150mm Extractor Fan Standard
_This model is designed for simple switching on / off from a separate switch, e.g. light switch or spur unit (not supplied). It does NOT have a run-on timer. Normally used in a kitchen / utility or large bathroom (outwith zone 2) location.
_Mains 230/240V AC 50HZ. Power consumption: 25 watts.
_Extraction rate 68 litres per second, 245 cubic metres per hour
_Airvent is part of the Vent Axia group. IP22 rated. CE approved
_Dimensions: 225mm wide x 218mm tall x 46mm deep (beyond installed surface). 145mm diameter spigot, extends for 110mm. For connection to 150mm / 6 inch ducting
Plasplug HW 124 White Single Hollow Door Hook, suitable for hollow doors and partitions, with an integral fixing and screw. Recommended Drill Bit Size: 8.5mm.
Enhance your plumbing installations with the McAlpine BSP female to BSP male coupling. Crafted from durable polypropylene, this compact 2 Inch length fitting offers a secure, leak-free compression connection—ideal for extending trap height in domestic and commercial settings. It is part of McAlpine's Multifit range, which is designed to be compatible with a variety of pipe materials and sizes.Key Features & Benefits:
Versatile BSP Compatibility – ideal for standard UK sink, basin, bath, and waste trap assemblies
Space-Saving Design – Only 2 Inch long, perfect for tight spaces where extended trap height is required
Robust Polypropylene Build – High-grade, corrosion‑resistant material ensures long-lasting performance and dependable sealing
Quick & Easy Installation – Compression-style coupling fits straight into existing BSP threaded waste systems without additional tools
Trade-Proven Quality – McAlpine’s Plastic & Chrome Fittings range is designed for professional plumbers and DIY enthusiasts alike
The McAlpine CONFLEX-200 is a flexible connector that is designed to connect a condensing boiler to a rigid (19/23mm) or flexible (25mm) condensate discharge pipe. Like the CONFLEX-300, the CONFLEX-200 is also designed to provide a flexible joint that can accommodate any movement or vibration of the boiler or the discharge pipe, ensuring a secure and reliable connection.
The CONFLEX-200 is made from high-quality materials that are resistant to corrosion and can withstand high temperatures. The connector is constructed with a flexible EPDM rubber sleeve that is reinforced with a stainless steel braid for added strength and durability. The connector also features a compression fitting that allows for easy installation and removal without the need for special tools or equipment.
Similar to the CONFLEX-300, the CONFLEX-200 is also designed to prevent the backflow of condensate into the boiler. The connector features a built-in air break that ensures that any condensate that flows back into the connector is discharged safely and efficiently.
Compared to the CONFLEX-300, the CONFLEX-200 is slightly shorter and has a smaller diameter, making it a better option for boilers with tighter spaces or smaller pipes. However, it may not be as suitable for larger boilers or pipes as the CONFLEX-300.
Overall, the McAlpine CONFLEX-200 is a reliable and versatile connector that is ideal for connecting condensing boilers to condensate discharge pipes, especially in cases where space is limited or smaller pipes are involved.
・ Available in 200mm and 300mm lengths
・ Universal connections suitable for 19/23mm rigid pipe and 25mm flexible pipe
・ Easy connection to boiler condensate discharge pipe
・ Allows for disconnection in freezing conditions for discharge to be redirected into a receptacle
・ Conforms to BS 6798:2009 and Building Regulations Approved Document H
The Faithfull Essentials Dutch Hoe has a head manufactured from heat-treated (hardened) carbon steel to provide both strength and durability. The polypropylene and powder-coated finish provide improved resistance to rust, scratches, humidity and alkalis in the soil. The handle is manufactured from tubular steel with a hard-wearing polypropylene coating, making it comfortable to use. Best used for clearing surfaces where there is only light growth and is designed to be pushed or pulled through the soil, cutting the roots off weeds just under the surface. Dutch hoe blades will cut in either a forward or backward movement and will glide through the soil with ease. A small head makes it very easy to negotiate carefully around tender new shoots. Overall Length: 1420mmBlade Width: 120mm
The McAlpine ST90CPB-S-HP is a high-performance shower trap designed to efficiently remove waste water from a shower tray. It has a water seal of 90mm x 50mm and a 2" universal outlet, which can accommodate various plumbing configurations.
The high-flow design of the trap allows for quick and efficient drainage, ensuring that water does not accumulate in the shower tray. The trap also features a removable 110mm flange, which makes it easy to clean and maintain.
Overall, the McAlpine ST90CPB-S-HP is a reliable and effective option for any shower installation, providing both performance and convenience.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 2" Universal
The McAlpine T5 Pushfit 90° Knuckle Overflow Bend x BSP Coupling Nut is a plumbing component designed for use in overflow systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The overflow bend is made from high-quality materials, ensuring durability and longevity. It features a 90° knuckle bend design, which provides a smooth and efficient flow of excess water in overflow systems. The pushfit mechanism makes it easy to install and requires no special tools or equipment.
The BSP coupling nut allows for easy and secure connection to the overflow pipe. It features a standard BSP thread, which is compatible with a wide range of plumbing systems.
The McAlpine T5 Pushfit 90° Knuckle Overflow Bend x BSP Coupling Nut is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in overflow systems for sinks, baths, and other plumbing fixtures.
The pushfit mechanism of the overflow bend allows for easy and secure installation, ensuring a tight and leak-free fit. The 90° knuckle bend design provides a smooth flow of excess water, preventing any potential damage to plumbing fixtures and ensuring optimal performance of the overflow system.
Overall, the McAlpine T5 Pushfit 90° Knuckle Overflow Bend x BSP Coupling Nut is a reliable and effective plumbing component that provides a secure and efficient solution for managing excess water in overflow systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼" and 1½" sizes
Monument Clean & Polish Pads are suitable for cleaning, polishing, rust removal, scrubbing and blending. They are rust proof, washable and will not break up during use. Size: 50 x 250 mm pads, medium grit.
The VELCRO® Brand ONE-WRAP® Tree Ties are easy-to-use, a no knots securing solution for staking and training. It is fully adjustable, durable and reusable. Simply wrap and press to secure, it's soft lining ensures the tie does not cut into the stem as the tree grows. It is weatherproof and supplied as a cut to size roll. How to use: Cut to length, allowing sufficient overlap for a secure hold.Wrap tie around plant.For added strength, increase overlap. Colour: Green.Size: 5m x 50mm.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
A range of straight wooden broom handles supplied in a variety of lengths and diameters to fit most broom heads.Length: 1219mm (48 inch)Diameter: 23 mm (15/16in) Fits the following Faithfull brooms:FAIBRBASS9 - DECK SCRUB 225mm FAIBRCOCO12 - SOFT COCO 300mmFAIBRBASS12 - STIFF BASSINE 300mm
Main Product Description:
The FloPlast Boss Adaptor is a solvent weld 40mm black fitting designed for installation with 43mm (1 1/2 inch solvent weld) pipe or fittings. It is manufactured from PVC-U material, offering strength, durability, and ease of installation. This adaptor is suitable for high temperature waste discharge applications, making it ideal for various plumbing projects.
Features:
- Made for installation with 43mm (1 1/2 inch solvent weld) pipe or fittings
- Manufactured in PVC-U for strength and durability
- Lightweight and easy to work with
- Suitable for high temperature waste discharge
- Available in both black and grey colors
Benefits:
- Enhances the performance of the waste system by forming a seal when connecting to the specified diameter waste pipe
- Compatible with FloPlast Boss Fittings for seamless integration into the system
- Can be used with other FloPlast adaptors such as 32mm and 50mm solvent weld fittings
Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on stone and concrete. By presenting the disc to the work piece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Stone Grinding Disc 230 x 6 x 22.23mm
The Hultafors Adjustable Plasterer's Square has millimetre and degree graduations that can be set in 4 fixed positions (22.5°, 45°, 67.5°, 90°). There is an additional 21 angles marked on the scale. The stock and blade are made from anodized aluminium. They can be folded together, making it easy to store and transport, and also be switched between right and left position. Specification: Blade Length: 900mm
John Guest equal elbow push-fit fitting connects two equally sized pipes to form a 90° pipe bend. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
John Guest equal elbow push-fit fitting connects two equally sized pipes to form a 90° pipe bend. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
John Guest equal elbow push-fit fitting connects two equally sized pipes to form a 90° pipe bend. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of service type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
These Forgefix Sleeve Anchors are through fixing, for ease of use and speed of installation. Their sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths. They have a reduced outside sleeve diameter compared to thread size for smaller hole sizes, offering reduced stress in base materials. The anchors are Zinc Yellow Passivated for increased resistance to corrosion and have hexagonal heads. Also known as 'Loose Bolt' sleeve anchors. APPLICATIONWidely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion. The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools.Sleeve Anchor Fixing Hex Bolt M8 x 85 Bag 10
McAlpine 1�" Black Anti-Syphon adaptor whose valve neutralises negative syphonic pressure and eliminates gurgling. Can be used with a bottle trap on it's own. Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling Multifit Compression Outlet suits all plastic, copper and lead pipes AAV Trap Adaptor makes any Trap Anti-Syphon Manufactured in ABS Available in Black or White
Introducing the McAlpine BW5 1½" Backnut Bath Waste, a reliable and durable plumbing component for your bathtub. This bath waste is designed to efficiently drain water from your bathtub, while preventing unwanted debris from clogging your pipes.
Crafted from high-quality materials, this bath waste features a chrome plated plastic flange measuring 70mm in diameter and a 1½" tail that is unslotted. The plug is included with the waste to ensure a tight seal and prevent any water leaks.
Installation of the McAlpine BW5 1½" Backnut Bath Waste is easy, and it can be done by homeowners, DIY enthusiasts, or professional plumbers. The backnut design allows for a secure and tight fit, ensuring that the waste will not become loose over time.
This bath waste is an ideal choice for anyone looking to replace or upgrade their current bathtub waste system. Its durable construction and efficient design make it a reliable component for any plumbing system.
In summary, the McAlpine BW5 1½" Backnut Bath Waste is a high-quality, durable, and efficient plumbing component for your bathtub. Its easy installation, secure fit, and included plug make it an ideal choice for homeowners, DIY enthusiasts, and professional plumbers alike. Upgrade your bathtub waste system today with the McAlpine BW5 1½" Backnut Bath Waste.
・ Choice of Black PVC or Chrome Plated Plastic plug
・ 1½" BSP
・ Chrome Plated plastic Backnut
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ 1½" Tail
Main Product Description:
The FloPlast Compression Waste Tee 40mm White is a versatile and reliable solution for connecting and managing wastewater systems. It is made of durable polypropylene material, suitable for use with both plastic and copper pipes. The compression fitting allows for easy installation without the need for solvent welding. This product complies with relevant standards such as BS EN 1451-1:2000 and BS 5254, ensuring high quality and safety.
Features:
- Suitable for use with plastic and copper pipes
- Compression fitting for easy installation
- No solvent welding required
- Complies with BS EN 1451-1:2000 and BS 5254 standards
Benefits:
- Durable polypropylene material for long-lasting performance
- Quick and easy installation without the need for solvent welding
- Complies with relevant standards for safety and quality
- Suitable for a variety of wastewater system applications
Gorilla Tubs are flexible, which is the key to the millions of jobs they can perform. They are great for mixing small batches of plaster and mortar; if the mix dries, a few kicks to the flexible body will remove the muck easily. They can be carried with both handles in one hand, shaped for pouring, pressed flat to the floor for scooping, pushed flat against a wall for scraping wallpaper into, catching leaks and so on. Gorilla Tubs are extremely durable and long lasting. The handles have been EU tested and have a working weight of 100 kilos (220 lb), so really heavy loads can be carried between two people. Gorilla Tubs can be used as tool bags, water tubs, rubble removers, roofing, scaffold knuckles, collecting bits, broken glass carrier etc. Features:Infinitely Versatile.Super Flexible.Frost proof.UV Sunlight Proof.Handles CE Tested.Reinforced in key areas for durability.Ribbed profile for strength.The GORTUB14BLK Gorilla Tub Small Size 14 Litre (3 gal) has the following dimensions: Height: 23cm.Diameter: 32cm.Colour: Black.
The McAlpine Indian Ivory Strainer Plug is a plumbing accessory used for preventing debris and other unwanted objects from going down the sink drain. It is designed to fit into the sink waste hole and has a strainer basket on top to catch any solid material. The plug has a traditional Indian Ivory finish and is made from durable materials that can withstand frequent use. The strainer plug comes with a chain that can be attached to the sink to prevent it from getting lost. The McAlpine Indian Ivory Strainer Plug is an essential component of any sink plumbing system and can help to prevent blockages and damage to pipes.
・ Mounted on Card with Hanging Slot
・ Indian Ivory Strainer Plug
・ Supplied with Rubber Seal
McAlpine Shower trap and Flexible connector finished in Brushed Brass is designed to provide efficient drainage for shower trays. The flexible connector provides flexibility for a variety of plumbing configurations. Suitable for shower trays with a 90mm waste hole With Flexible connector for ultimate flexibility to suit any angle 50mm Water Seal Shower Trap 1�" BSP Thread
The Stanley FatMax® Stubby Ratchet Screwdriver is ideal for use in small, confined spaces. It has a large soft-grip handle that fits in the palm for comfortable use and it has a 3-position ratchet to allow right, left and fixed positions. The screwdriver has a fine 40 tooth ratchet, offering very high torque. It features inbuilt bit storage.
Enhance your plumbing installations with the McAlpine BSP female to BSP male coupling. Crafted from durable polypropylene, this compact 2 Inch length fitting offers a secure, leak-free compression connection—ideal for extending trap height in domestic and commercial settings. It is part of McAlpine's Multifit range, which is designed to be compatible with a variety of pipe materials and sizes.Key Features & Benefits:
Versatile BSP Compatibility – ideal for standard UK sink, basin, bath, and waste trap assemblies
Space-Saving Design – Only 2 Inch long, perfect for tight spaces where extended trap height is required
Robust Polypropylene Build – High-grade, corrosion‑resistant material ensures long-lasting performance and dependable sealing
Quick & Easy Installation – Compression-style coupling fits straight into existing BSP threaded waste systems without additional tools
Trade-Proven Quality – McAlpine’s Plastic & Chrome Fittings range is designed for professional plumbers and DIY enthusiasts alike
This Teng Tools torque wrench is manufactured according to DIN 3122 standards. With a ratchet head, the torque wrench can be used for both tightening and final checking of the torque. The wrench is equipped with an angular gauge for after tightening. It is graduated in both Nm and ft.lb, and has a degree scale for after tightening of cylinder heads. The ratchet head has a satin finish and for comfort and excellent grip, the wrench has a rubber handle. Accuracy: ± 4%.Drive: 1/2in square drive.The TEN1292AGEP has the following specifications: Range Nm: 40 to 200. Range ft.lb: 30 to 150. Scale: 1.0Nm/ 1.0ft.lbLength: 465mm.
The McAlpine WU1A 1¼" Urinal Waste is a plumbing fitting used to connect a urinal to the waste pipe. It has a 60mm flush flange that fits into the urinal outlet and a 3½" tail with a backnut that connects to the waste pipe.
Here is a breakdown of the components:
1¼" refers to the diameter of the waste outlet that fits into the urinal.
60mm flush flange is the part that sits inside the urinal outlet and creates a seal to prevent leaks.
3½" tail is the part that extends from the flush flange and connects to the waste pipe.
Backnut is the threaded cap that secures the tail to the waste pipe.
Overall, the McAlpine WU1A is designed to provide a secure and leak-free connection between a urinal and the waste pipe.
・ Available with Chrome Plated Plastic or white plastic tail
・ 1¼" BSP
・ 60mm Flush Flange
・ 3½" Tail
・ Manufactured in Polypropylene
The McAlpine STW4-M is a 50mm water seal resealing shower trap with a multifit outlet. This trap is designed to be used in shower and wet room installations, where it helps to prevent the build-up of unpleasant odours by trapping water in the waste pipe and preventing sewer gases from entering the room.
One of the key features of the McAlpine STW4-M shower trap is its resealing mechanism. This trap is designed to allow water to flow through it freely, but if there is no flow for an extended period, the trap will automatically reseal itself to prevent any sewer gases from entering the room.
Another important feature of the McAlpine STW4-M is its multifit outlet. This allows the trap to be connected to a range of waste pipe sizes and types, making it a versatile option for a wide range of plumbing installations.
The McAlpine STW4-M shower trap is also easy to install, thanks to its simple design and the fact that it can be easily removed for cleaning and maintenance. Its compact size makes it well-suited to installations where space is limited, while its durable construction ensures that it will provide reliable and long-lasting performance.
Overall, the McAlpine STW4-M 50mm Water Seal Resealing Shower Trap with Multifit Outlet is a high-quality and versatile trap that is well-suited to a wide range of shower and wet room installations. Its resealing mechanism, multifit outlet, and easy installation make it a popular choice for both domestic and commercial plumbing installations.
・ Available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 95° Bend - BSP coupling nut x 1½" Multifit
These Flexipads pads are made from the highest quality German foam, backed with velour for use with a GRIP® backing pad. They are used to create a high gloss without haze or holograms.This Black finishing pad features a soft waffle pattern for advanced compound control.
Roughneck 4 Piece Bolster & Chisel Set with Non-Slip Guards is manufactured from drop-forged and heat-treated superior quality chrome vanadium steel to ensure outstanding toughness and long-life performance. The 45 degree single chamfer cutting edge offers the optimal balance between cutting performance and longevity. Each piece is equipped with a patented non-slip guard that securely locks onto the shaft. Eliminates the age-old problem of grips slipping up the shaft during impact. Additionally, the guard can be removed within seconds to improve access in tight areas or to aid flush cutting. This 4 piece set contains: 1 x Cold Chisel with Non-Slip Hand Guard: 25 x 279mm (1 x 11in)2 x Brick Bolsters with Non-Slip Hand Guards: 76 x 279mm (3 x 11in) and 102 x 279mm (4 x 11in)1 x Concrete Pick with Non-Slip Hand Guard: 4 x 279mm (5/32 x 11in)
The ABUS 165 Series Combination Padlock with 3-digit (20mm and 30mm) or 4-digit (40mm) resettable combination. It has a tough solid brass body and a steel shackle. Ideal for luggage, sports equipment etc. Low to medium security requirement where convenience of use is a high priority (e.g. schools, companies).Overall width: 40mmOverall height: 81mmOverall depth: 18mm Shackle width: 21.5 mm I.D.Shckle height: 27.5mmShackle Diameter: 6mm
The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm). Manufactured to DIN 338 LN / BS328 / ISO 235. Specification Flute Geometry: Standard Helix, Left hand spiral.Point Angle: 118°.Material: High Speed Steel.Tip diameter: 2.50mm.Working length: 30mm. Overall length: 57mm.
The SC Johnson Professional Mr Muscle® Kitchen Cleaner kills 99.99% of germs. Formulated to easily tackle tough kitchen grease and grime found in busy workplace kitchens.
