The Halls MC High Speed Steel Step Drill provides an easy way to cut the hole size you want. Each tool cuts parallel hole sizes. For use on sheet metal to stated maximum thickness.Size range.20,21,22,23,24,25,26,27,28,29,30mm.Maximum Material Thickness. 4mm.Shank to fit size. 13mm. When drilling metals use a coolant.
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists. Size: 20mm
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0300 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 76mm (3in).
Quick change Blue Groove 4X Quick Change Extensions. They are used with 4X flat bits when extra drilling depth is required.The Irwin IRW10502825 Blue Groove 4X Quick Change Extension comes in the following:Size: 150mm (6 inch)
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502788 Auger drill bit has the following dimensions:Drillbit diameter: 40.0mmTotal length: 240mmWorking Length: 175mm
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 6.5mm.Working Length: 63mm.Overall Length: 101mm.
The Bahco 9626 Series Combination Auger Bit is made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9626 Series Combination Auger Bit has the following specification: Size: 11mmWorking Length: 155mmOverall Length: 230mm
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus EXTREME 2® Drill Bit has the following dimensions: Diameter: 8mmWorking Length: 400mmOverall Length: 460mmPack Quantity: 1
The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability. A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures. Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes. Suitable for masonry, brick, stone, tiles and light concrete. This DEWALT Extreme Masonry Drill Bit has the following specification: Diameter: 5mm.Overall Length: 85mm.Working Length: 50mm.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 3.3mm.Working Length: 36mm.Overall Length: 65mm.Pack Quantity: 10.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 10.5mm. Working Length: 84mm. Overall Length: 133mm.Pack Quantity: 10.
DEWALT Brad Point Drill bits are manufactured from chrome vanadium alloyed steel. A centre location point and outer cutting spurs ensure clean accurate holes. Suitable for drilling hardboard, plywood, chipboard and all natural hard and softwood. For diameters 11mm and above, the shank is reduced to 9.5mm. The DEWALT DEWDT4507QZ Brad Point drillbit has the following dimensions:Size: 7 x 110mm
The DEWALT four cutter countersink provides a clean, professional finish. They are ideal for drilling pilot holes and countersinking in one action and can be used on hard and soft wood, composite board and MDF.The DEWALT DEWDT7605QZ has the following specifications:Accessory type: No. 8 pilot bit and No. 4 countersink cutterShank: 5/16 inch
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 8.0mm.Working Length: 75mm.Overall Length: 117mm.
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 7mm.Working Length: 69mm.Overall Length: 109mm.
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 22.0mm.Total length: 460mm.Working length: 400mm.
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials.The Irwin IRW10502341 HSS Pro Drillbits comes in a bulk pack of 5. Specifications:Drillbit diameter: 11.0mm.Total length: 142mm.Working Length: 94mm.
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloy steels. They have 5% cobalt for higher heat and abrasion resistance and a heavy-duty web construction for strength and durability. The 135° split point begins drilling immediately, minimising bit walk and they are manufactured to DIN 338 Standards.The Irwin HSS Cobalt Drill Bits are supplied in a pack of 5. Specification: Diameter: 8.5mm.Total length: 117mm.Working length: 75mm.
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists. Size: 27mm
The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability. A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures. Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes. Suitable for masonry, brick, stone, tiles and light concrete. This DEWALT Extreme Masonry Drill Bit has the following specification: Diameter: 14mm.Overall Length: 200mm.Working Length: 150mm.
Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
The Dormer A108 Metric Split Point HSS Jobber Drill Bits are designed specifically for machining stainless steels. The quick spiral helix enables rapid swarf removal. Manufactured to DIN 338 RW / BS328 / ISO 235. Specification Flute Geometry: Quick Helix, Right hand spiral.Point Angle: 135°: up to 1.5mm: 135° Split Point, 1.6mm, 1/16 and above.Surface Treatment: Blue.Material: High Speed Steel.Tip diameter: 4.0mm.Working length: 43mm.Overall length: 75mm.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 7/32in.Working length: 57mm.Overall length: 93mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 0.80mm.Working length: 10mm.Overall length: 30mm.
