and cutting threads in mild steel, aluminium and brass. Each set contains a tap wrench, die holder, screwdriver and a range of metric taps and dies, featuring the most commonly used European threads. The Faithfull FAITAPDSET21 21 piece metric tap & die set contains the following: 1 x Tap wrench: M3-121 x Die stock holder: 25mm (1 inch)1 x Screwdriver8 x Metric Taps: 3 x 0.5mm, 4 x 0.7mm, 5 x 0.8mm, 6 x 1.0mm, 7 x 1.0mm, 8 x 1.25mm, 10 x 1.5mm and 12 x 1.75mm.1 x Tap: 1/8 inch NPT8 x Metric Dies (same sizes as metric taps)1 x Die: 1/8 inch NPT.
The Faithfull HSS Straight Flute Split Dies are versatile, general-purpose dies for threading rods. They are suitable for most materials and can be used for hand or machine cutting. Each die threads a male thread to its equal and opposite female thread. All dies should be used with the corresponding rod size to ensure both cutting ease and thread efficiency. These dies are made from high-speed steel with a bright finish and conform to ISO529.Size: M8Thread: 1.25
The Faithfull HSS Straight Flute Split Dies are versatile, general-purpose dies for threading rods. They are suitable for most materials and can be used for hand or machine cutting. Each die threads a male thread to its equal and opposite female thread. All dies should be used with the corresponding rod size to ensure both cutting ease and thread efficiency. These dies are made from high-speed steel with a bright finish and conform to ISO529.Size: M6Thread: 1.0
The Faithfull HSS Straight Flute Split Dies are versatile, general-purpose dies for threading rods. They are suitable for most materials and can be used for hand or machine cutting. Each die threads a male thread to its equal and opposite female thread. All dies should be used with the corresponding rod size to ensure both cutting ease and thread efficiency. These dies are made from high-speed steel with a bright finish and conform to ISO529.Size: M5Thread: 0.8
The Faithfull HSS Straight Flute Split Dies are versatile, general-purpose dies for threading rods. They are suitable for most materials and can be used for hand or machine cutting. Each die threads a male thread to its equal and opposite female thread. All dies should be used with the corresponding rod size to ensure both cutting ease and thread efficiency. These dies are made from high-speed steel with a bright finish and conform to ISO529.Size: M4Thread: 0.7
The Faithfull HSS Straight Flute Split Dies are versatile, general-purpose dies for threading rods. They are suitable for most materials and can be used for hand or machine cutting. Each die threads a male thread to its equal and opposite female thread. All dies should be used with the corresponding rod size to ensure both cutting ease and thread efficiency. These dies are made from high-speed steel with a bright finish and conform to ISO529.Size: M3Thread: 0.5
The Faithfull HSS Straight Flute Split Dies are versatile, general-purpose dies for threading rods. They are suitable for most materials and can be used for hand or machine cutting. Each die threads a male thread to its equal and opposite female thread. All dies should be used with the corresponding rod size to ensure both cutting ease and thread efficiency. These dies are made from high-speed steel with a bright finish and conform to ISO529.Size: M10Thread: 1.5
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 5mm (3/16 in).
