JG Lowfit manifold reducer allows any JG Underfloor Manifold port to be converted to a LowFit connection size of 12mm. Simply push the reducer into the JG Speedfit port on both flow and return bars.
Manifold reducer with Speedfit connections
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Suitable for underfloor heating applications only
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Lowfit cold forming bend helps create a tighter and more rigid pipe bend than the minimum allowed when the pipe is unsupported.
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Suitable for underfloor heating applications only
Used in conjunction with Speedfit barrier pipe and conduit,The JG Speedfit conduit elbow push-fit fitting allows the conduit protection to be terminated within the 90° bend. Designed, manufactured and assembled in the UK.
Compatible with plastic or copper pipe
Suitable for hot and cold water and heating applications
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
JG LowFit™ mesh panels are designed to be installed over existing timber or concrete floors, while maintaining a low overall floor height. The 16mm panel is lightweight with high compressive strength.
The mesh layer allows for tiling directly to the panel* and is pre-grooved to include return bends that eliminate the need for additional panel variations.
*In some cases, a decoupling layer may be required, always consult the
flooring supplier for advice.
Ideal solution for laying over timber or concrete floors
Easy to install 16mm panel allows for 12mm pipe applications and a lower overall floor height
High heat output from a low-level floor build
Light-weight system with high compressive strength
Return bends are indented into the board making installation easy.
Mesh layer allows for tiling directly onto the surface, ensuring a lower overall floor height.
Made from 100% recyclable material
Suitable for underfloor heating applications only
JG Underfloor Spreader Plates (From Above) is an underfloor heating (UFH) pipe fixing system designed for use with timber suspended or floating floors, where a low height build up is required.
15mm pipe is installed into single or double grooved aluminium spreader plates that transmit heat evenly across the floor. insulation is placed in the void below the plates to minimise downward heat loss. Ideal for new builds, extensions and renovations, especially first floor levels.
For existing floor structures install between battens and for new floors, fix between existing joists. If the floor can be raised, floors can also be counter-battened to make installation even easier.
Timber floor pipe fixing system
Aluminium heat diffusion plates
Options for traditional or composite joists
Low height build up
Medium heat output and response
Ideal for all room sizes, single or multi room
Suitable for underfloor heating applications only
JG Underfloor Underfit Board is a low-profile underfloor heating (UFH) pipe fixing system designed for existing timber suspended or floating floor structures. Ideal for retrofit projects, the pipe fixing system provides no height build up and is suitable for ground and first floor level applications.
15mm pipe is easily installed into a grooved foil-faced panel over an existing floor, either between battens or under the floor between joists. Maximum pipe circuit length is 100m with a recommended flow temperature of 50-60ºC.
Existing floor pipe fixing system
Lightweight insulated panel
Grooved foil-faced panel with 200mm centres
Low height build up
Medium to low heat output and response (approx. 50-60w/m2)
Ideal for rooms of all sizes and shapes
Suitable for underfloor heating applications only
Single room underfloor heating pack for areas up to 30m2
Single zone control pack suitable for up to 30m2
Ready to plug in, pre-assembled control unit and Grundfos UPM3 circulating pump
2 coils of JG Layflat pipe (15mm x 150m)
JG Aura 230v Thermostat (programmable)
300 x pipe clips and 8 x pipe inserts (15mm)
2 JG Speedfit Equal Tees and 2 Stem Elbows (15mm)
High heat output and response
Anti-vibration mounting bracket for silent operation
Suitable for solid concrete or beam and block subfloors
Manufactured to the highest standards, JG LowFit™ underfloor heating manifolds are made from stainless steel and are available in a range of sizes from 2 to 12 ports.
Fast and simple to install, JG LowFit™ manifolds uniquely feature JG Speedfit push-fit connections and come with a pre-mounted bracket and vibration isolation mount. Manifolds can also be assembled to suit left or right-hand supply.
Each manifold is supplied fully assembled with flow and return rails, adjustable flow meters, an automatic air vent and fill valve. Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold
Fast and simple installation using 12mm Speedfit connections eliminating the need for further reducing adaptors.
Easy to fit due to pre-mounted brackets and vibration isolation mount
Integral Automatic Air Vent discharges air that could impact circulation
Valves on the return manifold are compatible with thermoelectric heads
Rail valves on the return rail allow circuit actuators to be easily connected
Versatile assembly for left or right-hand supply
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
JG Underfloor Overfit Board is a low-profile underfloor heating (UFH) pipe fixing system designed for existing floor structures. Ideal for retrofit projects, the pipe fixing system provides low height build up and is suitable for ground and first floor level applications.
15mm pipe is easily installed into a grooved foil-faced panel over an existing subfloor. Maximum pipe circuit length is 100m with a recommended flow temperature of 50-60ºC.
Existing floor pipe fixing system
Lightweight insulated panel with compressive strength
Grooved foil-faced panel with 200mm centres
Low height build up
Medium to low heat output and response (approx. 50-60w/m2)
Ideal for rooms of all sizes and shapes
Suitable for underfloor heating applications only
