The Broadfix Flat Packers have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber flat packers. This also makes them more economical. They are colour coded depending on size, for easy identification. Sometimes referred to as a glazing packer or shim, and is a great multi-purpose shim. They are ideal for narrower shimming jobs. Stack to the required depth, slide in and you're done. The micro ridged surface prevents slippage under load.This Broadfix Flat Packers Mixed Set is supplied in a robust tub, that can be refilled with the bagged range once you run low. Has the following specification: Size: 100 x 28mm, Thickness: 1-6mm.Number of Pieces: 300.
The Primaflow QQM Angle Iso Valve is a reliable solution for plumbing needs. Made from durable brass, this 15mm valve ensures effective isolation in various applications.
Durable Brass Construction: Ensures longevity and reliability.
15mm Size: Perfect for standard plumbing installations.
Easy Installation: Designed for straightforward setup in tight spaces.
Effective Isolation: Ideal for controlling water flow in plumbing systems.
Versatile Use: Suitable for both residential and commercial applications.
The McAlpine T12 1½" x 1¼" BSP Coupling is a plumbing fitting used to connect a 1½ inch pipe to a 1¼ inch BSP (British Standard Pipe) fitting. The "T12" in the description refers to the specific model of the coupling, which is manufactured by McAlpine, a UK-based company that specializes in plumbing and drainage products.
The coupling is designed with one end that fits a 1½ inch pipe and the other end with a 1¼ inch BSP thread. The BSP thread is a type of threading used in the UK for connecting pipes and fittings. The coupling is typically used to connect two pipes of different sizes in a plumbing system.
Overall, this type of coupling is commonly used in plumbing applications where a secure, leak-free connection is required. The McAlpine T12 1½" x 1¼" BSP Coupling is made from high-quality materials and is designed to provide reliable performance over an extended period of time.
The McAlpine S28M-NRV Multifit In-Line Non-Return Valve is a plumbing component designed to prevent water or other liquids from flowing back into the system once they have been pumped out. This is important for maintaining the integrity of the system and preventing contamination.
The valve is designed to be installed in-line with the plumbing system, and it features a top access point for easy cleaning and maintenance. This makes it ideal for use in applications where regular cleaning is required, such as in commercial kitchens or other areas where food or other materials may become trapped in the system.
The valve is part of the McAlpine Multifit range, which means it is compatible with a wide range of plumbing systems and can be easily installed without the need for specialist tools or knowledge. It is made from high-quality materials to ensure durability and long-lasting performance.
Overall, the McAlpine S28M-NRV Multifit In-Line Non-Return Valve is a reliable and effective solution for preventing backflow in plumbing systems, and its top access point makes it easy to clean and maintain.
・ Available in 1¼" and 1½" sizes
・ Prevents back flow of water
・ Must be installed in the horizontal position
・ Should only be used when there is no alternative
・ Universal Connections
This lump/club hammer has been designed with a one-piece forged construction for strength and durability. The patented anti-vibe technology reduces vibration transmitted to wrist and elbow. Ideal for use in confined work areas with little room for a full arc-swing. The wide face makes it ideal for striking chisels and punches.Weight 1360g (3 lb)
The Irwin 614R Sabre Saw Blades include colour coded packaging and labelling on the blade to easily identify the right blade for the right application. These metal cutting blades have bi-metal construction with improved tooth configuration for up to 50% faster cutting. They are made with 8% Cobalt to keep teeth sharper for longer. The blades cut all metals, including non-ferrous, pipe conduit, stainless and sheet metal. Length: 150mm.Teeth: 14 tpi (1.8mm).
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument Drain Test Plug is suitable for blocking off small pipes such as copper for dry testing prior to commissioning. It cannot be used for air testing purposes by itself. Diameter range: 37-45mm. Maximum allowable back pressure: 60psi (4bar).
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument 1378Z Drain Testing Plug. Size: 100 mm (4 in).Capable of sealing against pressures of up to 1.97 bar / 29 psi.
The Sylglas waterproofing tapes are self-adhesive, flexible and used for general waterproofing and sealing jobs around the home and garden. Uses include:Sealing exposed glazing bars on conservatories, greenhouses and cold frames.Sealing and repairing gutters and down pipes.Waterproofing of insulation or pipe lagging. Protection of above ground metal and garden tools from corrosion.The Sylglas SYLWT100 waterproofing tape has the following dimensions:Size: 100mm wide4 metre rolll
The DEWALT 50mm Impact Torsion & Magnetic Screwlock Sleeve Sets The impact bits that have a 15° torsion zone that allows the screwdriver bit to flex rather than breaking and the Full Fit head prevents the rounding of the screw head and prevents 'cam out' (bit head slipping out of screw head due to the turning force). The Magnetic Screwlock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws.DEWALT Impact Torsion 2 x PH2 50mm and Magnetic Screwlock Sleeve.
Tacwise Flat Wire Staple. Ideal for breather membrane (Tyvek, etc), building paper and insulation. For hand/electric staple guns and hammer tackers using 140, T50, G type staples. Compatible with Tacwise A14014V.Size: 10mm.Pack quantity: 2000.
Rapid VR16 hog rings are designed for use with the Rapid FP20 and FP216 Fence Pliers. 1.3mm diameter steel. Fix to wire from 2 to 8mm diameter. Please check your fence pliers for compatible sizes. Available in galvanised or green coated steel.1 x Pack of 1,390 Rapid VR16 Fence Hog Rings Galvanised
Rapid No. 13 precision cut fine wire staples are made from high-performance stainless steel for strength and durability. The thin wire makes the fixed staple almost invisible, ideal for craft and textiles where the staple will have minimal effect on the fibres. Stainless steel wire classification class 2 AISI 304 ideal for outdoor use or use in humid areas. Type: 13 (stainless steel).Size: 6mm leg lengthQuantity: 2,500. For use with the Rapid MS610, R13, R83, R23, R30, R33, MS813, R19, ESN113 and R213 tackers.
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised).Size: 12mm leg length.Quantity: 5,000. For use with the Rapid R44, R64, R34, MS840, Alu 740, R211, R54, E-Tac, CSN140 and ESN114 tackers.
The Lessmann Steel File Cleaning Brush is ideal for for cleaning wood and metal files. The file card is glued to the wooden body. Length: 250mm.Filling Surface: 115 x 38mm.
The Bosch Standard for Metal Cutting Disc cuts reliably through metal. This aluminium oxide disc is designed for general use with metal. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413.Specifications:Diameter: 115mmThickness: 1.0mmBore: 22.23mm
The DEWALT Sanding belts have a heavy-duty backing cloth, resin bonded for use with belt sanders. They provide excellent grain adhesion and heat resistance for power sanding and have a high quality aluminium oxide grain for fast, aggressive stock removal and fine finishing. Anti static bond and backing ensures more efficient dust extraction, improved finish and longer life. Applications: for all stripping, sanding and finishing tasks on wood, metal and painted surfaces.Pack of 3 Sanding Belts 356 x 64mm 100g
The Red Gorilla one-piece plastic Gorilla Shovel™ is made from very thick, high-quality polypropylene that is UV and frost-resistant. As such, it will not rust and is non-sparking. Designed for builders, it can withstand any task in any weather. Lightweight yet strong, it is perfect to use for debris, rubble and sand. The weather resistant properties also make it ideal for farm, agricultural, equine and garden use. Length: 101cmBlade Width: 31cmWeight: 1.2kg1 x Red Gorilla One-Piece Gorilla Shovel™ Red
Designed for Tradesmen, this bevel edged wood chisel has a ground finished, hardened and tempered alloy steel blade, with a one piece, solid impact resistant blue polypropylene plastic handle.The blade is lacquered for rust prevention. The 0-16-130 chisel set contains:4 x 5002 Wood chisels 6mm (1/4 in), 12mm (1/2 in), 18mm (3/4 in) and 25mm (1 in).1 x Carry Case.1 x Oil.1 x Sharpening stone.
The Red Gorilla Complete Gorilla Broom® has been designed with unique features to make your job easier. Fitted with an integrated scraper blade, makes removing ‘stuck bits’ even easier. The anti-clog channel cuts down flying dust for a clean sweeping action. The extra wide head means you can shift more with minimal effort. Ideal for use in wet environments, as the non-porous polymer head and bristles won't absorb any fluid. Excellent to use on various floor types: rubber, hard and decking. Made from UV and frost-resistant materials, meaning it can be kept outside all year without fading or cracking.1 x Red Gorilla Complete Gorilla Broom® Yellow 50cm
The Gorilla Waterproof Coat & Seal is a flexible, rubberised coating sealing out water, air and moisture. Perfect for repairing leaks, the liquid is easy to apply – you simply brush it, roll it or pour it. The self-levelling formula seals and protects by smoothly covering small gaps and cracks to create a weatherproof, watertight seal. Great for: roofing, gutters, drainage pipes, external chimneys, conservatories, windows, uPVC, caravans.
1 x Gorilla Gorilla Waterproof Coat & Seal Clear 473ml.
These Forgefix High Tensile Hex Head Bolts are made from 8.8 grade steel. The bolts are part threaded and conform to DIN 933 standards. The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools. APPLICATION:For fastening together numerous types of material or to be fastened into pre-tapped holes. Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrityHigh Tensile Bolts ZP M10 x 80 Bag 10
The Bulldog Snow Shovel is the perfect tool for scooping up snow in winter and leaves in autumn. It has a strong, plastic D-handle and a lightweight aluminium shaft with soft grip, to ensure comfort even in cold weather. The wide, tough plastic moulded blade features a metal edge for breaking and scraping ice. Specification: Length (Handle to Blade Tip): 135cmBlade Size: 31.5 x 45.5cmScoop Depth: 12cm
Main Product Description: The FloPlast Push Fit Waste 90Degree Knuckle is a high-quality plumbing component designed for use in waste piping systems. It offers easy installation and durability, making it an ideal choice for various applications. Available in different sizes, including 32mm, 40mm, and 50mm, the knuckle bend ensures seamless connections and efficient water flow within your plumbing network.
Features:
- Easy Installation: The push-fit design allows for quick and hassle-free installation without the need for additional tools or adhesives.
- Durable Materials: Constructed from robust materials, the FloPlast Push Fit Waste 90Degree Knuckle is built to withstand the demands of plumbing systems.
- Versatile Sizing: Available in various sizes, including 32mm, 40mm, and 50mm, this knuckle bend caters to a range of pipe diameters.
- Grey Color Option: The 50mm size is exclusively available in grey, providing a neutral color choice for your plumbing system.
Benefits:
- Enhanced Performance: The FloPlast Push Fit Waste 90Degree Knuckle contributes to improved water flow and overall system efficiency.
- Time-Saving Installation: The push-fit design simplifies the installation process, saving time and effort.
- Robust Construction: The durable materials ensure the knuckle bend can withstand the rigors of plumbing applications.
- Versatile Compatibility: The availability of different sizes and color options allows for compatibility with various pipe diameters and aesthetic preferences.
The Knipex Protective Jaws are ideal for protecting round workpieces from marring or scratching. The Jaws also prevent any damage by covering all of the teeth on the tool and provide a smooth gripping surfaces. 3 pairs supplied.
The Starrett SB6-A Reciprocating Blade Kit contains a selection of unified shank 3X POWER Bi-Metal reciprocating blades. They provide up to three times the life and increased cutting rates compared to our previous line, setting a new level for performance and value on the market. With an optimised tooth pitch for a reduction in vibration, offering cleaner cuts and less fatigue. They are unbreakable; providing safety and reliability. Contains: 1 x B66 Wood Cutting Blade 152 x 19 x 0.89mm, 6 TPI1 x B610 Multipurpose Blade 152 x 19 x 0.90mm, 10 TPI1 x B614 Metal Cutting Blade 152 x 19 x 0.90mm, 14 TPI1 x B618 Metal Cutting Blade 152 x 19 x 0.90mm, 18 TPI1 x B624 Metal Cutting Blade 152 x 19 x 0.90mm, 24 TPI
The Flexipads Wool Bonnet is made from ultimate Merino sheepskin wool, which has a unique double skin, making it very long-lasting. It is a professional, world-renown bonnet used by prestige car manufacturers. With GRIP fastening. Made in Great Britain. Specification: Wool Pile: 20mmMax. Speed: 2,500 rpm1 x Flexipads World Class GRIP Wool Bonnet 50mm
John Guest push-fit acetal two way divider fitting splits supply to two equal supply feeds. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65oC max). All John Guest fittings are manufactured and assembled in the UK.
Rigid and hardwearing acetal copolymer material with an EDPM O-Ring
Suitable for potable liquids and intermittent hot water applications up to 65oC max (not suitable for air, pneumatic or vacuum applications)
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
The DEWALT Multi-Tool Blade is a flexible scraper blade for surface removal of a wide range of materials. The blade is ideal for the following applications:Removing floor tile adhesives.Removing sealants around baths and sinks. Blade width: 35mm.
The Stanley Moulded Body Surform® Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The blade is reversible for bull nose work, and it has a lightweight plastic moulded body with a thumb screw for quick release. Fitted with a 140mm (5.1/2in) fine cut blade. The blade can be changed without the use of additional tools. Overall Length: 155mm (6in).
Stanley SharpShooter Type G heavy-duty staples. Also known as Type: 4, 11 or 140. Fits Stanley: 69-809, FMHT0-74997, TR60, TR100 series, TR200 series, TRE500 series, PHT150 and G11.1 x Pack of 1000 Stanley TRA709T Heavy-Duty Staples 14mm
The STANLEY Essentials Cantilever Toolbox features a 3 tier compartment system that unfolds as the box is opened, allowing for hassle-free access to contents. There are two organiser compartments built within the top of the lid that can be used to store small parts. Fitted with an ergonomic handle and secure metal front latches for easy opening and closing of the lid. A top padlock eye has been included to keep your items safe and secure. Designed for DIYers and anyone that would require customised storage around the home. Specification: Dimensions: 490 x 285 x 255mmMax. Load: 22kg
This single pinion hand drill has an aluminium gear wheel.It has a 3-jaw self centring chuck 5/16in (8mm), a black japanned finish,and is fitted with comfortable plastic handles.
