The DEWALT DCK266P2T Twin Pack, contains the following: 1 x 18V DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/0-34,000/min.Max Torque: 70Nm.Capacity: Wood: 40mm, Steel: 13mm, Masonry: 13mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage: 10.8/14.4/18V. Battery Chemistry: Li-ion Charging Current: 4.0 A. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK™ II Toolbox.
The DEWALT DCK211D2T XR Twin Pack, contains the following: 1 x 10.8 Volt DCD710 XR Sub Compact Drill Driver with adjustable torque control for consistent screwdriving into a variety of materials. 10mm single sleeve keyless chuck with automatic spindle lock for quick and easy bit change. All metal gearing for efficient power transmission and long tool life. Chuck: 10mm.No Load Speed: 0-400/0-1,500/min.Max Torque: 16Nm, 15 Settings.Capacity: Wood: 19mm, Steel: 10mm.Weight: 0.91kg. 1 x 10.8 Volt DCF815 XR Impact Driver with all-metal gearing and aluminium front housing that provides greater heat dispersion for increased motor life. 3 LED 'Halo' Ring provides illumination of the workpiece. Bit Holder: 6.35mm (1/4in).No Load Speed: 2,450/min.Impacts Per Minute: 3,400/min.Max Torque: 107Nm.Capacity: Bolt M12.Weight: 1.04kg. Supplied with: 2 x 10.8 Volt 2.0Ah Li-ion Batteries, 1 x 10.8-18V Multi-Voltage XR Charger and 1 x TSTAK™ V Toolbox.
The DEWALT DCK2110L2 XR Brushless Sub-Compact Twin Pack, contains the following: 1 x 12V DCD701 XR Brushless Sub-Compact Drill Driver has a lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. Compatible with your existing 10.8V batteries and tools. Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Max. Torque: 57.5Nm, 15 SettingsCapacity: Wood 20mmWeight: 0.9kg 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with your existing 10.8V batteries and tools. No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 163NmBare Unit Weight: 0.8kg Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x 10.8-18V DCB112 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box
The DEWALT DCH481 XR FlexVolt Brushless SDS Max Hammer produces a performance that rivals corded machines, the brushless motor provides extreme runtime and reduced maintenance. Rotation stop mode for chiselling and impact stop mode for rotary only drilling with dry diamond cores. Ideal for drilling anchors and fixing holes into concrete, brick and masonry up to 40mm in diameter. For increased safety, the anti rotation system detects a loss of tool control, and reacts by instantly cutting the power. It has a compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. Fitted with a bight white LED, with a delay feature for improved visibility. DCH481X2: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries.DCH481N: Bare Unit, No Battery or Charger. Specification Modes: Rotary Only, SDS Hammer, Chisel Only. No Load Speed: 540/min.Impact Rate: 0-3,150/min with 6.1 Joules.Capacity: Concrete: 40mm, Breakthough: 65mm, Core: 100mm.Weight 5.4kg.The DEWALT DCH481X2 XR FlexVolt Brushless SDS Max Hammer is supplied with: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries1 x Multi-Position Side Handle1 x Multi Voltage Charger1 x Heavy-Duty Kitbox DEWALT XR FlexVolt batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime.
The DEWALT DCH481 XR FlexVolt Brushless SDS Max Hammer produces a performance that rivals corded machines, the brushless motor provides extreme runtime and reduced maintenance. Rotation stop mode for chiselling and impact stop mode for rotary only drilling with dry diamond cores. Ideal for drilling anchors and fixing holes into concrete, brick and masonry up to 40mm in diameter. For increased safety, the anti rotation system detects a loss of tool control, and reacts by instantly cutting the power. It has a compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. Fitted with a bight white LED, with a delay feature for improved visibility. DCH481X2: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries.DCH481N: Bare Unit, No Battery or Charger. Specification Modes: Rotary Only, SDS Hammer, Chisel Only. No Load Speed: 540/min.Impact Rate: 0-3,150/min with 6.1 Joules.Capacity: Concrete: 40mm, Breakthough: 65mm, Core: 100mm.Weight 5.4kg.The DEWALT DCH481N XR FlexVolt Brushless SDS Max Hammer is supplied as a Bare Unit, No Battery or Charger Supplied.
The DEWALT DCH334X2 XR FlexVolt Brushless SDS Plus Hammer is supplied with a quick- release SDS Plus tool holder and keyless chuck for easy switching between hammer/rotary hammer and rotary only applications. Has a brushless motor for extreme runtime and reduced maintenance. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal. Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 30mm. Also fitted with a bright white LED with delay feature that improves visibility. DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime. Specification Battery Capacity: 9.0Ah@18 Volt & 3.0Ah@54 Volt.Modes: Rotary, SDS Hammer, Chisel Only. No Load Speed: 0-1,000/min.Impact Rate: 0-4,480/min with 3.5 Joules.Capacity: Concrete: 30mm, Steel: 13mm, Wood: 26mm.Weight 3.7kg.
The DEWALT DCH333 XR FlexVolt Brushless SDS Plus Hammer has a brushless motor for extreme run time and reduced maintenance. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal. Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 30mm. Also fitted with a bright white LED with delay feature that improves visibility. DCH333X2: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries.DCH333NT: Bare Unit, No Battery or Charger. Specification Modes: Rotary, SDS Hammer, Chisel Only. No Load Speed: 0-1,000/min.Impact Rate: 0-4,480/min with 3.5 Joules.Capacity: Concrete: 30mm, Steel: 13mm, Wood: 26mm.Weight 3.7kg.The DEWALT DCH333X2 XR FlexVolt Brushless SDS Plus Hammer is supplied with: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries1 x Belt Hook1 x Multi-Position Side Handle1 x Multi Voltage Charger1 x Heavy-Duty Kitbox DEWALT XR FlexVolt batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased run time.
The DEWALT DCH333 XR FlexVolt Brushless SDS Plus Hammer has a brushless motor for extreme run time and reduced maintenance. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal. Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 30mm. Also fitted with a bright white LED with delay feature that improves visibility. DCH333X2: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries.DCH333NT: Bare Unit, No Battery or Charger. Specification Modes: Rotary, SDS Hammer, Chisel Only. No Load Speed: 0-1,000/min.Impact Rate: 0-4,480/min with 3.5 Joules.Capacity: Concrete: 30mm, Steel: 13mm, Wood: 26mm.Weight 3.7kg.The DEWALT DCH333NT XR FlexVolt SDS Plus Hammer is supplied as a Bare Unit, No Battery or Charger supplied.
The DEWALT DCH273 Brushless XR SDS Plus Hammer has a category-leading high speed drilling performance at more than 90 holes (10 x 80mm) per charge. With a rotation stop mode for light chiselling in plaster, tiles and render, and impact stop mode for rotary only drilling in wood and metal. The brushless motor and high capacity XR 18V 5.0Ah Lithium-ion battery platform provide extreme run time and reduced maintenance. It is fitted with an electronic clutch for consistently high torque and improved durability and is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4 to 24mm. Its compact, lightweight and ergonomic design provide improved comfort and support during extended operating periods. It also has a bright white LED with delay feature for improved visibility. DCH273P2: 2 x 18V 5.0Ah Li-ion BatteriesDCH273N: Bare Unit, No Battery or Charger Specification: Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg Hand/Arm Vibration: Drilling 6.6m/s², Chiselling 5.4m/s², Metal 2.5m/s²Uncertainty: K1/K2/K3 (Vibration): 1.5m/s² Sound Pressure: 86 dBASound Pressure Uncertainty: 3 dBASound Power: 97 dBASound Power Uncertainty: 3 dBAThe DEWALT DCH273P2 Brushless XR 3 Mode Hammer is supplied with: 2 x 18V 5.0Ah Li-Ion Batteries1 x Multi-Voltage XR Li-Ion Charger1 x Belt Hook1 x Multi-Position Side Handle1 x Heavy-Duty Kitbox
The DEWALT DCH273 Brushless XR SDS Plus Hammer has a category-leading high speed drilling performance at more than 90 holes (10 x 80mm) per charge. With a rotation stop mode for light chiselling in plaster, tiles and render, and impact stop mode for rotary only drilling in wood and metal. The brushless motor and high capacity XR 18V 5.0Ah Lithium-ion battery platform provide extreme run time and reduced maintenance. It is fitted with an electronic clutch for consistently high torque and improved durability and is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4 to 24mm. Its compact, lightweight and ergonomic design provide improved comfort and support during extended operating periods. It also has a bright white LED with delay feature for improved visibility. DCH273P2: 2 x 18V 5.0Ah Li-ion BatteriesDCH273N: Bare Unit, No Battery or Charger Specification: Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg Hand/Arm Vibration: Drilling 6.6m/s², Chiselling 5.4m/s², Metal 2.5m/s²Uncertainty: K1/K2/K3 (Vibration): 1.5m/s² Sound Pressure: 86 dBASound Pressure Uncertainty: 3 dBASound Power: 97 dBASound Power Uncertainty: 3 dBAThe DEWALT DCH273N Brushless XR 3 Mode Hammer is supplied as a bare unit, no battery or charger supplied.
The DEWALT DCH253 18 Volt SDS Plus Rotary Hammer Drill is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. The DCH253 features best in class vibration (6.6m/s²) to reduce user fatigue and maximise operating periods. A bright white LED with delay feature improves visibility. Specification Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 JoulesCapacity: Concrete: 24mm, Steel: 13mm, Wood: 26mmWeight 3.1kgDEWALT DCH253N SDS Plus Rotary Hammer 18 Volt Bare Unit, Batteries and charger Not Supplied.
The DEWALT DCH253 18 Volt SDS Plus Rotary Hammer Drill is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. The DCH253 features best in class vibration (6.6m/s²) to reduce user fatigue and maximise operating periods. A bright white LED with delay feature improves visibility. Specification Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 JoulesCapacity: Concrete: 24mm, Steel: 13mm, Wood: 26mmWeight 3.1kgDEWALT DCH253 M2 SDS Plus Rotary Hammer 18 Volt. Supplied with: 2 x 18 Volt 4.0Ah XR Li-Ion Batteries, 1 x Multi-Voltage Li-Ion Charger, 1 x Multi-Position Side Handle and 1 x Heavy-Duty Kit Box.
The DEWALT Cordless XR Grease Gun performs routine lubrication up to twice as fast as a manual grease gun, with 690 bar (10,000 PSI) of output pressure and a flow rate of 147g per minute. It delivers high pressure to clear clogged fittings and has a purge valve that allows the user to bleed excess air that can become trapped in pump valves. It has a 1 meter hose, for hard-to-reach fittings and an LED light, to illuminate fittings that are difficult to locate. The innovative pump filter screen on the unit helps to keep dirt from passing through the pump mechanism. It can be bulk-filled (suction or pump) or used with standard 400g grease cartridges. Includes a shoulder strap for carrying the unit during applications, 1 x 18 Volt 4.0Ah XR Li-Ion battery pack with state of charge indicator, an XR Multi-Voltage charger and a heavy-duty kitbox. Specification Output Pressure: 690bar/ 10,000 PSI.Feed Rate:147g/min. Grease Type: Up to NLGI #2. Grease Capacity: Bulk: 453g, Cartridge: 400g. Hose Length: 1000mm. Height: 230mm. Length: 390mm.Built in LED light
The DEWALT DCG426 XR Brushless Die Grinder provides increased performance, even in demanding applications thanks to the 18V motor. It is fitted with a 3-step speed dial for improved application control and a dual position variable speed switch. A mesh guard helps to reduce motor contamination and the air stream is directed away from user. The die grinder has an improved gripping area and a durable, textured rubber nose for increased comfort and control. It is also fitted with an LED nose ring for improved work piece visibility. DCG426P2: 2 x 18V 5.0Ah Li-ion BatteriesDCG426N: Bare Unit, No Battery or Charger Specification No Load Speed: 0-5,000/17,500/25,000/min.Max. Wheel Diameter: 38mm.Spindle Thread: M15.Collet Size: 6mm.Weight: 1.19kg.The DEWALT DCG426P2 DCG426 XR Brushless Die Grinder is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x 6mm Collet1 x Spanner1 x Multi-Voltage Charger1 x Heavy-Duty Kitbox
The DEWALT DCG426 XR Brushless Die Grinder provides increased performance, even in demanding applications thanks to the 18V motor. It is fitted with a 3-step speed dial for improved application control and a dual position variable speed switch. A mesh guard helps to reduce motor contamination and the air stream is directed away from user. The die grinder has an improved gripping area and a durable, textured rubber nose for increased comfort and control. It is also fitted with an LED nose ring for improved work piece visibility. DCG426P2: 2 x 18V 5.0Ah Li-ion BatteriesDCG426N: Bare Unit, No Battery or Charger Specification No Load Speed: 0-5,000/17,500/25,000/min.Max. Wheel Diameter: 38mm.Spindle Thread: M15.Collet Size: 6mm.Weight: 1.19kg.The DEWALT DCG426N XR Brushless Die Grinder is supplied as a bare unit, no battery or charger supplied.
The DEWALT DCG412 125mm XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. The powerful and highly efficient PM58 DEWALT fan cooled motor has replaceablebrushes, and delivers up to 7,000 rotations per minute for fast cutting and grinding applications. It has steel cut spiral bevel gears which provide the highest level of durability and low vibration, increasing user productivity and the low profile jam pot gear case improves gear durability and ergonomics. DCG412M2: 2 x 18v 4.0Ah XR Li-ion Batteries. DCG412M2: 1 x 18v 4.0Ah XR Li-ion Battery.DCG412N: Bare Unit, No Battery or Charger. Specification No Load Speed: 7,000/min.Disc Diameter: 125mmSpindle: M14Weight: 3.0kgDEWALT DCG412N 125mm XR Premium Angle Grinder 18V Bare Unit, No Battery or Charger Supplied.
The DEWALT DCG412 125mm XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. The powerful and highly efficient PM58 DEWALT fan cooled motor has replaceablebrushes, and delivers up to 7,000 rotations per minute for fast cutting and grinding applications. It has steel cut spiral bevel gears which provide the highest level of durability and low vibration, increasing user productivity and the low profile jam pot gear case improves gear durability and ergonomics. DCG412M2: 2 x 18v 4.0Ah XR Li-ion Batteries. DCG412M2: 1 x 18v 4.0Ah XR Li-ion Battery.DCG412N: Bare Unit, No Battery or Charger. Specification No Load Speed: 7,000/min.Disc Diameter: 125mmSpindle: M14Weight: 3.0kgDEWALT DCG412M2 125mm XR Premium Angle Grinder 18 Volt It is supplied with a 2 position side handle, keyless protective guard, blade wrench, multi-voltage charger, 2 x 4.0Ah XR Li-ion battery packs with state of charge indicator and a heavy-duty kit box.
The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. DCG405P2: 2 x 18 Volt 5.0Ah Li-ion BatteriesDCG405N: Bare Unit, No Battery or Charger Specification: No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 1.75kg.The DEWALT DCG405P2 XR Brushless Grinder is supplied with: 2 x 18 Volt 5.0Ah Li-ion Batteries1 x 2 Position Side Handle1 x Keyless Protective Guard1 x Blade Wrench1 x Multi-Voltage Charger
The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. DCG405P2: 2 x 18 Volt 5.0Ah Li-ion BatteriesDCG405N: Bare Unit, No Battery or Charger Specification: No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 1.75kg.The DEWALT DCG405N XR Brushless Grinder is supplied as a bare unit, no battery or charger supplied.
The DEWALT DCG200T2 XR FlexVolt Wall Chaser offers unrivalled run time and performance. Heavy-duty construction applications can be completed without the need for mains power. The high torque, brushless motor is perfect for wall chasing applications. The 2 diamond discs have been engineered to cut simultaneously into material. There is also an easy-to-use tool free blade height adjustment setting with park position. Once the in-between material is removed, the channel can be used to sink wires or pipes below surface. The Wireless Tool Control (WTC) transmitter allows the tool to be wirelessly paired with another WTC device such as a dust extractor, enabling for automatic activation and shutdown. DCG200T2: 2 x 18/54V 6.0/2.0Ah Li-ion BatteriesDCG200NT: Bare Unit, No Battery or Charger Specification: No Load Speed: 9,000/min.Cutting Depth: 0-32mmMax. Groove Width: 35mmDisc Size: 125mmWeight: 3.7kgThe DEWALT DCG200T2 XR FlexVolt Wall Chaser is supplied with: 2 x 18/54V 6.0/2.0Ah Li-ion Batteries2 x Premium Diamond Blades1 x Set of Spacers (3, 6, 9 & 12mm)1 x Chisel1 x Hex Blade Wrench1 x Deep TSTAK Kit Box
The DEWALT DCG200T2 XR FlexVolt Wall Chaser offers unrivalled run time and performance. Heavy-duty construction applications can be completed without the need for mains power. The high torque, brushless motor is perfect for wall chasing applications. The 2 diamond discs have been engineered to cut simultaneously into material. There is also an easy-to-use tool free blade height adjustment setting with park position. Once the in-between material is removed, the channel can be used to sink wires or pipes below surface. The Wireless Tool Control (WTC) transmitter allows the tool to be wirelessly paired with another WTC device such as a dust extractor, enabling for automatic activation and shutdown. DCG200T2: 2 x 18/54V 6.0/2.0Ah Li-ion BatteriesDCG200NT: Bare Unit, No Battery or Charger Specification: No Load Speed: 9,000/min.Cutting Depth: 0-32mmMax. Groove Width: 35mmDisc Size: 125mmWeight: 3.7kgThe DEWALT DCG200NT XR FlexVolt Wall Chaser is supplied as a Bare Unit, No Battery or Charger.
The DEWALT DCFS950 Brushless XR Fencing Stapler is the first dedicated fencing stapler that features a powerful single flywheel system taken from our most powerful cordless nailer. Sequential mode enables careful exact placement and higher accuracy whilst stapling. RAPIDCYCLE™ mode is intended for quick repetitive operation. Dry fire lockout ensures that the tool is protected from firing without nails in the magazine. Designed for agricultural, industrial or civil engineering support, it will drastically reduce the time it takes to install wire fencing perimeters. DCFS950P2: 2 x 18V 5.0Ah Li-ion BatteriesDCFS950N: Bare Unit, No Battery or Charger Specification: Nail Length: 40-50mmNail Diameter: 4mmMagazine Capacity: 35 NailsWeight: 4.1kgThe DEWALT DCFS950P2 Brushless XR Fencing Stapler is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x Multi-Voltage Charger1 x Heavy-Duty Kit Box
The DEWALT DCF902 XR Sub-Compact Impact Wrench is 33mm shorter than the previous generation, allowing access into small spaces. It has an efficient brushless motor with 3 electronic speeds for greater control when working on precise applications. Precision Wrench mode allows for the best control in delicate applications. Lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. The state of charge battery pack allows users to keep track of battery charge easily to prevent running out of battery during a job. Compatible with your existing 10.8V batteries and tools. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger, 1 x Belt Hook and 1 x TSTAK compatible Carry Case. Specification: Bit Holder: 3/8in SquareNo Load Speed: 0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 168NmBare Unit Weight: 0.8kg
The DEWALT DCF897 XR Impact Wrench with a 3/4in cold forged anvil with hog ring retention pin for durability and allows fast and frequent change of sockets without aligning any pins. Its brushless motor provides durable power and excellent runtime. Features variable speed, 3 speed select control or application specific torque and drive control. It produces a high torque of 950Nm, Break Away at 1,627Nm, delivering excellent performance for various applications. The wrench has an ergonomic grip for comfortable use and has been drop tested for enhanced durability. There is also a super-bright LED on the foot to avoid shadow and casts light at the point of application. Bare Unit, No Battery or Charger Supplied. Specification: Bit Holder: 3/4in Hog RingNo Load Speed: 0-400/1,200/1,900/min.Impact Rate: 0-2,400/bpmMax. Torque: 950Nm, Breakaway Torque: 1,627NmWeight: 2.6kg
