Irwin 9.5mm Shank Arbor/Mandrel with removable pilot drill for easy replacement. Available in multiple chuck sizes for toughness and long life and with a tough, durable construction.Irwin Mandrel 13 mm (14-30 mm). Sizes : 14-30mm (9/16-1 3/16 in). Shank 13mm (1/2 in) Hex.
The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 160mm Diameter: 7mm Flute Length: 109mm
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Size: 19 mm dia
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 7.0mmWorking length: 69mm.Overall length: 109mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 4.80mmWorking length: 52mm.Overall length: 86mm.
Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
The Dormer A108 Metric Split Point HSS Jobber Drill Bits are designed specifically for machining stainless steels. The quick spiral helix enables rapid swarf removal. Manufactured to DIN 338 RW / BS328 / ISO 235. Specification Flute Geometry: Quick Helix, Right hand spiral.Point Angle: 135°: up to 1.5mm: 135° Split Point, 1.6mm, 1/16 and above.Surface Treatment: Blue.Material: High Speed Steel.Tip diameter: 10.0mm.Working length: 87mm.Overall length: 133mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 8.20mm.Working length: 75mm.Overall length: 117mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 13.50mm.Working length: 108mm.Overall length: 160mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 0.45mm.Working length: 5mm.Overall length: 20mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 9.50mm.Working length: 81mm.Overall length: 125mm.
The Halls High Speed Steel Countersink with 1/4in hexagon shank, 3 flute 90° included angle. Designed for use with power tools and for use on metal.Size. 20.5mm.Angle. 90° .
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502787 Auger drill bit has the following dimensions:Drillbit diameter: 38.0mmTotal length: 240mmWorking Length: 175mm
The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.This DEWALT Extreme Flatwood Drill Bit has the following specification: Diameter: 28mm.Length: 152mm.
The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.This DEWALT Extreme Flatwood Drill Bit has the following specification: Diameter: 10mm.Length: 152mm.
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502744 Auger drill bit has the following dimensions:Drillbit diameter: 10.0mmTotal length: 191mmWorking Length: 114mm
The DEWALT Self-Feed Drill Bits are ideal for drilling of clean holes in wood, MDF, hardboard and chipboard. They have two sharp cutting edges and an aggressive 'self feed' spur for rapid penetration into material. They are fitted with a non-slip shank for better in chuck bit retention. For use with corded and cordless drills.These DEWALT Self-Feed Drill Bits have the following specification: Diameter: ;68mm.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 13/32in.Working length: 87mm.Overall length: 133mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 3.30mm.Working length: 36mm.Overall length: 65mm.
The DEWALT SDS Max Drill Bit has a 4 cutter X-head design for improved user comfort, reduced vibration and improved hole quality. The 4-flute spiral maximises flute entry which increases drilling speed and debris removal with a heavy-duty shank for maximum durability.1 x DEWALT SDS Max Drill Bit 12 x 340mm
Dormer A191 HSS Metric Jobber Drills in plastic case with each size embossed for ease of identification.Contains: 19 drill bits. Range of sizes from 1mm to 10mm by 0.5mm.
The Dormer A120 Metric HSS Stub Drill Bits for general machining applications and is ideal for use in portable drills, turrets and automatic lathes. Special split-point ensures easy starting and accurate drill location.
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists
The DEWALT HSS G Jobber Drill Bit is a precision ground twist drill bit for rapid drilling, long life and excellent concentricity. It has been manufactured from High Speed Steel that conforms to DIN 338. The drill bit is ground from solid stock and has a right hand cutting, type N flute with a precision ground end at 118° point angle.The DEWALT 13 Piece Jobber Drill Bit Set contains the following sizes: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 4.8, 5.0, 5.5, 6.0 & 6.5mm
