Faithfull Dry Diamond Core Bits combine a professional quality 1/2in BSP threaded core with premium 8mm fluted turbo cut diamond segments. They are manufactured to offer exceptional wear and speed of cut. The V-groove segments assist in clearing debris when in use. Ideal for use in plumbing, electrical and general building installations to cut clean holes in brick and concrete blocks. Suitable for rotary use ONLY! Must not be used on percussion/hammer mode. For use with a power drill of 850 watts upward, equipped with a safety clutch and a variable speed function Do not use Diamond Cores larger than Ø78mm with SDS Plus drills as this may result in damage to the power tool or SDS adaptor. Diamond Cores give the best results when used with a purpose-built core drilling machine.1 x Faithfull Dry Diamond Core Bit 117 x 150mm
The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 110mm Diameter: 7mm Flute Length: 59mm
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 5/16in.Working length: 75mm.Overall length: 117mm.
The Faithfull Metric HSS Drill Bit Sets are designed for cutting metal, however they are also suitable for drilling holes in timber, chipboard and plywood. The sets have an easy flip open action case with transparent front for easy checking of contents. Manufactured to meet DIN 338 standard. 7 Piece M7PSET: 1.5, 2, 3, 4, 5, 5.5 and 6mm.13 Piece M13PSET: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.2, 4.5, 5, 5.5, 6 and 6.5mm.This set contains commonly used sizes from the metric range. Although designed for cutting metal, HSS drills are also suitable for drilling holes in timber, chipboard and plywood. The robust plastic case secures and protects the drills when they are stored with other tools. The contents can easily be viewed through the flip action transparent lid. Manufactured to meet DIN 338 standard. No. of drills: 7 Sizes: 1.5, 2, 3, 4, 5, 5.5, 6mm
The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135° split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5µ Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is very resistant to wear. TiN has a low coefficient of friction, this results in less power being consumed and less heat generated during the drilling.The Irwin IRW10502581 HSS Pro TiN Coated Drill Bit comes in the following:Size: 4.0 x 75mm
Used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an acurate fit we suggest you use the same screwsink from the Faithfull brand. The set of 4 contains sizes No 6, 8, 10 and 12.Cuts Size 10 Plugs (10mm)
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 2.50mm.Working length: 30mm.Overall length: 57mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 10.0mm.Working length: 87mm.Overall length: 133mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 4.0mm.Working length: 43mm.Overall length: 75mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 4.20mm.Working length: 43mm.Overall length: 75mm.
The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals. Suitable for use in most variable speed power drills.Diameter: 16mm
The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals. Suitable for use in most variable speed power drills.Diameter: 21mm
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 68 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless Drills. Specifications:Diameter: 3.5mm.Total length: 45mm.Working Length: 75mm.
Boa Quick Change Diamond Tip Drill Bits ith a vacuum brazed diamond tip, Boa Diamond Drills are developed for hard materials. This product has been 10 years in development with a welded diamond tip for greater strength and endurance. Manufactured in the UK, these drills will perform beyond expectation, and with the addition of the Boa CCV (Cool Clear Vision) guide and water cooling device this product stands out from the competition.1 x Boa Boa340015 Quick Change Diamond Tip Drill Bit 15mm
These Faithfull high-performance, tungsten carbide tipped drill bits fit into SDS Plus chucks which provide a particularly secure, non-slip grip, that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick-release keyless chuck.The drill bits are suitable for use in bricks, blocks, concrete containing aggregates, marble, hard stone and other hard masonry materials.The Faithfull FAISDS12260 SDS Drill has a heavy-duty tungsten carbide tip with the following dimensions:Diameter: 12mmWorking Length: 200mmOverall Length: 260mm
The Faithfull FAIGDSET4 is for drilling glass windows, mirrors, bottles and ceramics - for use in variable speed drills only. These drillbits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. Note: Lubricate with water for best results The Faithfull FAIGDSET4 is a set of 4 glass drills in a plastic case and comes in the following sizes: 3, 4, 5 and 6mm.
The Faithfull Professional Pre Pack Metric HSS Jobber Drill Bits are designed to meet the requirements of the professional user, these pre-packed drills are manufactured from M2 grade steel and are fully ground to meet the standard of DIN 338 and feature a 135 degree non slip split point. Suitable for use in: Alloy steels, carbon steels, cast iron, hardened alloy steels and stainless steels.The FAIPP350PRO Professional Jobber Drill Bits have the following specifications: Diameter: 3.5mm. Pack quantity: 2.
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0338 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 86mm (3.3/8in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0334 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 95mm (3.3/4in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH210M Deep Cut Bi Metal Holesaw has the following specification: Diameter: 210mm (8.9/32in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0600 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 152mm (6in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0138 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 35mm (1.3/8in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0134 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 44mm (1.3/4in).
The Bahco 9627 Series Long Combination Auger Bit is longer than a standard auger bit, designed for long reach applications. Made from hardened tool steel, lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9627 Series Long Combination Auger Bit has the following specification: Size: 14mmWorking Length: 385mmOverall Length: 460mm
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 3.60mm.Working length: 39mm.Overall length: 70mm.
The Bahco 9626 Series Combination Auger Bit is made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9626 Series Combination Auger Bit has the following specification: Size: 24mmWorking Length: 155mmOverall Length: 230mm
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 19 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 17 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, Iron and most metals. Manufactured to meet DIN 338 standard.Size. 12 mm Dia.
HSS Pro Drill long series drill bits have a body manufactured from high quality HSS steel and have a bright finish. The drill bits have precision ground cutting edges which enable fast drilling and ensure perfect finishing. They have a ground flute for maximum accuracy and fast chip removal. The universal 118º point shape makes the drill bits suitable for drilling a wide selection of materials. They are perfect for drilling low carbon steel, soft metals, wood and plastics. They are manufactured to DIN 340 standards and have a cylindrical shank.The Irwin HSS Long Pro Drill Bits come in a bulk pack of 10. Specification: Diameter: 6.0mmTotal length:140mmWorking length: 95mm.
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Size: 51 mm dia
These Faithfull high-performance, tungsten carbide tipped drill bits fit into SDS Plus chucks which provide a particularly secure, non-slip grip, that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick-release keyless chuck.The drill bits are suitable for use in bricks, blocks, concrete containing aggregates, marble, hard stone and other hard masonry materials.The Faithfull FAISDS16260 SDS Drill has a heavy-duty tungsten carbide tip with the following dimensions:Diameter: 16mmWorking Length: 200mmOverall Length: 260mm
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502774 Auger drill bit has the following dimensions:Drillbit diameter: 24.0mmTotal length: 191mmWorking Length: 126mm
The Faithfull Varipitch Holesaws are manufactured from bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Bi-metal holesaws offer increased safety as they will not shatter under load. They are ideal for use on a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals. Suitable for use in most variable speed power drills.Diameter: 14mm.
DEWALT SDS Plus XLR Full Head Carbide Drill Bits have a solid carbide tip that offers users the highest performance in the toughest applications. The 4-cutter geometry provides clean holes, high drilling speed and reduces the chance of jamming of the drill in reinforced concrete. Made from a superior hard metal alloy with an increased drill core structure for greater resistance to fracture. Optimised flute design allows for efficient debris removal. Supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. This 10 piece set contains the following sizes: 5 x 110mm, 6 x 110mm(x2), 6 x 160mm(x2), 6.5 x 160mm, 8 x 160mm(x2), 10 x 160mm and 12 x 160mm.
