The DEWALT DCF902 XR Sub-Compact Impact Wrench is 33mm shorter than the previous generation, allowing access into small spaces. It has an efficient brushless motor with 3 electronic speeds for greater control when working on precise applications. Precision Wrench mode allows for the best control in delicate applications. Lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. The state of charge battery pack allows users to keep track of battery charge easily to prevent running out of battery during a job. Compatible with your existing 10.8V batteries and tools. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger, 1 x Belt Hook and 1 x TSTAK compatible Carry Case. Specification: Bit Holder: 3/8in SquareNo Load Speed: 0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 168NmBare Unit Weight: 0.8kg
The DEWALT DCF897 XR Impact Wrench with a 3/4in cold forged anvil with hog ring retention pin for durability and allows fast and frequent change of sockets without aligning any pins. Its brushless motor provides durable power and excellent runtime. Features variable speed, 3 speed select control or application specific torque and drive control. It produces a high torque of 950Nm, Break Away at 1,627Nm, delivering excellent performance for various applications. The wrench has an ergonomic grip for comfortable use and has been drop tested for enhanced durability. There is also a super-bright LED on the foot to avoid shadow and casts light at the point of application. Bare Unit, No Battery or Charger Supplied. Specification: Bit Holder: 3/4in Hog RingNo Load Speed: 0-400/1,200/1,900/min.Impact Rate: 0-2,400/bpmMax. Torque: 950Nm, Breakaway Torque: 1,627NmWeight: 2.6kg
The DEWALT DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. Fitted with a high power, brushless motor that is capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. It has a super lightweight and compact design that is very comfortable to use and fits in small spaces. The 3 LED, Halo light ring offers excellent work piece lighting. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/Min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max Torque: 26/80/205Nm.The DEWALT DCF887P2 XR Brushless 3 Speed Impact Driver is supplied with: 2 x 18 Volt 5.0Ah Li-Ion Batteries*. 1 x Multi-Voltage XR Charger. 1 x Belt Hook. 1 x Magnetic Bit Holder. 1 x TSTAK Compatible Kitbox. The DEWALT 5.0Ah XR Battery Packs offer greater run time and compatibility with all of your other 18 Volt XR DEWALT Power Tools. *with state of charge indicator.
The DEWALT DCF887M1 XR Impact Driver is equipped with application control, 3 motor speeds and torque settings. Precision drive mode offers additional control in screwdriving applications to avoid material and fastener damage. Fitted with a high-power, brushless motor that is capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. It has a super lightweight and compact design and a 3 LED, halo light ring. Supplied with: 1 x 18V 4.0Ah Li-ion Battery, 1 x Belt Hook, 1 x Magnetic Bit Holder, 1 x Multi-Voltage XR Charger and 1 x Toolbox. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-3,800/bpmMax. Torque: 205NmCapacity: Bolt M12Weight: 1.34kg
The DEWALT DCF801 XR Sub-Compact Impact Driver is 33mm shorter than the previous generation, allowing access into small spaces. It has an efficient brushless motor with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. The state of charge battery pack allows users to keep track of battery charge easily to prevent running out of battery during a job. Compatible with your existing 10.8V batteries and tools. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger, 1 x Belt Hook and 1 x TSTAK compatible Carry Case. Specification: No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 163NmBare Unit Weight: 0.8kg
The DEWALT DCF622 XR Brushless Self Drilling Screwdriver is ideal for the quick fitting of metal roofing and other sheet metal applications. It's versa-clutch delivers a repeatable screw setting with minimum fuss. Fitted with a high torque brushless motor that drives screws up to 6.15mm diameter efficiently and effectively offering maximum run time and a compact tool. Durable, ergonomic design and rubber grip for improved user comfort. DCF622P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCF622N: Bare Unit, No Battery or Charger Supplied. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,000/min.Max Torque: 11/34Nm. Max Screw Diameter: 6.15mm.Length: 255mm. Height: 265mm.Weight: 1.97kg.The DEWALT DCF622N XR Brushless Self Drilling Screwdriver is supplied as a Bare Unit
The DEWALT DCF620N Drywall Screwdriver has a powerful brushless motor that drives screws efficiently and effectively, offering maximum run time and a compact tool. It has a lightweight compact design that allows you to work comfortably in small spaces. The Set and Forget feature remembers your fine depth adjustment setting when removing and replacing the nose cone and there is a trigger lock that lets you work without having to pull the trigger. It is fitted with an ergonomically designed rubber grip that gives excellent user comfort whilst using the tool in either the in-line or pistol-grip hand position. Other features include an LED work light and an angled belt hook which can be positioned for left or right handed users that fixes the tool strongly onto your tool belt/pouch. DCF620P2K: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCF620N: Bare Unit, No Battery Or Charger Supplied. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-4,400/min.Max Torque: 5-30Nm. Head Length: 220mm.Length: 262mm. Height: 203mm.Weight: 1.08kg.The DEWALT DCF620P2K Brushless Collated Drywall Screwdriver is supplied with: 2 x 18 Volt 5.0Ah Li-Ion Batteries1 x DCF6201 Collated Screw Magazine1 x DT7205-QZ PR2 Collated Screw Bit1 x Single Screw Nose Cone1 x DT7520-QZ Magnetic Bit Extender With 25mm PR2 Screw Bit1 x Multi-Voltage XR Charger1 x TSTAK 2 Kitbox
The DEWALT DCF620N Drywall Screwdriver has a powerful brushless motor that drives screws efficiently and effectively, offering maximum run time and a compact tool. It has a lightweight compact design that allows you to work comfortably in small spaces. The Set and Forget feature remembers your fine depth adjustment setting when removing and replacing the nose cone and there is a trigger lock that lets you work without having to pull the trigger. It is fitted with an ergonomically designed rubber grip that gives excellent user comfort whilst using the tool in either the in-line or pistol-grip hand position. Other features include an LED work light and an angled belt hook which can be positioned for left or right handed users that fixes the tool strongly onto your tool belt/pouch. DCF620P2K: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCF620N: Bare Unit, No Battery Or Charger Supplied. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-4,400/min.Max Torque: 5-30Nm. Head Length: 220mm.Length: 262mm. Height: 203mm.Weight: 1.08kg.The DEWALT DCF620N Brushless Drywall Screwdriver is supplied as a Bare Unit, No Battery Or Charger Supplied.
The DEWALT DCF620D2K Brushless Collated Drywall Screwdriver is ideal for efficient fitting of drywall. It has a powerful BRUSHLESS motor that drives screws efficiently and effectively and which offers maximum runtime. This drywall screwdriver is one of the lightest and most compact tools on the market making it ideal for use in tight spaces. Its quick release collated screw magazine accepts most collated screws to allow the user to fit boards more quickly. The magazine rotates on the tool without removal to allow use in corners with minimum fuss. The DCF620D2K features tool free depth control and fine depth control for simple but effective setting. Its LED worklight offers valuable light when working in small spaces or areas with limited light. A trigger lock allows comfortable, prolonged work. The DCF620D2K has an ergonomically designed rubber grip for excellent user comfort whilst using the tool in either the 'in-line' or 'pistol-grip' hand position. It is also supplied with locking nose cone, allowing work with the same tool on sites where collated drywall screws are not supplied. The 'Set and forget' feature remembers your fine depth adjustment setting when removing and replacing the nose cone. Supplied with: 2 x 18 Volt 2.0Ah XR Li-Ion Batteries, 1 x Multi-Voltage XR Charger, 1 x DCF6201 Collated Screw Magazine, 1 x DT7205-QZ PR2 Collated Screw Bit, 1 x Single Screw Nose Cone, 1 x DT7520-QZ Magnetic Bit Extender with 25mm PR2 Screw Bit and 1 x TSTAK 2 Kitbox. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-4,400/min.Torque: 5-30Nm.Collated Head Capacity: 55mm.Weight: 1.88kg.
The DEWALT DCF601 XR Brushless Sub-Compact Screwdriver is 36mm shorter than the previous generation, allowing access into small spaces. Its lightweight design provides ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. The state of charge battery pack allows users to keep track of battery charge easily to prevent running out of battery during a job. Compatible with your existing 10.8V batteries and tools. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger, 1 x Belt Hook and 1 x TSTAK compatible Carry Case. Specification: No Load Speed: 0-1,100/min. Max Torque: 8Nm, 16 SettingsBare Unit Weight: 0.68kg
The DEWALT DCE0825D1G 5 Spot Cross Line Laser Green projects a full cross line (horizontal & vertical) and 5 independent spot points. The cross line function features a 150° fan angle, providing ample coverage with little set-up time. It has an integrated magnetic bracket, so it can be directly mounted to metal track, ensuring accurate projections all around. The body of the level is IP54 rated, meaning it is resistant to debris/water. The overmolded housing and thick glass protect the tool and helps maintain calibration under jobsite conditions. Full-time pulse mode allows use with detector (NOT SUPPLIED) which help to maintain full brightness for visibility and extends range. Supplied with: 1 x 10.8 Volt 2.0Ah Li-ion Battery, 1 x DCB107 Battery Charger, 1 x Target Green Card, 1 x Green Glasses, 1 x Integrated Magnetic Bracket and 1 x TSTAK Compatible Kitbox. Specification: Laser Class: 2, Level Accuracy: ±3mm@10m.Self-Levelling Range: 4°.Visibility: Indoor: 30m, Dot: 45m.Thread: 1/4in.
The DEWALT DCE530 XR Cordless Heat Gun can be used for a multitude of applications on site, such as: shrinking electrical tubing, bending PVC pipes, drying materials, loosening nuts and bolts etc. It has a compact design that is easy to use. The lock-on button allows the heat gun to be kept on, improving user comfort and enabling hands-free use. It also has a lock-off safety switch which prevents the trigger from being activated accidentally during transport or storage. Supplied as a Bare Unit, no battery or charger supplied. Includes 1 x Reflector Nozzle and 1 x Surface Nozzle. Specification: Airflow: 109-190L/min. Air Temperature: 290-530°CWeight: 0.5kg
The DEWALT DCD996 XR Brushless Combi Drill has a tough three speed all metal transmission for increased run time and longer tool life. It features an improved automatic high speed for increasing the users masonry drilling speed. The electronic clutch has an 11 position adjustable torque control for optimised precision when screwdriving. The hammer drill driver has a 13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes, and an efficient intelligent trigger allowing total control over all applications. With an improved 3 position LED torch with high/medium/low settings. The high output provides a 20 minute LED delay for lighting dark work spaces. The grip design provides greater application control and maximum comfort. DCD996P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCD996P2B: 2 x 18 Volt 5.0Ah Bluetooth Li-Ion Batteries.DCD996X1: 1 x 18/54 Volt 9.0/3.0Ah FlexVolt Li-Ion Battery. Specification Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kgThe DEWALT DCD996X1 FlexVolt XR Brushless Combi Drill is supplied with: 1 x 18/54 Volt 9.0/3.0Ah FlexVolt Li-Ion Battery1 x DCB118 Fast Charger1 x TSTAK Heavy-Duty Kit Box DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased run time.
The DEWALT DCD996 XR Brushless Combi Drill has a tough three speed all metal transmission for increased run time and longer tool life. It features an improved automatic high speed for increasing the users masonry drilling speed. The electronic clutch has an 11 position adjustable torque control for optimised precision when screwdriving. The hammer drill driver has a 13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes, and an efficient intelligent trigger allowing total control over all applications. With an improved 3 position LED torch with high/medium/low settings. The high output provides a 20 minute LED delay for lighting dark work spaces. The grip design provides greater application control and maximum comfort. DCD996P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCD996P2B: 2 x 18 Volt 5.0Ah Bluetooth Li-Ion Batteries.DCD996X1: 1 x 18/54 Volt 9.0/3.0Ah FlexVolt Li-Ion Battery. Specification Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kgThe DEWALT DCD996P2 XR Brushless Combi Drill is supplied with the following: 2 x 18 Volt 5.0Ah Li-Ion Batteries.1 x Multi-Voltage XR Charger.1 x Belt Hook.1 x Magnetic Bit Holder.1 x Multi Position Side Handle.1 x TSTAK Heavy-Duty Kit Box.
The DEWALT DCD991 Brushless Drill Driver has a 3 speed, all metal high performance transmission that has been optimised for fast application speeds and improved run-time. The DEWALT-built high power, high efficiency brushless motor delivers up to 57% more run time over brushed motors. With a heavy-duty 13mm ratcheting keyless chuck with carbide inserts for superior bit gripping strength. Also fitted with a 3-Mode LED that provides lighting in dark or confined spaces up to 20 times brighter than previous models. Supplied with: 2 x 18 Volt 5.0Ah Li-Ion Batteries, 1 x Charger, 1 x Belt Hook, 1 x 360° Side Handle and 1 x Kitbox. Specification Chuck: 1.5-13mm Keyless.No Load Speed: 0-450/0-1,300/0-2,000/min.Max Torque: 95Nm, 11 Settings.Capacity: Metal: 15mm, Wood: 55mm.Weight: 2.0kg.
The DEWALT DCD796 XR Brushless Combi Drill has an ultra compact, lightweight design that makes it perfect for use in confined spaces. The 2 speed all metal transmission provides increased runtime and longer tool life with drill driver and hammer features for multiple applications. It offers a 15 position adjustable torque control for consistent screwdriving into a variety of materials. Intelligent trigger design allows for total control of application and it has an improved ergonomic design with rubber grip over mould. Part of the intelligent XR Lithium Ion Series for efficiency and making applications faster. DCD796P1: 1 x 18V 5.0Ah Li-Ion BatteryDCD796P2: 2 x 18V 5.0Ah Li-Ion BatteriesDCD796D2: 2 x 18V 2.0Ah Li-Ion BatteriesDCD796N: Bare Unit Specification Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Steel: 13mm, Masonry: 13mm, Wood: 40mmThe DEWALT DCD796P2 XR Brushless Compact Combi Drill Driver is supplied with: 2 x 18V 5.0Ah Li-Ion Batteries1 x Multi-Voltage XR Charger1 x Belt Hook1 x Magnetic Bit Holder1 x TSTAK Heavy-Duty Kitbox
The DEWALT DCD796 XR Brushless Combi Drill has an ultra compact, lightweight design that makes it perfect for use in confined spaces. The 2 speed all metal transmission provides increased runtime and longer tool life with drill driver and hammer features for multiple applications. It offers a 15 position adjustable torque control for consistent screwdriving into a variety of materials. Intelligent trigger design allows for total control of application and it has an improved ergonomic design with rubber grip over mould. Part of the intelligent XR Lithium Ion Series for efficiency and making applications faster. DCD796P1: 1 x 18V 5.0Ah Li-Ion BatteryDCD796P2: 2 x 18V 5.0Ah Li-Ion BatteriesDCD796D2: 2 x 18V 2.0Ah Li-Ion BatteriesDCD796N: Bare Unit Specification Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Steel: 13mm, Masonry: 13mm, Wood: 40mmThe DEWALT DCD796P1 XR Brushless Combi Drill is supplied with: 1 x 18V 5.0Ah Li-Ion Battery1 x Multi-Voltage XR Charger1 x Belt Hook1 x Magnetic Bit Holder1 x TSTAK Heavy-Duty Kitbox
The DEWALT DCD796 XR Brushless G2 Combi Drill features 2nd generation brushless technology for 30% more power and excellent efficiency. It has an ultra-compact, lightweight design that makes it perfect for use in confined spaces. The 2 speed all metal transmission provides increased runtime and longer tool life with drill driver and hammer features for multiple applications. It offers a 15 position adjustable torque control for consistent screwdriving into a variety of materials. Intelligent trigger design and an ergonomically designed handle for optimum comfort and control. DCD796M1: 1 x 18V 4.0Ah Li-ion BatteryDCD796M2: 2 x 18V 4.0Ah Li-ion Batteries Specification: Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmMax. Torque: 70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mmThe DEWALT DCD796M1 XR Brushless G2 Combi Drill is supplied with: 1 x 18V 4.0Ah Li-ion Battery1 x Charger1 x TSTAK Carry Case
The DEWALT DCD740 is a powerful 18 Volt XR Li-Ion compact lightweight Angle Drill Driver featuring the NEW XR Li-Ion battery technology. Ultra compact, lightweight design which allows for drilling and screwdriving applications in confined spaces. The multi grip trigger provides comfort and convenience by allowing the user to operate the trigger from various positions. The all metal gearing and right angle transmission gives increased runtime and longer tool life. Also has a bright white LED with delay feature for improved visibility and flashlight functionality. DCD740C1: 1 x 18V 1.5Ah Li-Ion BatteryDCD710N: Bare Unit, No Battery or Charger Specification Chuck Capacity: 10mm KeylessNo Load Speed: 1,800/min.Max. Torque: 35NmCapacity: Wood: 25mm, Steel: 10mmWeight: 1.70kgThe DEWALT DCD740N XR Right Angle Drill is supplied as a Bare Unit, No Battery or Charger.
The DEWALT DCD701 XR Sub-Compact Drill Driver has an efficient brushless motor that gives 15% more runtime than previous generation. Lightweight (0.9kg) design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. The state of charge battery pack allows users to keep track of battery charge easily to prevent running out of battery during a job. Compatible with your existing 10.8V batteries and tools. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger, 1 x Belt Hook and 1 x TSTAK compatible Carry Case. Specification: Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Max. Torque: 57.5Nm, 15 SettingsCapacity: Wood 20mmWeight: 0.9kg
The DEWALT DCD470 XR FlexVolt Right Angle/Diamond Core Drill delivers high-speed drilling performance, making it ideal for drilling within concrete block, brickwork or wood. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. The two variable speed function allows you to match the appropriate speed and torque depending on application. The Perform and Protect™ E-Clutch detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained, providing optimum control and safety. The adjustable bail handle and 2-position side handle provide safety, leverage and control. Its low head profile allows for better access in tight spaces, offering user versatility. There is also an LED light in the handle for enhanced visibility even when using large accessories. Bare Unit, No Battery or Charger Supplied. Specification: Chuck Capacity: 13mmNo Load Speed: 0-400/0-1,320/min.Max. Torque: 269NmCapacity: Concrete Block 152mm, Brickwork 127mm, Wood 158mm, Self Feed Holesaw 117mmWeight: 7.0kg
The DEWALT DCD240 FlexVolt XR Brushless Paddle Mixer is the ideal tool for plasterers, tilers, flooring contractors and general builders. The high power FlexVolt battery system provides the equivalent performance of a 1.8kW corded tool with the added convenience of a cordless machine. The DCD240 uses an M14 accessory connector, enabling it to be used with standard mixing paddles. It has an adjustable 5 position speed dial (300/450/550/650/725/min). When changing speeds the motor ramps up or down slowly to enable the operator to maintain sufficient control and prevent splashes. It is also fitted with a lock of switch which helps to prevent accidental starting, e.g when changing the battery. DCD240X2: 2 x 18/54V 9.0/3.0Ah Li-Ion Batteries.DCD240N: Bare Unit, No Battery or Charger. Specification Mixing Paddle: 160mm, M14 Thread.No Load Speed: 300/450/550/650/725/min.Weight: 5.1kg.The DEWALT DCD240X2 FlexVolt XR Paddle Mixer is supplied with: 2 x 18/54V 9.0/3.0Ah Li-Ion Batteries1 x Fast Charger1 x 160mm Centre Drawn Down Swirl Mixing Paddle1 x Heavy-Duty Kit Bag
The DEWALT DCD240 FlexVolt XR Brushless Paddle Mixer is the ideal tool for plasterers, tilers, flooring contractors and general builders. The high power FlexVolt battery system provides the equivalent performance of a 1.8kW corded tool with the added convenience of a cordless machine. The DCD240 uses an M14 accessory connector, enabling it to be used with standard mixing paddles. It has an adjustable 5 position speed dial (300/450/550/650/725/min). When changing speeds the motor ramps up or down slowly to enable the operator to maintain sufficient control and prevent splashes. It is also fitted with a lock of switch which helps to prevent accidental starting, e.g when changing the battery. DCD240X2: 2 x 18/54V 9.0/3.0Ah Li-Ion Batteries.DCD240N: Bare Unit, No Battery or Charger. Specification Mixing Paddle: 160mm, M14 Thread.No Load Speed: 300/450/550/650/725/min.Weight: 5.1kg.The DEWALT DCD240N FlexVolt XR Paddle Mixer is supplied as a bare unit, no battery or charger supplied.
The DEWALT DCC018N XR Triple Source Inflator is a compact and lightweight, high-performance inflator with a durable easy-to-use design. The digital gauge allows you to preset desired 'psi' and pressure display for easy display and ease, whilst the automatic shut-off feature prevents over inflation. Ideal for tackling big tasks thanks to its high/low pressure output. The inflator is capable of inflating at a rate of up to 0.35L/min. @ 6.2 bar or 0.6L/min. @ 2 bar. Includes: 1 x 12V Car Power Adaptor and 3 x Accessory Bits. Bare Unit, No Battery or Charger Supplied. Specification: Units of measure: bar, kPa, psiOutput: up to 0.35L/min. @ 6.2 bar, 0.6L/min. @ 2 barWeight: 2.7kg
