The McAlpine BATHTRAP50-CPB is a bath trap designed to prevent odours and gases from entering the bathroom through the waste pipe. It has a 50mm water seal to prevent the backflow of gases from the drainage system, and a chrome-plated brass finish for an aesthetically pleasing appearance.
The bath trap features a 1½" universal outlet, which means it can be connected to most standard waste pipes. The universal outlet also allows for easy installation and maintenance.
Overall, the McAlpine BATHTRAP50-CPB is a high-quality bath trap that provides effective protection against unpleasant odours and gases. Its chrome-plated brass finish also makes it a stylish addition to any bathroom.
・ Available with 25mm or 50mm Water Seal
・ 1½" Universal Outlet
・ Manufactured in Chrome Plated Brass
Peace of mind protection from accidental pipe disconnection
JG Speedfit collet cover prevents the accidental removal or tampering with piping. The pipe can be inserted with the collet cover already attached to the push-fit fitting or the cover can slide into position afterwards. Designed, manufactured and assembled in the UK.
Features and benefits
Colour coded for easy identification of supply type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
Plasson PE to Lead Adaptor for use above or below ground. Convert metric fitting to imperial pipe. Easy to install. Cost effective way of joining old Alkathene and Irish black pipes to Metric PE. Reduces stock range as one fitting fits all with adaptors. Ensures water tight fit for all pipes. Simple and easy to fit. 0. 0. 0
The McAlpine STW2-R 50mm Water Seal Resealing Shower Trap with Multifit Outlet is a plumbing component used to connect the waste pipe from a shower to the drainage system. The STW2-R trap is designed to be installed below the shower tray and is commonly used in residential and commercial plumbing installations.
The STW2-R shower trap features a 50mm water seal, which helps to prevent foul odours and gases from escaping from the drainage system and entering the living space. The water seal also helps to prevent blockages by trapping debris and preventing it from entering the drainage system.
The resealing feature of this trap ensures that it remains hygienic and clean, as the internal membrane creates a barrier that prevents wastewater from re-entering the shower unit. The multifit outlet allows for easy connection to a range of waste pipe sizes and types, making it a versatile choice for a variety of plumbing applications.
The trap also features a removable grid, which allows for easy cleaning and maintenance. This is important as it prevents debris from clogging the trap, which can cause blockages and odour problems.
Overall, the McAlpine STW2-R 50mm Water Seal Resealing Shower Trap with Multifit Outlet is a reliable and effective plumbing component that is suitable for use in a range of different plumbing installations. It is particularly useful in situations where a resealing trap is required to maintain hygiene and prevent wastewater from re-entering the shower unit.
・ Available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 95° Bend - BSP coupling nut x 1½" Multifit
The McAlpine WP3T is a white PVC plug designed for use in plumbing systems, specifically for 1 1/2" waste pipes or other plumbing fixtures. Like the McAlpine WP3, the WP3T plug is made from high-quality PVC material that is durable, resistant to corrosion and damage from chemicals.
The main difference between the WP3T and the WP3 is that the WP3T plug has a triangular shape at the end. This design allows the plug to fit more securely into pipes or fixtures with a slight triangular taper, providing a more effective seal and preventing any leaks or smells from escaping the pipe or fixture.
The WP3T plug is easy to install and remove, making it a convenient solution for plumbing maintenance and repairs. It is designed for use with McAlpine products, but can also be used with other compatible plumbing systems.
Overall, the McAlpine WP3T plug with triangle design is a reliable and effective solution for sealing off waste pipes and other plumbing fixtures. Its durable PVC construction, triangular shape, and easy-to-install design make it a dependable option for preventing leaks and odours in plumbing systems.
・ Available in 1½"and 1¾"
・ Available with or without triangle
・ Manufactured in White PVC
The McAlpine WP1 is a white plastic plug with a rubber seal designed for use in plumbing systems. It is designed to fit into the end of a waste pipe or other plumbing fixture to prevent water or other fluids from flowing through the pipe or fixture.
The plug is made from durable plastic material, which is resistant to corrosion and damage from most chemicals commonly found in plumbing systems. The rubber seal provides a watertight and secure fit, preventing any leaks or smells from escaping the pipe or fixture.
The WP1 plug is designed for use with McAlpine products, but can also be used with other compatible plumbing systems. It is easy to install and remove, making it a convenient solution for plumbing maintenance and repairs.
Overall, the McAlpine WP1 plug with rubber seal is a simple and effective solution for sealing off waste pipes and other plumbing fixtures. Its durable plastic construction and watertight rubber seal make it a reliable option for preventing leaks and odours in plumbing systems.
・ Nozzle will connect to 1½" Multifit
・ Can accept discharge from a washing or dishwashing machine
・ Manufactured in polypropylene
The McAlpine X10 75mm Water Seal Straight Through Trap with 1¼" Multifit Outlet and Cleaning Eye is a plumbing fitting that is designed to provide a water seal between a waste pipe and a variety of different appliances, such as sinks, baths, and showers.
The trap features a 75mm water seal, which prevents foul smells and gases from escaping into the room, and a 1¼" multifit outlet, which allows for easy installation with a range of different waste pipe materials.
In addition, the trap also includes a cleaning eye, which allows for easy access and cleaning of the trap, helping to maintain the performance and reliability of the plumbing system.
To install the McAlpine X10 75mm Water Seal Straight Through Trap, simply attach the trap to the waste outlet of the appliance using the 1¼" multifit outlet. The trap should then be connected to the waste pipe using the appropriate fittings, ensuring that the cleaning eye is easily accessible for future maintenance and cleaning.
It's important to ensure that the McAlpine X10 75mm Water Seal Straight Through Trap is installed correctly to prevent any leaks or other plumbing issues. If you're unsure about how to install the trap, it's recommended that you consult with a professional plumber for assistance.
・ 1¼" Inlet and Outlet
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Includes Cleaning Eye
・ Inlet and outlet connections are directly in-line allowing for neat plumbing behind basin pedestals
The McAlpine FGTOP6SS 150mm Square Polished Stainless Steel Tile is a stylish and practical plumbing accessory that is designed for use in shower and wet room installations. It is made from high-quality polished stainless steel that is resistant to corrosion and damage caused by water and chemicals.
The FGTOP6SS tile features a removable grid and securing screws that make it easy to access the waste system for cleaning and maintenance purposes. The tile is also designed with an ABS adaptor that makes it easy to connect to the waste pipe.
The square shape of the tile and the polished finish make it an attractive addition to any bathroom or wet room installation. It is also easy to install, and the removable grid feature makes it easy to clean and maintain.
Overall, the McAlpine FGTOP6SS 150mm Square Polished Stainless Steel Tile is a reliable and practical plumbing accessory that is designed to work seamlessly with McAlpine's range of shower and wet room products. Its high-quality construction, attractive design, and easy maintenance make it an ideal choice for use in both residential and commercial bathroom installations.
・ Tile has ABS Spigot Adaptor for solvent welding to Clamp Ring
・ Can be interchanged with a White ABS Tile
Introducing the McAlpine BW5 1½" Backnut Bath Waste, a reliable and durable plumbing component for your bathtub. This bath waste is designed to efficiently drain water from your bathtub, while preventing unwanted debris from clogging your pipes.
Crafted from high-quality materials, this bath waste features a chrome plated plastic flange measuring 70mm in diameter and a 1½" tail that is unslotted. The plug is included with the waste to ensure a tight seal and prevent any water leaks.
Installation of the McAlpine BW5 1½" Backnut Bath Waste is easy, and it can be done by homeowners, DIY enthusiasts, or professional plumbers. The backnut design allows for a secure and tight fit, ensuring that the waste will not become loose over time.
This bath waste is an ideal choice for anyone looking to replace or upgrade their current bathtub waste system. Its durable construction and efficient design make it a reliable component for any plumbing system.
In summary, the McAlpine BW5 1½" Backnut Bath Waste is a high-quality, durable, and efficient plumbing component for your bathtub. Its easy installation, secure fit, and included plug make it an ideal choice for homeowners, DIY enthusiasts, and professional plumbers alike. Upgrade your bathtub waste system today with the McAlpine BW5 1½" Backnut Bath Waste.
・ Choice of Black PVC or Chrome Plated Plastic plug
・ 1½" BSP
・ Chrome Plated plastic Backnut
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ 1½" Tail
Quickly and securely connects three pipes of unequal size
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
The McAlpine FBW2P is a bath combined waste and overflow designed to provide a reliable and efficient solution for draining water from a bathtub. It features a 70mm stainless steel flange, a stainless steel overflow grating, and a plug and chrome plated chain with a centre pin model.
The combined waste and overflow is made from high-quality materials, including stainless steel, ensuring that it is durable and long-lasting. It is designed to be easy to install and is suitable for use in a range of domestic and commercial applications.
The stainless steel overflow grating helps to prevent blockages and keep the bathtub clean and hygienic, while the plug and chrome plated chain provide a reliable and easy-to-use solution for closing the waste outlet.
Overall, the McAlpine FBW2P is a high-quality bath combined waste and overflow that provides a reliable and efficient solution for draining water from a bathtub. Its stainless steel flange, overflow grating, and plug and chrome plated chain make it a popular choice for many plumbing applications, providing a combination of functionality and style.
・ Available in 1¼" and 1½" sizes
・ 70mm stainless steel flange
・ Stainless steel overflow grating
・ Black PVC plug and CP chain
・ Flexible overflow tube has OD of 25mm
The McAlpine M/Fit Blank Cap 1.1/4 S23U" is a plumbing component that is used to cap or seal off a pipe. The blank cap is designed to fit onto a 1.1/4 inch pipe with a S23U" end, providing a tight and secure seal.
The M/Fit blank cap is part of the McAlpine Multifit range, which is designed to provide a versatile and reliable solution for a range of plumbing applications. The blank cap is made from high-quality materials, ensuring durability and long-lasting performance.
The cap features a simple, one-piece design that makes installation quick and easy. It can be used to cap off a pipe temporarily or permanently, depending on the requirements of the plumbing system.
Overall, the McAlpine M/Fit Blank Cap 1.1/4 S23U" is a reliable and cost-effective solution for sealing off pipes in a range of plumbing applications. It is widely used in both domestic and commercial plumbing systems and is a popular choice among plumbers and builders for its durability and ease of use.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
・ Manufactured in Polypropylene
The McAlpine Fitting Reducer 2" X1.1/2" Zt26L is a plumbing fitting used to reduce the size of a 2 inch pipe to a 1.1/2 inch pipe. The "Zt26L" in the description refers to the specific model of the reducer, which is manufactured by McAlpine, a UK-based company that specializes in plumbing and drainage products.
The reducer has a 2 inch end that fits over a 2 inch pipe and a 1.1/2 inch end that fits inside a 1.1/2 inch pipe. The reducer is designed to create a secure, leak-free connection between the two pipes.
Overall, this type of fitting reducer is commonly used in plumbing applications where pipes of different sizes need to be connected. The McAlpine Fitting Reducer 2" X1.1/2" Zt26L is made from high-quality materials and is designed to provide reliable performance over an extended period of time.
・ Available in 4 sizes
・ Plain end designed to fit in to other fittings or Traps with a compression connection
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine M/Fit Blank Cap 1.1/2 T23U" is a plumbing component used to cap or seal off a pipe. The blank cap is designed to fit onto a 1.1/2 inch pipe with a T23U" end, providing a tight and secure seal.
The M/Fit blank cap is part of the McAlpine Multifit range, which is designed to provide a versatile and reliable solution for a range of plumbing applications. The blank cap is made from high-quality materials, ensuring durability and long-lasting performance.
The cap features a simple, one-piece design that makes installation quick and easy. It can be used to cap off a pipe temporarily or permanently, depending on the requirements of the plumbing system.
Overall, the McAlpine M/Fit Blank Cap 1.1/2 T23U" is a reliable and cost-effective solution for sealing off pipes in a range of plumbing applications. It is widely used in both domestic and commercial plumbing systems and is a popular choice among plumbers and builders for its durability and ease of use.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
・ Manufactured in Polypropylene
The McAlpine TSGCONTV Conversion Kit is a plumbing product designed to convert any TSG1 or TSG2 gully into a sheet flooring gully. The kit includes a white plastic clamp ring, cover plate, and dip tube.
The conversion kit is designed for use with sheet flooring, which is often used in commercial and industrial environments. The dip tube ensures that water is directed into the gully trap, while the clamp ring and cover plate provide a secure and durable cover for the gully.
The TSGCONTV conversion kit is easy to install and can be used to upgrade existing gullies to accommodate sheet flooring. By using this kit, you can ensure that your drainage system is effective and efficient, while also providing a safe and secure flooring solution for your commercial or industrial environment.
Overall, the McAlpine TSGCONTV Conversion Kit is a reliable and effective product that is designed to convert any TSG1 or TSG2 gully into a sheet flooring gully. Its easy installation and durable construction make it an ideal solution for commercial and industrial environments.
・ Conversion Kits enable Gullies except MD100, MD100-3 and FD90 to be converted to different floor finishes
The McAlpine TSG1SS-SL-SC 75mm Water Seal Trapped Gully is a plumbing fixture used in drainage systems. It is designed to prevent foul air or gases from escaping through the drainage system and into living spaces.
The gully features a 75mm water seal, which provides a barrier between the drainage system and the living space. The water seal prevents any gases or smells from the drainage system from entering the living space. The trapped gully also has a 2" horizontal outlet, which connects to the drainage pipe.
The gully comes with a clamp ring and cover plate, which are used to secure the gully in place and provide a finished look. The cover plate can be easily removed for cleaning and maintenance.
Additionally, the McAlpine TSG1SS-SL-SC gully comes with a 2" x 1½" socket reducer. The reducer can be used to connect the gully to a smaller diameter pipe or fitting, allowing for greater flexibility in plumbing installations.
Overall, the McAlpine TSG1SS-SL-SC 75mm Water Seal Trapped Gully is a reliable and effective plumbing fixture that can be used in a variety of drainage systems.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine BSKTOP Stainless Steel Strainer Plug is a plumbing component used in basket strainer waste systems for sinks.
This particular model of strainer plug is made of high-quality stainless steel and features a rubber finger seal connection. It is designed to fit into a basket strainer waste, preventing debris and other materials from entering the waste system.
The McAlpine BSKTOP strainer plug is made by McAlpine, a leading manufacturer of plumbing products in the UK. It is a durable and long-lasting option for sink waste systems, ensuring that the waste system functions properly and efficiently.
Installation of the McAlpine BSKTOP strainer plug should be done by a qualified plumber, following local codes and regulations. It is important to ensure that the strainer plug is installed correctly to prevent leaks and other issues in the sink waste system.
Overall, the McAlpine BSKTOP Stainless Steel Strainer Plug is a reliable and durable option for basket strainer waste systems, featuring high-quality materials and a rubber finger seal connection that ensures a secure fit.
・ Stainless Steel
・ Rubber finger seal connection
Original Cramer CRA 30211 DE acrylic cleaner – for brilliant moments. Showers and bathtubs made of acrylic are increasing in popularity. They feel warm and soft - but their surfaces are also very sensitive. In order to preserve the shine of a new acrylic tub, it requires particularly gentle care. The Cramer acrylic cleaner has been specially developed for these surfaces. It effortlessly removes limescale, soap and dirt deposits and gives the acrylic permanent protection with regular use thanks to its pearling effect. This way, acrylic surfaces retain their original shine and radiance. Description: Acrylic cleaner. Application: For the daily cleaning and care of sanitary surfaces. Surfaces: For all acrylic surfaces in the kitchen and bathroom as well as for fittings and nozzles made of chrome and stainless steel. Maintains brilliant acrylic surfaces. Dirt-repellent thanks to pearling effect. Has an anti-static effect. Environmentally friendly and biodegradable. Use: Apply cleaner to a damp, soft cloth or spray directly onto the surfaces to be cleaned, rub well and leave to work for a short time, then rinse with warm water and rub dry. Note: Do not apply to hot surfaces. Storage: At +5 °C to 30 °C. Minimum shelf life: 10 years. Package contents: 750 ml spray bottle.
The McAlpine WM15 is a plumbing component called a "P trap" that is designed to be used in conjunction with a domestic appliance, such as a washing machine or dishwasher. The trap features an adjustable inlet and a 75mm water seal to prevent the escape of foul odors and gases from the drainage system.
The trap is designed with a 1½" multifit outlet, which can be connected to a standard plumbing pipe using a compression fitting or a solvent weld joint. The 135° swivel inlet connection allows for flexibility in the installation process, enabling the trap to be positioned in a variety of orientations to accommodate the specific requirements of the installation.
In general, P traps are used in plumbing to create a barrier of water that prevents gases and odors from entering a building from the drainage system. The trap works by trapping a small amount of water in the bend of the pipe, creating a seal that prevents the backflow of gases and odors. The McAlpine WM15 is a high-quality component that is designed to provide reliable and long-lasting performance in domestic plumbing applications.
Pipe liner for Metric PE pipe The Plasson range of fittings provide a reliable and durable way of jointing water supply pipes, requiring no special tools to use effectively. WRAS Approved Product - will be accepted by water companies as suitable for drinking water systems. Pipe wall support - ensures the joint far exceeds the end load requirements of WRAS testing. Simple to use - slide into pipe end . Reduces ovalisation - compensates for pipe ovality and ensures a watertight joint . 0. 0. 0
The McAlpine TSG2T6SS is a type of trapped gully designed for use with tiled or grated floors. It features a removable grid for easy cleaning and maintenance, as well as a 75mm water seal to prevent foul odors and gases from escaping through the drain system.
The trapped gully has a 110mm vertical outlet and a 110mm x 2" reducer, making it compatible with standard plumbing installations. Its stainless steel cover plate adds a sleek and modern touch to the design.
Overall, the McAlpine TSG2T6SS is a practical and efficient solution for tiled or grated floors in bathrooms, kitchens, and other areas where water may accumulate. Its design allows for easy installation and maintenance, and the 75mm water seal and secure seal provided by the clamp ring and cover plate ensure that foul odors and gases are kept out of the building.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 75mm Water Seal
・ 110mm Vertical Outlet
・ Supplied with110mm x 2" BS EN 1329-1:2000 solvent spigot outlet
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine SK2 Standard Double Bowl Kit is a plumbing component designed for use in double bowl kitchen sink installations. It is typically used to connect the waste outlets of two bowls to a drainage system.
The SK2 kit includes a number of components, including a 75mm water seal tubular swivel 'P' trap, an adjustable inlet, and two 1½" x 75mm water seal outlets. The kit is designed to be compatible with most standard double bowl kitchen sinks and can be easily installed.
The McAlpine SK2 Standard Double Bowl Kit is made from high-quality materials to ensure durability and long-lasting performance. It is designed to be easy to install and maintain, with a removable trap for easy cleaning.
Overall, the McAlpine SK2 Standard Double Bowl Kit is a reliable and effective solution for double bowl kitchen sink waste management. It provides a high-quality, durable design that helps prevent unpleasant odors and gases from escaping into the surrounding environment, while also being compatible with most standard double bowl kitchen sinks and being easy to install and maintain.
・ Available with 1 or 2 nozzles to accept discharge from domestic appliances
・ Suitable for almost all British and European sinks
・ Supplied with an 1½" x 75mm water seal tubular swivel 'P' trap
・ Multifit Compression Outlet suits all plastic, copper and lead pipeCan accept discharge hose of a domestic appliance
・ Supplied with blanking plugs
The McAlpine SG10 is a plumbing component known as a "P-trap" that is used to prevent sewer gases from entering a building through a drain. It is designed for use with a washbasin or sink and has a 75mm water seal to prevent the escape of gases.
The SG10 is a running tubular swivel P-trap, which means that it is designed to be installed in a horizontal position with the waste pipe running parallel to the floor. The multifit outlet allows the trap to be connected to various waste pipes, while the swivel feature allows the trap to be adjusted to fit different installation requirements.
McAlpine is a UK-based manufacturer of plumbing products that has been in business for over 60 years. Their products are known for their quality and reliability, and the SG10 is no exception. It is made from high-quality materials and is designed to be easy to install and maintain.
・ Available in 1¼", 1½", and 2" sizes
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Manufactured in polypropylene
・ Conforms to BS EN 274-1:2002
The McAlpine S28M-NRV Multifit In-Line Non-Return Valve is a plumbing component designed to prevent water or other liquids from flowing back into the system once they have been pumped out. This is important for maintaining the integrity of the system and preventing contamination.
The valve is designed to be installed in-line with the plumbing system, and it features a top access point for easy cleaning and maintenance. This makes it ideal for use in applications where regular cleaning is required, such as in commercial kitchens or other areas where food or other materials may become trapped in the system.
The valve is part of the McAlpine Multifit range, which means it is compatible with a wide range of plumbing systems and can be easily installed without the need for specialist tools or knowledge. It is made from high-quality materials to ensure durability and long-lasting performance.
Overall, the McAlpine S28M-NRV Multifit In-Line Non-Return Valve is a reliable and effective solution for preventing backflow in plumbing systems, and its top access point makes it easy to clean and maintain.
・ Available in 1¼" and 1½" sizes
・ Prevents back flow of water
・ Must be installed in the horizontal position
・ Should only be used when there is no alternative
・ Universal Connections
The McAlpine FSW2PC Sink Combined Waste and Overflow is a plumbing fitting designed for use with sinks. It combines both the waste and overflow functions into a single unit, providing a simple and efficient solution for draining water from the sink.
The unit features a stainless steel flange with a center pin design, which helps to ensure a secure and stable fit on the sink. It also has a chrome-plated overflow grid and a black PVC plug with a chrome-plated chain, adding a touch of style and functionality to the sink.
The McAlpine FSW2PC Sink Combined Waste and Overflow is made from high-quality materials, ensuring its durability and resistance to wear and tear. It is a reliable and efficient solution for draining water from the sink, and its compact size and simple design make it a popular choice for both residential and commercial applications.
Overall, the McAlpine FSW2PC Sink Combined Waste and Overflow is a practical and stylish plumbing fitting that provides a simple and efficient solution for draining water from a sink. Its high-quality materials, center pin design, and elegant features ensure long-lasting performance and reliable functionality in a wide range of plumbing applications.
・ Available in 1¼" and 1½" sizes
・ Available with 70mm or 85mm flange
・ Chrome Plated Plastic overflow grid
・ Black PVC plug and CP chain
・ Flexible overflow tube has OD of 25mm
The McAlpine BOSSCONN110T-BL is a mechanical soil pipe boss connector designed for use with a 57mm hole saw size. It is supplied with a fixing tool and is suitable for use with 4"/110mm soil pipes.
The boss connector is designed to create a watertight seal around the pipe, preventing leaks and ensuring a reliable connection. The mechanical design means that it can be easily installed without the need for any additional adhesives or sealants.
The BOSSCONN110T-BL is made from high-quality materials and is designed to be durable and long-lasting. It is suitable for use in a wide range of applications, including residential and commercial plumbing projects.
Overall, the McAlpine BOSSCONN110T-BL is a reliable and effective solution for connecting soil pipes, and its mechanical design makes it quick and easy to install.
・ Available to suit 4'/110mm and 3"/82mm soil pipe
・ Available for 1¼" and 1½" waste pipe size
・ Suitable for waste water and condensate discharge
・ Simple dry fixing mechanical connection
・ Universal connection for pushfit or solvent weld waste pipe
The McAlpine ST90CB10-HP2 is a 90mm x 50mm water seal shower trap designed for use in showers. It features a 1½" outlet and a removable 110mm flange, which makes it easy to install and maintain.
The ST90CB10-HP2 model features a high-flow, high-performance trap design that allows for rapid and efficient drainage of water. This is particularly useful for showers that produce a high volume of water, such as power showers or multi-jet shower systems.
Like the standard ST90CB10 model, the ST90CB10-HP2 also features a water seal trap design that prevents foul odours from entering the bathroom by trapping water in the trap. The 90mm x 50mm size is suitable for most standard shower installations.
The removable 110mm flange is a useful feature that allows for easy access to the trap for cleaning and maintenance purposes. This makes it easy to keep the trap clean and free from blockages, ensuring that the shower continues to function properly.
Overall, the McAlpine ST90CB10-HP2 shower trap is a reliable and practical choice for anyone looking for a high-flow, high-performance shower trap. Its water seal design prevents foul odours from entering the bathroom, while the removable flange makes it easy to maintain and keep clean. The high-performance trap design ensures efficient drainage of water, making it a suitable option for power showers or multi-jet shower systems.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 1½" Universal
The McAlpine C10AV is a bottle trap designed for use with washbasins or sinks. It features a 75mm water seal and an adjustable inlet that allows it to be easily fitted to a variety of waste pipe sizes. The trap also includes a multifit outlet, making it compatible with a wide range of plumbing systems.
What sets the McAlpine C10AV apart is its anti-siphon or "silentrap" function. This means that the trap is designed to prevent the loss of the water seal and the ingress of foul air, even in the event of negative pressure or vacuum in the drainage system. This is particularly important in buildings with high-rise plumbing systems, as negative pressure can cause water to be sucked out of the trap, breaking the water seal and allowing unpleasant odours and gases to enter the building. The anti-siphon function of the McAlpine C10AV ensures that the water seal remains intact, preventing the ingress of foul air and maintaining the integrity of the plumbing system.
The McAlpine C10AV is a high-quality bottle trap that is easy to install and offers reliable performance. Its adjustable inlet and multifit outlet make it a versatile choice for a range of plumbing applications. The anti-siphon function ensures that the trap continues to function correctly, even in buildings with high-rise plumbing systems, making it an ideal choice for commercial or residential properties where maintaining the integrity of the plumbing system is critical.
・ Available in 1¼" and 1½" sizes
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
The McAlpine BWSTSS 1½" Basket Strainer Waste is a reliable and practical solution for draining sinks, particularly those in commercial or industrial settings. The waste features a 113mm stainless steel flange that is durable and resistant to corrosion and rust, ensuring that it will provide long-lasting performance in harsh environments.
The basket strainer waste is designed to capture food debris, preventing it from clogging pipes and causing blockages. The system comes with a stemball plug, which is easy to use and provides a secure seal to prevent leaks. The centre pin model allows for easy operation of both the waste and overflow functions.
The McAlpine BWSTSS 1½" Basket Strainer Waste is easy to install, with all necessary fittings and components included in the package. The waste is suitable for use with a variety of sink materials, including stainless steel, ceramic, and composite.
The basket strainer waste is also easy to clean, with the basket easily removable for cleaning or replacement. The stemball plug can be easily removed for cleaning or to allow for larger items to be washed in the sink.
Overall, the McAlpine BWSTSS 1½" Basket Strainer Waste is a reliable and efficient solution for anyone looking to drain their sink effectively while also preventing blockages caused by food debris. Its durable construction, easy installation, and easy maintenance make it a great choice for any commercial or industrial sink.
・ Available in Stainless Steel or PVD finish
・ 1½" BSP
・ 113mm flange
・ Stemball Plug
・ 41mm ferrule
The McAlpine BOSSCONN110-BL is a mechanical soil pipe boss connector designed for use with a 57mm hole saw. It is supplied with a fixing tool and is suitable for connecting a 4"/110mm soil pipe.
The BOSSCONN110-BL is made from durable materials and is designed to provide a secure and leak-free connection between a waste pipe and a soil pipe. It can be used in a variety of applications, including connecting a new waste pipe to an existing soil stack or adding a new appliance to an existing waste system.
To use the BOSSCONN110-BL, you will need a 57mm hole saw to create a hole in the soil pipe. The connector can then be inserted into the hole and tightened using the supplied fixing tool. The connector features a rubber seal which ensures a watertight connection between the soil pipe and the waste pipe.
Overall, the McAlpine BOSSCONN110-BL is a reliable and easy-to-use solution for connecting a waste pipe to a soil pipe. It is compatible with a wide range of pipe sizes and is suitable for use in both domestic and commercial applications.
・ Available to suit 4'/110mm and 3"/82mm soil pipe
・ Available for 1¼" and 1½" waste pipe size
・ Suitable for waste water and condensate discharge
・ Simple dry fixing mechanical connection
・ Universal connection for pushfit or solvent weld waste pipe
Introducing the McAlpine 1" Female Blank Cap NUT-BLANK-WH – Streamlined Functionality and Versatility for Efficient Plumbing Solutions!
Elevate your plumbing projects with the McAlpine NUT-BLANK-WH, a high-quality 1" Female Blank Cap designed for reliable sealing and adaptability. Meticulously engineered with precision, this blank cap ensures a secure and leak-free solution for various plumbing applications.
Key Features:
Efficient Blank Cap Design: The NUT-BLANK-WH features a 1" female blank cap, providing a versatile and secure solution for sealing off pipes and fittings. This blank cap is essential for maintaining the integrity of your plumbing system, preventing leaks and ensuring optimal performance.
Durable Construction: Crafted from high-quality materials, this blank cap guarantees durability and longevity. The robust construction ensures resistance to corrosion and wear, making it a dependable component that withstands the demands of everyday plumbing use.
Versatile Application: With its 1" size, the NUT-BLANK-WH offers versatility for various plumbing setups. Whether you're capping unused pipes or sealing off fittings, this blank cap adapts effortlessly, making it an essential tool for both professional plumbers and DIY enthusiasts.
Easy Installation: Designed with user convenience in mind, the McAlpine NUT-BLANK-WH simplifies the installation process. Whether you're an experienced plumber or tackling a DIY project, the straightforward assembly ensures a hassle-free experience, saving you time and effort.
White Finish: The NUT-BLANK-WH features a clean white finish, adding a touch of visual appeal to your plumbing setup. This finish not only enhances the aesthetics but also indicates a sealed connection for quick and easy identification.
Upgrade your plumbing connections with the McAlpine 1" Female Blank Cap NUT-BLANK-WH – where functionality meets versatility. Trust McAlpine to deliver top-notch solutions that not only ensure leak-free connections but also provide a durable and reliable component for all your plumbing needs. Elevate your plumbing game with the NUT-BLANK-WH, setting a new standard in blank cap excellence.
Female Blank Cap for Traps and Fittings with 1_ Male Thread
Blanks off traps and fittings with 1_ male thread
The McAlpine T28M-NRV Multifit In-Line Non-Return Valve is a plumbing component designed to prevent backflow of water or sewage in a drainage system. It is installed in-line with the pipe and allows water to flow in one direction only.
The valve is made of durable plastic and features a top access for easy cleaning and maintenance. This means that if the valve becomes clogged with debris or sediment, it can be easily accessed and cleaned without having to remove the entire valve from the pipe.
The Multifit design of the valve means that it can be used with a variety of different pipe materials and sizes, making it a versatile choice for many different plumbing applications.
Overall, the McAlpine T28M-NRV Multifit In-Line Non-Return Valve with top access for cleaning is a reliable and easy-to-maintain option for preventing backflow in a drainage system.
・ Available in 1¼" and 1½" sizes
・ Prevents back flow of water
・ Must be installed in the horizontal position
・ Should only be used when there is no alternative
・ Universal Connections
Enhance your plumbing installations with the McAlpine BSP female to BSP male coupling. Crafted from durable polypropylene, this compact 2 Inch length fitting offers a secure, leak-free compression connection—ideal for extending trap height in domestic and commercial settings. It is part of McAlpine's Multifit range, which is designed to be compatible with a variety of pipe materials and sizes.Key Features & Benefits:
Versatile BSP Compatibility – ideal for standard UK sink, basin, bath, and waste trap assemblies
Space-Saving Design – Only 2 Inch long, perfect for tight spaces where extended trap height is required
Robust Polypropylene Build – High-grade, corrosion‑resistant material ensures long-lasting performance and dependable sealing
Quick & Easy Installation – Compression-style coupling fits straight into existing BSP threaded waste systems without additional tools
Trade-Proven Quality – McAlpine’s Plastic & Chrome Fittings range is designed for professional plumbers and DIY enthusiasts alike
The McAlpine BSW6PC Centre Pin Sink Waste is a plumbing fitting designed for use with a sink. The waste has an 85mm stainless steel flange that is designed to fit neatly into the sink, and a plug to prevent water from draining away when required.
The centre pin design of this sink waste means that it can be easily installed in a sink with a central waste hole, and the stainless steel construction ensures durability and resistance to corrosion. The waste is also designed to be easy to clean and maintain, helping to keep your sink hygienic and free from blockages.
When installing this sink waste, it is important to follow the manufacturer's instructions carefully to ensure a secure and watertight fit. It is also recommended that you use a professional plumber to install the waste, especially if you are not familiar with plumbing installations.
・ Available in 1¼", 1½" and 2" sizes
・ Black PVC plug
・ Available with or without chain and stay
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
The McAlpine VP2W Ventapipe 25 Air Admittance Valve is a plumbing device that is designed to allow air to enter the drainage system, while preventing foul odors from escaping into the building.
This valve features a 1½" universal outlet, which means that it can be connected to a variety of different pipe sizes and materials. It is suitable for use with waste pipes from sinks, basins, baths, and other similar fixtures.
The VP2W Ventapipe 25 is manufactured by McAlpine, a well-known and respected brand in the plumbing industry. It is designed to meet the highest standards of quality and reliability, and is backed by a manufacturer's guarantee for added peace of mind.
One key feature of the VP2W is its white finish, which helps it to blend in with white PVC pipes and fittings. This can be especially useful for aesthetic reasons, or in situations where the valve is visible.
Overall, if you are in need of an air admittance valve for your plumbing system, the McAlpine VP2W Ventapipe 25 with a 1½" universal outlet and white finish is a great choice to consider. It is easy to install, compatible with a variety of pipe sizes and materials, and manufactured by a trusted brand in the industry.
・ 1½" Universal Outlet
・ A1 rated
・ Air flow capacity of 3 l/s
・ For full information on Air Admittance Valves please see below
The McAlpine CA32MINI-CB is a plumbing trap designed to prevent the entry of foul gases from the sewer system into a building. It is a bottle trap, which means it has a curved section that holds water, creating a barrier that prevents the gases from passing through.
The trap has a compact design that allows it to fit into tight spaces without compromising on performance. It features a 50mm water seal and a chrome-plated brass construction, which provides durability and resistance to corrosion.
The trap also comes with a 12" length of 32mm Ø outside diameter chrome-plated brass waste pipe and wall flange, making it easy to connect to the waste pipe and install on the wall.
Overall, the McAlpine CA32MINI-CB is a reliable plumbing trap that is easy to install and provides a secure and leak-free connection between the pipework and the trap. Its compact size and durable construction make it a popular choice for installations where space is limited, and a high-quality, corrosion-resistant trap is required.
・ 32mm European Outlet
・ 50mm Water Seal
・ Adjustable Inlet
・ Includes 12" length of 32mm OD CP Brass Waste Pipe and Wall Flange
・ Supplied with MS4-32SOLVENT fitting to convert to 1¼" UK pipe size
