The DEWALT DCM571 FlexVolt XR Trimmer is fitted with a highly efficient brushless motor with a metal housing for increased runtime, life, durability and efficiency. The variable speed control provides a high/low setting for fast job completion over large areas. The enclosed and durable Xenoy™ battery housing provides increased protection. Includes a brush cutter adaptor kit and a brush knife, for everything from simple grass trimming to heavy-duty clearing work. DCM571X1: 1 x 18/54V 9.0/3.0Ah Li-Ion BatteryDCM571N: Bare Unit, No Battery or Charger Specification: Line Cutting Speed: 0-5,100/0-5,600/min.Cutting Width: 38cmLine Diameter: 2mmLine Supplied: 7.5mAssembled Length: 1.8mWeight: 6.6kgThe DEWALT DCM571X1 FlexVolt XR Trimmer is supplied with: 1 x 18/54 Volt 9.0/3.0Ah Li-Ion Battery1 x 8 Amp Li-Ion Charger1 x Shoulder Strap1 x Trimmer Line 2mm x 7.5m DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime. No Load Run time with Line = 54 mins (Low Speed), 44 mins (High Speed), using a 54 Volt 3.0Ah Li-Ion battery.
The DEWALT DCM571 FlexVolt XR Trimmer is fitted with a highly efficient brushless motor with a metal housing for increased runtime, life, durability and efficiency. The variable speed control provides a high/low setting for fast job completion over large areas. The enclosed and durable Xenoy™ battery housing provides increased protection. Includes a brush cutter adaptor kit and a brush knife, for everything from simple grass trimming to heavy-duty clearing work. DCM571X1: 1 x 18/54V 9.0/3.0Ah Li-Ion BatteryDCM571N: Bare Unit, No Battery or Charger Specification: Line Cutting Speed: 0-5,100/0-5,600/min.Cutting Width: 38cmLine Diameter: 2mmLine Supplied: 7.5mAssembled Length: 1.8mWeight: 6.6kgThe DEWALT DCM571N FlexVolt XR Trimmer is supplied as a Bare Unit, NO battery or charger.
The DEWALT DCM5713 Cordless FlexVolt XR String Trimmer is fitted with a 54V brushless motor which delivers the equivalent performance of a petrol trimmer. The patented gear drive means that this trimmer maintains a high cut speed, even under load. Split shaft design for ease of shipping and storage. Fitted with a dual switching paddle with high/low speed and a lock off switch for improved control. It has an over moulded secondary auxiliary handle with protection bar for added comfort, grip and control. The enclosed, durable xenoy battery housing provides increased protection. DCM5713X1: 1 x 18/54V FlexVolt 9.0/3.0Ah Li-ion BatteryDCM5713N: Bare Unit, No Battery or Charger Specification: Line Cutting Speed: 0-5,100/0-5,500/min.Cutting Width: 38cmLine Diameter: 2mmLine Supplied: 7.5mTotal Assembled Length: 1.8mWeight: 6.6kgThe DEWALT DCM5713X1 FlexVolt XR String Trimmer is supplied with: 1 x 18/54V FlexVolt 9.0/3.0Ah Li-ion Battery1 x Charger1 x 7.5m x 2.0mm Line
The DEWALT DCM5713 Cordless FlexVolt XR String Trimmer is fitted with a 54V brushless motor which delivers the equivalent performance of a petrol trimmer. The patented gear drive means that this trimmer maintains a high cut speed, even under load. Split shaft design for ease of shipping and storage. Fitted with a dual switching paddle with high/low speed and a lock off switch for improved control. It has an over moulded secondary auxiliary handle with protection bar for added comfort, grip and control. The enclosed, durable xenoy battery housing provides increased protection. DCM5713X1: 1 x 18/54V FlexVolt 9.0/3.0Ah Li-ion BatteryDCM5713N: Bare Unit, No Battery or Charger Specification: Line Cutting Speed: 0-5,100/0-5,500/min.Cutting Width: 38cmLine Diameter: 2mmLine Supplied: 7.5mTotal Assembled Length: 1.8mWeight: 6.6kgThe DEWALT DCM5713N FlexVolt XR String Trimmer is supplied as a bare unit, no battery or charger supplied.
The DEWALT DCM565 XR Brushless Chainsaw is fitted with a brushless motor for improved power and run-time. It has a lightweight, compact design that is ideal for one-handed cuts. Fitted with a variable speed trigger for single handed activation. The secondary aux-handle provides increased balance and control. Fitted with an automatic oiling system for reduced maintenance and a chain brake that stops in less than 1 second for added safety. Specification: Chain Speed: 7,68m/sBar Length: 30cmWeight: 3.3kgThe DEWALT DCM565P1 XR Brushless Chainsaw is supplied with: 1 x 18V 5.0Ah Li-ion Battery, 1 x Charger and 1 x DT20665 Chainsaw Chain and Bar 30cm.
The DEWALT DCM563 Cordless Hedge Trimmer has a compact and lightweight design for less user fatigue whilst trimming. With 55cm dual-action, laser-cut blades that have a 19mm cutting gap. Made from hardened steel for longer life and lasting sharpness. The wrap around aux handle provides a comfortable grip in multiple orientations. With Xenoy TM housing for excellent durability and impact resistance. Specification Blade Length: 55cm.Cutting Capacity: 19mm.Run Time: 75 Minutes approx.Weight: 3.4kg.The DEWALT DCM563P1 Cordless Hedge Trimmer is supplied with: 1 x 18V 5.0Ah Battery1 x Multi-Voltage Charger
The DEWALT DCM561 XR Brushless String Trimmer with 2-speed control, delivering versatility to the user for extended run time or increased performance. The patented brushless motor gear drive design provides more torque whilst maintaining cut speed, even under load. The strimmer is fitted with a professional style guard, for increased cut access and better visibility. It also has a fully variable trigger, offering total power control and a padded aux handle for optimal user comfort. Latest range extension to the XR system, professional performance with the added convenience of being battery powered. DCM561P1S: 1 x 18V 5.0Ah Li-ion BatteryDCM561N: Bare Unit, No Battery or Charger Specification: Line Cutting Speed: 0-4,600/0-6,000/min.Cutting Width: 33cmLine Diameter: 2mmLine Supplied: 7.5mWeight: 4.1kgThe DEWALT DCM561P1S XR Brushless String Trimmer is supplied with: 1 x 18V 5.0Ah Li-ion Battery1 x Fast Charger
The DEWALT DCL079 XR LED Tripod Light is perfect for all trades so work can continue no matter the light conditions. Its compact size and durable construction mean it is easy to transport and store. The tripod base provides stability and means it is less likely to be knocked over. It produces a high power, broad and even beam. Providing light output across 3 brightness settings; 1000lm, 1800lm and 3000lm for different applications. The highest setting is 30% brighter than a 500W halogen light. 3500K warmer light colour to reduce glare. The light has an adjustable angle lamp, 240° rotatable lamp head with a 200° pivot angle for optimum light positioning. It has a durable construction, the lamp head is protected by an outer shell. IP55 rated against dust and water ingress protection enabling interior and exterior use. The telescopic pole can be adjusted up to 2.2m. Collapses down to 1m high for easy transportation and storage. Fitted with a carry handle. Supplied as a bare unit, no battery or charger supplied. Specification: Voltage: 18VMax. Light Output: 1,000/1,800/3,000 LumensMax. Height: 2m
The DEWALT DCL074 XR Tool Connect™ Area Light with 3 brightness settings, up to a maximum of 5000 lumens. It has a 360° beam pattern; the precision engineered lens with 150 flutes delivers a bright even beam pattern to illuminate entire working space. Fitted with a robust roll cage for increased durability, designed to withstand tough job site environments. With the Tool Connect™ app, users can wirelessly power on and off the unit as well as customise settings such as the light intensity, alerts for low charge and set individual schedules for the day, time and intensity. There is also a tripod mount and hang hook, which allow for versatile positioning. IP54 rated for water and dust protection. Bare Unit, No Battery or Charger Supplied. Specification: Light Output: 1,500/3,200/5,000 lumens
The DEWALT DCL043 XR LED Spotlight provides a focused high intensity beam and delivers a maximum output of 1000 lumen. The beam has a distance rating of 400m and it has a rugged and durable design that is IP54 rated. The head pivots for directional lighting. Offers over 10 hours of runtime with a 5.0Ah Li-Ion Battery (NOT SUPPLIED). Bare Unit, No Battery or Charger Supplied. Specification Bulb Type: LED. Light Output: 120-1,000 Lumens. Protection Class: IP54.
The DEWALT DCL040 is the latest generation 18 Volt Work Light, using LED Technology and featuring new XR Li-Ion technology. It has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip increase comfort. The LED Bulb producing 110 Lumen output (10,000Hr Life) with a 2 zone light pattern with the flashlight head pivots more than 90 degrees vertically with ratchet lock. The Flashlight includes an integrated hook for hanging and can be used free standing, with belt clip. PLEASE NOTE: 18 Volt Battery and charger sold separately Specification Bulb Type: LED.Height: 240mm.Length: 115mm.Weight: 260g.
The DEWALT DCK694P3 Brushless 3 Speed 6 Piece Kit, contains the following: 1 x 18V DCD995 Brushless XRP Hammer Drill with a tough three speed all metal transmission for increased runtime and longer tool life. Part of the intelligent XR Lithium Ion Series designed for efficiency and faster applications. Chuck: 1.5-13mm. No Load Speed: 0-450/0-1,300/0-2,000/min. Impact Rate: 0-7,650/0-22,100/0-34,000/min. Max Torque: 80Nm. Drilling Capacity Wood: 50mm, Steel: 13mm,Masonry: 16mm. 1 x 18V DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hex.No Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpm.Max Torque: 165Nm.Capacity: Bolt M12. 1 x 18V DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18V DCG412 Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18V DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18V DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x DS300 TOUGHSYSTEM™ Toolboxes
The DEWALT DCK623P3 XR Brushless 6 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Hammer Drill Driver has an ultra compact, lightweight design. The 2 speed, all metal transmission, provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmMax. Torque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mmWeight: 1.3kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kickback reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS367 Brushless XR Reciprocating Saw has a compact design that allows for better access to hard to reach cuts. Offers improved balance and ease of handling due to central motor position. The 4 position blade clamp allows for flush cutting and improved versatility. There is a lever action keyless blade clamp for tool-free blade change and an LED work light for improved visibility of cut. No Load Speed: 0-2,900/min.Stroke Length: 28.6mmCapacity: Wood 300mm, Steel Sections & Pipes 100mm, PVC 160mmWeight: 2.3kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe 2 handed work. No Load Speed: 5,500/min.Max. Cutting Depth @90º: 64mmBlade: 184 x 16mm BoreBevel Capacity: 57° 1 x 18V XR Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended runtime and a 250-500 lumen output with broad and even beam pattern. The articulating head has 9 positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use. Bulb Type: LEDLight Output: 250-500 lumens Protection Class: IP54 Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Charger and 2 x TOUGHSYSTEM™ DS300 Toolboxes.
The DEWALT DCK368P3T XR 3 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Hammer Drill Driver which has an ultra compact, lightweight design. The two speed all metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/Min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18V DCF887 XR Brushless Impact Driver that is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/Min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18V DCH273 Brushless XR 3 Mode Hammer fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/Min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger which has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Also supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x TSTAK™ II Toolboxes.
The DEWALT DCK278P2 XR Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless. No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM™ Toolbox.
The DEWALT DCK276T2T FlexVolt Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless. ;No Load Speed: 0-450/0-1,300/0-2,000/Min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/Min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18-54 Volt DCB118 FlexVolt XR Fast Charger that will charge 54 Volt FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It has a compact design that is wall mountable and fan cooled so it can charge efficiently between 4°C and 40°C. Also supplied with: 2 x 18/54 Volt 6.0/2.0Ah FlexVolt Li-ion Batteries, 2 x Belt Hooks, 1 x Side Handle for Combi Drill and 1 x DWST1-71195 TSTAK™ Deep Toolbox.
The DEWALT DCK276P2 Brushless Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless. No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS150 TOUGHSYSTEM™ Toolbox.
The DEWALT DCK269P2 XR Twin Pack, contains the following: 1 x 18V DCF899 XR Brushless High Torque Impact Wrench with 3 speed and torque settings that gives you the control to best suit your application. The 1/2in (13mm) square drive with detent pin allows for more efficient torque delivery and excellent socket retention. Bit Holder: 1/2in Detent Pin.No Load Speed: 0-400/0-1,200/0-1,900/min.Impact Rate: 0-2,400/min.Max Torque: 950Nm, Breakaway Torque: 1,625Nm. Max Bolt Diameter: M20.Weight: 2.62kg. 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM™ Toolbox.
The DEWALT DCK266P2T Twin Pack, contains the following: 1 x 18V DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/0-34,000/min.Max Torque: 70Nm.Capacity: Wood: 40mm, Steel: 13mm, Masonry: 13mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage: 10.8/14.4/18V. Battery Chemistry: Li-ion Charging Current: 4.0 A. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK™ II Toolbox.
The DEWALT DCK211D2T XR Twin Pack, contains the following: 1 x 10.8 Volt DCD710 XR Sub Compact Drill Driver with adjustable torque control for consistent screwdriving into a variety of materials. 10mm single sleeve keyless chuck with automatic spindle lock for quick and easy bit change. All metal gearing for efficient power transmission and long tool life. Chuck: 10mm.No Load Speed: 0-400/0-1,500/min.Max Torque: 16Nm, 15 Settings.Capacity: Wood: 19mm, Steel: 10mm.Weight: 0.91kg. 1 x 10.8 Volt DCF815 XR Impact Driver with all-metal gearing and aluminium front housing that provides greater heat dispersion for increased motor life. 3 LED 'Halo' Ring provides illumination of the workpiece. Bit Holder: 6.35mm (1/4in).No Load Speed: 2,450/min.Impacts Per Minute: 3,400/min.Max Torque: 107Nm.Capacity: Bolt M12.Weight: 1.04kg. Supplied with: 2 x 10.8 Volt 2.0Ah Li-ion Batteries, 1 x 10.8-18V Multi-Voltage XR Charger and 1 x TSTAK™ V Toolbox.
The DEWALT DCK2110L2 XR Brushless Sub-Compact Twin Pack, contains the following: 1 x 12V DCD701 XR Brushless Sub-Compact Drill Driver has a lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. Compatible with your existing 10.8V batteries and tools. Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Max. Torque: 57.5Nm, 15 SettingsCapacity: Wood 20mmWeight: 0.9kg 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with your existing 10.8V batteries and tools. No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 163NmBare Unit Weight: 0.8kg Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x 10.8-18V DCB112 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box
The DEWALT DCH481 XR FlexVolt Brushless SDS Max Hammer produces a performance that rivals corded machines, the brushless motor provides extreme runtime and reduced maintenance. Rotation stop mode for chiselling and impact stop mode for rotary only drilling with dry diamond cores. Ideal for drilling anchors and fixing holes into concrete, brick and masonry up to 40mm in diameter. For increased safety, the anti rotation system detects a loss of tool control, and reacts by instantly cutting the power. It has a compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. Fitted with a bight white LED, with a delay feature for improved visibility. DCH481X2: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries.DCH481N: Bare Unit, No Battery or Charger. Specification Modes: Rotary Only, SDS Hammer, Chisel Only. No Load Speed: 540/min.Impact Rate: 0-3,150/min with 6.1 Joules.Capacity: Concrete: 40mm, Breakthough: 65mm, Core: 100mm.Weight 5.4kg.The DEWALT DCH481X2 XR FlexVolt Brushless SDS Max Hammer is supplied with: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries1 x Multi-Position Side Handle1 x Multi Voltage Charger1 x Heavy-Duty Kitbox DEWALT XR FlexVolt batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime.
The DEWALT DCH481 XR FlexVolt Brushless SDS Max Hammer produces a performance that rivals corded machines, the brushless motor provides extreme runtime and reduced maintenance. Rotation stop mode for chiselling and impact stop mode for rotary only drilling with dry diamond cores. Ideal for drilling anchors and fixing holes into concrete, brick and masonry up to 40mm in diameter. For increased safety, the anti rotation system detects a loss of tool control, and reacts by instantly cutting the power. It has a compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. Fitted with a bight white LED, with a delay feature for improved visibility. DCH481X2: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries.DCH481N: Bare Unit, No Battery or Charger. Specification Modes: Rotary Only, SDS Hammer, Chisel Only. No Load Speed: 540/min.Impact Rate: 0-3,150/min with 6.1 Joules.Capacity: Concrete: 40mm, Breakthough: 65mm, Core: 100mm.Weight 5.4kg.The DEWALT DCH481N XR FlexVolt Brushless SDS Max Hammer is supplied as a Bare Unit, No Battery or Charger Supplied.
The DEWALT DCH334X2 XR FlexVolt Brushless SDS Plus Hammer is supplied with a quick- release SDS Plus tool holder and keyless chuck for easy switching between hammer/rotary hammer and rotary only applications. Has a brushless motor for extreme runtime and reduced maintenance. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal. Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 30mm. Also fitted with a bright white LED with delay feature that improves visibility. DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime. Specification Battery Capacity: 9.0Ah@18 Volt & 3.0Ah@54 Volt.Modes: Rotary, SDS Hammer, Chisel Only. No Load Speed: 0-1,000/min.Impact Rate: 0-4,480/min with 3.5 Joules.Capacity: Concrete: 30mm, Steel: 13mm, Wood: 26mm.Weight 3.7kg.
